摘要：A model of the solution space for all the sensor mechanisms based on the Stewart platform is established, which is a novel and useful tool for investigation of the optimal sensor design. A kind of performance evaluation atlases are plotted within the model of the solution space, which clearly show relationships between the condition number of Jacobjan matrix and parameters of all the sensor mechanisms. By using the performance atlases, an optimal design for the sensor mechanism can be achieved. Because the elastic joints are proposed for replacing the spherical joints, the Stewart platform based sensor can be designed as small as possible.

摘要：This paper reviews recent advances in radar sensor design for low-power healthcare,indoor real-time positioning and other applications of *** radar front-end architectures and digital processing methods are proposed to improve the detection performance including detection accuracy,detection range and power *** many of the reported designs were prototypes for concept verification,several integrated radar systems have been demonstrated with reliable measured results with demo systems.A performance comparison of latest radar chip designs has been provided to show their features of different *** great development of IoT,short-range low-power radar sensors for healthcare and indoor positioning applications will attract more and more research interests in the near future.

摘要：The working state of drilling bit is a critical issue in the drilling process. The preliminary design of pressure and torque separation sensor for drilling bit is expatiated herein. The sensor unit is composed of the elastic unit and the Wheatstone full bridge. Under composited load, the theoretical analysis about separating the axial force and torque of drilling bit is discussed firstly. The separation has been achieved by using the Wheatstone full bridge pasted onto the elastic unit. Then the transversal and axial strains distribution of elastic unit has been calculated and analyzed by ANSYS software, when the bit is under axial force and torque. Based on the calculation and analysis results, the sensitivity and accuracy of the sensor's whole measurement chain can be reckoned. Meanwhile, the calculation and analysis results can also give good suggestion about the positions where the strains gauge should be pasted. Finally, it has been proved that this solution can meet the preset requirements very well.

摘要：An idea of the surface plasmon resonance(SPR)has been utilized for the design of highly sensitive sensors based on the wagon-wheel fiber *** sensors are sensitive to changes in the refractive index of sample *** this study,a three-strut wagon-wheel structure,coated with the gold layer of nano-sized thickness,has been proposed as the SPR *** element method is employed to simulate and tune the proposed SPR's design,which leads to a highly sensitive and multichannel plasmonic sensor with the ability for a dual reading on a single analyte or simultaneous identification of two *** this design,suitable thickness values for the gold layer and core struts are *** of the detector due to the first resonance peak, second resonance peak,and the difference in resonance peaks are calculated to be 1120nm/RIU, 1540nm/RIU,and 420nm/RIU,respectively,when analytes are placed in all three channels of the *** of the detector with respect to the second resonant peak for analyte in Channels 2 and 3 is also found to be 1252nm/RIU when Channel 1 is filled with the *** sensitivity and resolution of the sensor increase as the refractive index of the analyte increases by almost a linear *** the sensor is utilized to detect the difference in two peaks,it would substantially reduce the noise,and the best result is *** thicknesses of the struts and the gold layer are proper parameters to be tuned in designing the detector.

摘要：Using fine electromagnetic signals to measure observables of other fields like curvature and torsion of a space, and the corresponding value of their integrals of the action of perception of curvature through electronic signals that detect curvature on a curved surface, it is designed and constructed a sensor of curvature of accelerometer type that detects and curvature measures in 2 and 3-dimensional spaces using the programming of shape operators on spheres and the value of their integrals along the curves and geodesics in their principal directions.

摘要：Several protocols and schemes have been proposed to reduce energy consumption in Wireless sensor Net-works (WSNs). In this paper we employ farcoopt, a cross layer design approach with the concept of coop-eration among the nodes with best farthest neighbor scheme to increase the Quality of Service (QoS), reduce energy consumption, increases performance and end-to-end throughput. We present cooperative transmission to connect previously disconnect parts of a network thus overcoming the separation problem of multi-hop network. We show that this approach improves connectivity over 50% compared to multi-hop approaches and reduces the number of nodes necessary to provide full coverage of an area up to 35%. Simulation results show that on increase of data rates i.e. packet the network life time increases in farcoopt as compared to tra-ditional multi hop approach. The result of this analysis is presented in this work.

摘要：In this paper we propose an analyzing of the response of a stress optical fiber sensor of which we proposed several design. We show that an optical fiber sensor with these designs can covenanting allow the measuring the force/stress applied to a mechanical structure or which it is linked, by optimizing the uses of appropriate materials for constituting the sensor support. The experiment that we introduce to validate our approach based in principles includes design with a support bearing a multimode optical fiber organized in such a way that the transmitted light is attenuated when the fiber-bending angle coming from stitching in holes of the support is modified by the effects of the force/stress applied to the optical fiber sensor realized in this way. The tests realized concern the most relevant parameters that define the performances of the stress sensor that we propose. We present the problems that we to solved for the optimization of the sensor for selecting the more efficient material for the optical fiber sensor support related to a relevant choice of optical fibers.

摘要：In order to realize the micromation of position sensors, and extend the application area into micro scale, this paper designs a novel micro position sensor, Mace SAW (Surface Acoustic Wave) position sensor, which can be fabricated with MEMS technology. Its key components are IDTs (Interdigital Transducers) and reflective grooves. The structure and working principles of the sensor are introduced theoretically, and the manufacture process is then put forward.

摘要：Designing low power sensor networks has been the general goal of design engineers, scientist and end users. It is desired to have a wireless sensor network (WSN) that will run on little power (if possible, none at all) thereby saving cost, and the inconveniences of having to replace batteries in some difficult to access areas of usage. Previous researches on WSN energy models have focused less on the aggregate transceiver energy consumption models as compared to studies on other components of the node, hence a large portion of energy in a WSN still get depleted through data transmission. By studying the energy consumption map of the transceiver of a WSN node in different states and within state transitions, we propose in this paper the energy consumption model of the transceiver unit of a typical sensor node and the transceiver design parameters that significantly influences this energy consumption. The contribution of this paper is an innovative energy consumption model based on simple finite automata which reveals the relationship between the aggregate energy consumption and important power parameters that characterize the energy consumption map of the transceiver in a WSN;an ideal tool to design low power WSN.

摘要：This paper deals with the design of an intelligent access control system based on the fingerprint sensor FPC- 1011C. The design uses the S3C2410 and TMS320VC5510A as the system processor. A fingerprint acquisition module and a wireless alarm module were designed by using the fingerprint sensor FPC1011C and GPRS module SIM100 respectively. The whole system was implemented wireless alarm through messages and GPRS-Internet in the GSM/GPRS web. In order to achieve the simple and high Real-time system, the μC-Linux system migration was also implemented.