摘要：In order to meet the requirement of network synthesis optimization design for a micro component, a three-level information frame and functional module based on web was proposed. Firstly, the finite element method （FEM） was used to analyze the dynamic property of coupled-energy-domain of virtual prototype instances and to obtain some optimal information data. Secondly, the rough set theory （RST） and the genetic algorithm （GA） were used to work out the reduction of attributes and the acquisition of principle of optimality and to confirm key variable and restriction condition in the synthesis optimization design. Finally, the regression analysis （RA） and GA were used to establish the synthesis optimization design model and carry on the optimization design. A corresponding prototype system was also developed and the synthesis optimization design of a thermal actuated micro-pump was carded out as a demonstration in this paper.

摘要：Rubber isolation is the most mature control technology in practical application, and is widely used by short rigid buildings. However, many high isolation buildings have been built around the world in recent years, which do not follow the existing criterions and codes. Many researchers began to research the special problems caused by larger height-width ratio isolation structures. The overturning effect of high height-width ratio structures with rubber bearing is firstly studied. Considering the main factors, such as the height-width ratio of structures, type of site, the designed basic acceleration of ground motion and the decouple factor in horizon, computing experiment is defined with the Uniform Design Method, which is also known as designing isolation structure. The forces of the bearing under edge of structures based on the position of the rubber bearing are calculated. The result indicates that the rubber bearings will lose its functionality under very high tension and compressing force of earthquake motion in horizon and vertical, when the height-width ratio is over a certain value. Thus, based on the calculation result of isolation structures defined in the uniform design method, regression analysis is conducted, and also the rubber edge force regression formula are gotten, which has higher correlation and smaller standard deviation. This formula can be used to roughly calculate whether the pull force occurs at the edge of the building. By the edge bearings of isolation structure minimum force formula, the height-width ratio limited value of the isolation structure is deducted when rubber bearing has minimum force of zero.

摘要：To improve the electrorheological effect of electrorheological fluid (ERF), a new type of the electrosensitive particle material, polynaphthalene quinone was prepared, whose molecules contain blended atoms of nitrogen, oxygen, sulphur and big π bond conjugate system. In both DC and AC electric fields, the ERF material showed a distinct ER effect. Especially, in the alternating electric field, the shear stress of this material versus AC voltage has a better quadratic relation than that of the other materials. The experimental data showed that organic semiconductor polymers with big π bond conjugate system are a new type of electrosensitive particle materials which are worth well developing.

摘要：[Objective]The aim was to research on construction of yield formation model of winter wheat.[Method]In the case of variety Shijiazhuang 8,the process of yield trait formation was studied by the dynamic ideal and uniform experimental design;the differences between plant dry weight and population indexes were analyzed by using multiple comparison analysis,and the yield formation model was developed by multiple regression analysis.[Result]The results showed that multiple correlation coefficients of yield formation model ranged from 0.91 to 0.97.[Conclusion]The model was significant which provide certain theoretical base for high yield and high efficiency cultivation of winter wheat.

摘要：OWTs （offshore wind turbines） are currently considered as a reliable source of renewable energy. OWT support structures account for 20%-25% of the capital cost for offshore wind installations. Pre-feasibility studies involving estimation of preliminary dimensions of the wind turbine structure need to be performed for initial costing to arrive at the commercial viability of the project. The main objective of the paper is to obtain preliminary configuration for commercial viability and approximate sizing of the foundation pile. Design equations and nomograms are proposed for quick preliminary design of monopile founded wind turbines located offshore of Gujarat. Parametric studies are carried-out on various configurations of a hollow monopile by varying water depths and properties of sand. A nonlinear static analysis of substructure is performed considering aerodynamic forces and hydrodynamic forces for various structural and soil parameters. The sub-structure design of wind turbine is based on API （American petroleum institute） standards. A simplified design methodology for monopile support structure under extreme loading condition is presented based on multivariable linear regression analysis. The input variables for the regression analysis are hydrodynamic data, angle of internal friction of sand, and the output variables are length and outer diameter of monopile. This simplified methodology is applicable in pre-studies of wind power parks.

摘要：Based on the Latin square design of statistics, the thickness of first boundary layer, the turbulence model and the cell number were taken as the three main factors of uncertainty in CFD （computational fluid dynamics）. Total resistance of hull was calculated and the flow field around the hull was simulated by CFD method. Then, the influence of uncertainty factors on the hull resistance was discussed by regression analysis with trimmed mesh and overset mesh. Through a series of calculation and analysis, the optimal calculation method was put forward, and the relevant parameters of the calculation were determined. Thirdly, the total resistance of different speed was calculated by using these two kinds of grids, which were in good agreement with the experimental results. Finally, according to the ITTC recommended procedures, uncertainty analysis in CFD was carried out with the numerical results of the total resistance by three sets of grids with uniform refinement ratio rG = √2. Then the modified resistance was compared with the experimental result, which improved the accuracy of the resistance prediction.

摘要：This paper describes the characteristics of liquefied natural gas （LNG） carriers briefly. The LNG carrier includes power plant selection, vapor treatment, liquid cargo tank type, etc. Two parameters fuel substitution rate and recovery of boil of gas （BOG） volume to energy efficiency design index （EEDI） formula are added, and EEDI formula of LNG carriers is established based on ship EEDI formula. Then, based on steam turbine propulsion device of LNG carriers, mathematical models of LNG carriers＇ reference line value are established in this paper. By verification, the EEDI formula of LNG carriers described in this paper can provide a reference for LNG carrier EEDI calculation and green shipbuilding.

摘要：[Objective] To provide scientific guidance for corn production in Suijiang County of Yunnan Province, explore the best recommended fertilization of corn, and provide a scientific basis for formulating the formula fertilization of corn in Suijiang County. [Method] Through carrying out ＂3414＂ corn field fertilizer efficiency experiment in Suijiang County, with the help of ＂3414＂ field experiment design and data analysis management system＂ software, the ternary quadratic and one-variable quadratic fertilizer efficiency equations on corn yield were analyzed. [Result] The optimum fertilization scheme for corn in the region was as follows： when pure N, pure P2O5 and K2O were respectively 244.38, 58.75 and 107.38 kg/hm^2, the the obtained best yield of corn was 6 975.60 kg/hm^2, and the maximum benefit was 16 888.58RMB/hm^2. [Conclusion] The reasonable formula of N, P and K fertilizers can not only improve the yield of corn, but also increase economic benefit, having certain reference significance to the development of formula fertilization of corn in Suijiang County.