摘要：A novel CAD method for tooth profile based on the gearing feature has been proposed in this paper, and this method could be applied to the variable transmission ratio and three-dimension situation. The two pitch curves of the two gears can be generated due to the given transmission ratio. The tooth profile curves are formed in each coordinate system of its pitch curve by the gearing process. Finally, the tooth profile could be extracted and translated into a real dimension by CAD method. It is provided a simply thought for tooth profile design to avoid so much complicated mathematical reasoning.

摘要：Shock control bumps are a promising technique in reducing wave drag of civil transport aircraft flying at transonic *** paper investigates the optimization of 3D shock control bumps on a supercritical wing with a sweep angle of 16°at the1/4 chord.A similar supercritical wing with a higher sweep angle of 24.5°at the 1/4 chord has been adopted as a baseline for the *** results show that the drag coefficient of the low sweep wing with the optimized 3D shock control bumps is reduced below that for the high sweep wing,indicating shock control bumps can be used as an effective means to reduce the wave drag caused by reducing the wing sweep *** the point of view of the wing structure design,lower sweep angle will also bring the benefits of weight reduction,resulting in further fuel reduction.

摘要：The data topology structure of uniform experiment design (UD) is too complex to be reasonable regressed. In this paper, the principle and method of distinguish the training data and testing data were described to make a reasonable regression when uniform experiment design combined with support vector regression (SVR). Two equivalent ways which were the smallest enclosing hypersphere perceptron (SEH) and the enclosing simplex perceptron (ES) were provided to discover the topology relationship of the process parameter datum. To give an application, a series of experiments about laser cladding layer quality were conducted by UD to get the relationship of load, velocity and wearing capacity. Results showed that only the testing datum recommended by the two perceptrons got a good forecasting by SVR. Therefore, the two perceptrons could guide experiments with process parameter data of complex topology structure. Further, the application could be extended over a much wider field of experiments.

摘要：The robot consists of a quadruped mechanism and two active dual-wheel casters possesses the advantages of wheeled and legged mechanism, and can quickly move on the relatively plane ground with the wheeled mechanism, and can walk on the extremely uneven terrain with the legged mechanism. The effectiveness of the motion design of the hybrid robot is iHustrated by simulation results.

摘要：The effects of Sn content on microstructure and tensile properties of as-cast and as-extruded Mg-8Li-3Al-(1,2,3)Sn(wt.%)alloys were investigated by X-ray diffractometry(XRD),optical microscopy(OM),scanning electron microscopy(SEM)and tensile *** is found that,as-cast Mg-8Li-3Al-(1,2,3)Sn alloys consist ofα-Mg+β-Li duplex matrix,MgLiAl2 and Li2Mg Sn *** Sn content leads to grain refinement ofα-Mg dendrites and increase in content of Li2MgSn *** hot extrusion,complete dynamic recrystallization(DRX)takes place inβ-Li phase while incomplete DRX takes place inα-Mg *** Sn content is increased,the volume fraction of DRXedα-Mg grains is increased and the average grain size of DRXedα-Mg grains is *** Sn content is beneficial to strength but harmful to ductility for as-cast Mg-8Li-3Al-(1,2,3)Sn *** properties of Mg-8Li-3Al-(1,2,3)Sn alloys are improved significantly via hot extrusion and Mg-8Li-3Al-2Sn alloy exhibits the best tensile properties.

摘要：The sliding-rolling mixed motion behavior degrades the ball screw’s precision at different *** on the sliding-rolling mixed motion between ball and screw/nut raceway,the ball screw’s precision loss considering different given axial loading and rotational speed working conditions was *** creep and lubrication relate to sliding and rolling motion wear,the creep and lubrication characteristics are analyzed under different working ***,the precision loss was calculated considering the sole influence of sliding behavior between ball and screw and compared with the results from other current ***,research on precision loss owing to the sliding-rolling mixed motion behavior was realized under given working conditions,and suitable wear tests were carried *** analytical results of precision loss are in good agreement with the experimental test conclusions,which is conducive to better predicting the law of precision loss in stable wear period.

摘要：Two kinds of semi-solid samples of AZ80−0.2Y−0.15Ca(wt.%)(AZ80M)magnesium alloy were prepared by semi-solid isothermal heat treatment of materials with and without equal channel angular pressing(ECAP)*** microstructures of initial and semi-solid treated samples were compared and *** results showed a significant difference in the liquid phase distribution between three-pass ECAP processed(3P)and as-received samples during the isothermal heating *** semi-solid 3P sample showed a more uniform liquid distribution due to its smaller dihedral ***,the coarsening processes of solid grains of as-received and 3P samples were dominated by the coalescence and Ostwald ripening mechanism,*** difference of coarsening processes was mainly related to the proportion of the high-angle grain boundaries in materials,which further affected the evolution behavior of the liquid pools.

摘要：3D elastic-plastic FE model for simulating the force controlled stretch-bending process of double-cavity aluminum profile was established using hybrid explicit−implicit solvent *** the computational accuracy and efficiency,the optimal choices of numerical parameters and algorithms in FE modelling were *** formation mechanisms of cross-section distortion and springback were *** effects of pre-stretching,post-stretching,friction,and the addition of internal fillers on forming quality were *** results show that the stress state of profile in stretch-bending is uniaxial with only a circumferential *** stress distribution along the length direction of profile is non-uniform and the maximum tensile stress is located at a certain distance away from the center of *** aluminum profile is gradually attached to bending die,the distribution characteristic of cross-section distortion along the length direction of profile changes from V-shape to *** unloading the forming tools,cross-section distortion decreases obviously due to the stress relaxation,with a maximum distortion difference of 13%before and after *** pre-stretching and post-stretching forces increase,cross-section distortion increases gradually,while springback first decreases and then remains *** increasing friction between bending die and profile,cross-section distortion slightly decreases,while springback ***-section distortion decreases by 83%with adding PVC fillers into the cavities of profile,while springback increases by 192.2%.

摘要：Four organic smallmolecule hole transport materials(D41, D42,D43 and D44) of tetraarylpyrrolo[3,2-b]pyrroles were prepared. They can be used without doping in the manufacture of the inverted planar perovskite solar cells. Tetraarylpyrrolo[3,2-b]pyrroles are accessible for one-pot synthesis.D42, D43 and D44 possess acceptor-π-donor-π-acceptor structure, on which the aryl bearing substitutes of cyan, fluorine and trifluoromethyl, respectively. Instead, the aryl moiety of D41 is in presence of methyl with a donor-π-donor-π-donor structure. The different substitutes significantly affected their molecular surface charge distribution and thin-film morphology, attributing to the electron-rich properties of fused pyrrole ring. The size of perovskite crystalline growth particles is affected by different molecular structures,and the electron-withdrawing cyan group of D42 is most conducive to the formation of large perovskite grains. The D42 fabricated devices with power conversion efficiency of17.3% and retained 55% of the initial photoelectric conversion efficiency after 22 days in dark condition. The pyrrolo[3,2-b]pyrrole is efficient electron-donating moiety for hole transporting materials to form good substrate in producing perovskite thin film.

摘要：The zirconium(Zr)alloy fuel cladding is one of the key structural components of a nuclear reactor and the first and most important line of defense for accommodating fission *** the operation of nuclear reactors,Zr alloy fuel cladding is subjected to extreme harsh environments,such as high temperature,high pressure and high flow rate for a long period of *** wear and corrosion resistance of Zr alloys is important for the safe operation of nuclear *** modification can effectively improve the corrosion and wear resistance of fuel *** with coating technology,nitriding technology does not have problems for bonding between the coating and the *** research on surface nitriding of Zr alloys mainly focuses on plasma nitriding and ion implantation *** on laser nitriding of Zr alloy surfaces and their fretting wear characteristics is *** this study,the surface of Zr alloy was treated with laser nitriding at different laser *** microstructure of Zr alloy treated with different laser energies and its fretting wear performance were *** results showed that after nitriding with different laser energies,the surface of the Zr alloy showed a typical molten state after melting,vaporizing and cooling under the thermal effect of the laser,and this state was more obvious with the increase of the laser *** the same time,doping of N atoms and formation of the ZrN phase led to different cooling rates in the molten zone that produced large tensile stresses after *** led to cracks on the surface of Zr alloys after laser nitriding at different energies,and the crack density increased with increasing laser *** also led to an increase in the surface roughness of the Zr alloy with increasing laser energy after laser nitriding *** to the presence of water in the industrial nitrogen,nitrides were generated on the surface of the sample along with some *** the laser