摘要：An intelligent response surface methodology (IRSM) was proposed to achieve the most competitive metal forming products, in which artificial intelligence technologies are introduced into the optimization process. It is used as simple and inexpensive replacement for computationally expensive simulation model. In IRSM, the optimal design space can be reduced greatly without any prior information about function distribution. Also, by identifying the approximation error region, new design points can be supplemented correspondingly to improve the response surface model effectively. The procedure is iterated until the accuracy reaches the desired threshold value. Thus, the global optimization can be performed based on this substitute model. Finally, we present an optimization design example about roll forming of a "U" channel product.

摘要：The paper presents a promised way of feature recognition from 2D engineering drawing——developing special system and extracting features from machining drawings. In general, researchers inclined to extract features from design drawings and ignored machining drawings. Actually, both of machining and design information shows the same importance in developing new products. Not only can machining drawing provide us with feature model or 3D geometrical model of the part, but also they can be easily recognized. In the paper the processes and methods of feature recognition from three-cone-bit (A Kind of aiguilles used to drill oil well) machining drawings are introduced. Firstly, overall approach is explained. Secondly, two methods of form feature recognition are introduced: symbol-matching method used to analyze annularity or chained graph and method based on feature-hint used to recognize the general features. Thirdly, feature parameters are extracted. Finally, a practical implementation is given.

摘要：The inverse heat conduction method is one of methods to identify the casting simu- lation parameters. A new inverse method was presented according to the Tikhonov regularization theory. One appropriate regularized functional was established, and the functional was solved by the sensitivity coeffcient and Newton-Raphson iteration method. Moreover, the orthogonal experimental design was used to estimate the ap- propriate initial value and variation domain of each variable to decrease the number of iteration and improve the identification accuracy and effciency. It illustrated a detailed case of AlSi7Mg sand mold casting and the temperature measurement ex- periment was done. The physical properties of sand mold and the interfacial heat transfer coeffcient were identified at the meantime. The results indicated that the new regularization method was effcient in overcoming the ill-posedness of the inverse heat conduction problem and improving the stability and accuracy of the solutions.

摘要：This paper introduces a type of out-of-plane microelectrothermal actuator, which is based on the principle of bimetal film thermal expansion in the fuse. A polymer SU-8 material and nickel are used as the functional and structural materials of the actuator. Through heating the resistance wire using electricity, the actuator produces out-of-plane motion in the perpendicular axial direction of the device and the bias layer contact with the substrate, completing signal output. Using Coventorware software to establish the three-dimensional model, the geometric structure is optimized and the electrothermal capabilities are determined theoretically. From electrothermal ana- lysis, the actuator＇s displacement is 18 #m and the temperature rises from 300 to 440 K under a voltage of 5 V and the response time is 5 ms. The actuator＇s displacement is 20μm under a 100000 m/s2 acceleration in the accelerating field. In the coupled field, applying a 3 V voltage, the initial temperature is 300 K, while the acceleration is 50000 m/s2, the driving displacement of the actuator is 23μm, and temperature rises to 400 K. Finally, through checking the stress in different field sources, the maximum stress of the actuator is smaller than the allowable stress of nickel. The results show that the electrothermal actuator has high reliability.

摘要：The theory of grey systems is a new technique for performing prediction, relational analysis and decision making in many areas. In this paper, the use of grey relational analysis for optimizing the square hole flanging process parameters with considerations of the multiple response (the average flanging height, regular flanging and maximum strain) is introduced. Various flanging parameters, such as the blank inner radius rb, blank inner width B0, are considered. An orthogonal array is used for the experimental design. Multiple response values are obtained using finite element analysis (FEA). Optimal process parameters are determined by the grey relational grade obtained from the grey relational analysis for multi-performance characteristics (flanging height, regular flanging and maximum strain). Analysis of variance (ANOVA) for the grey relational grade is implemented. The results showed good agreement with the experiment result. Grey relational analysis can be applied in multiple response optimi-zation designs.

摘要：The theory of grey systems is a new technique for performing prediction, relational analysis and decision making in many areas. The grey relational analysis was used to optimize the deep-drawing process parameters with considerations of the multiple response (the wrinkle, crack and thinning variation). The deep-drawing parameters, such as the blank holding force (F_ bh ), the radii of punch and die (R_1,R_2), the coefficients of friction (μ_1,μ_2,μ_3) are considered. An orthogonal array is used for the experimental design. The multiple response values are obtained making use of finite element analysis (FEA). Optimal process parameters are determined by the grey relational grade obtained from the grey relational analysis for multi-performance characteristics (the wrinkle, crack and the thinning). The analysis of variance (ANOVA) for the grey relational grade is implemented. The results show that the quality of stamped parts can be improved effectively through the new approach. The grey relational analysis can be applied in sheet metal forming.

摘要：Uncertainties in engineering design may lead to low reliable solutions that also exhibit high sensitivity to uncontrollable variations. In addition, there often exist several conflicting objectives and constraints in various design environments. In order to obtain solutions that are not only "multi-objectively" optimal, but also reliable and robust, a probabilistic optimization method was presented by integrating six sigma philosophy and multi-objective genetic algorithm. With this method, multi-objective genetic algorithm was adopted to obtain the global Pareto solutions, and six sigma method was used to improve the reliability and robustness of those optimal solutions. Two engineering design problems were provided as examples to illustrate the proposed method.

摘要：研究目的:性能估计已成为异构MPSo C设计中一个非常重要且具有挑战性的任务。在设计早期进行准确快速估计性能对于设计空间探索十分必要。本文采用GCC剖析技术和代码标注技术,结合MPSo C分层抽象概念,探讨逐层次完善的性能评估技术在MPSo C体系结构探索中的应用。创新要点:为面向多媒体应用的MPSo C性能估计提出一个从VA层到TA层的剖析和标注相结合流程,使性能估计可以被有效逐层完善。研究方法:基于GNU gcov工具,在本机模拟过程中剖析给定应用程序代码执行的统计信息,并且支持实时性能分析,快速、准确估计VA模型的计算负载。基于VA模型得到的计算负载性能的结果标注,利用TA模型的System C时序精确级仿真得到通信延时结果,使TA模型性能估计更高效,完善整个MPSo C性能估计。重要结论:研究一个剖析和标注技术相结合的MPSo C性能评估方法和流程。在VA层得到准确计算负载性能并标注给TA层;在TA层利用基于标注的仿真方法完善通信延时,使得性能估计更高效。通过M-JPEG和MEPG2两个典型视频多媒体应用实验,展示本文方法的高效、快速与准确。

摘要：Methods used for digital ship design were studied and formed the basis of a proposed frame model suitable for ship construction modeling. Based on 3-D modeling software, a digital design system for hull structures was developed. Basic software systems for modeling, modifying, and assembly simulation were developed. The system has good compatibility, and models created by it can be saved in different 3-D file formats, and 2D engineering drawings can be output directly. The model can be modified dynamically, overcoming the necessity of repeated modifications during hull structural design. Through operations such as model construction, intervention inspection, and collision detection, problems can be identified and modified during the hull structural design stage. Technologies for centralized control of the system, database management, and 3-D digital design are integrated into this digital model in the preliminary design stage of shipbuilding.

摘要：3D solid models for parts with regular-form surfaces (PRFSs) are effectively generated using traditional parametric design techniques. A new model is obtained by changing some parameters defining the model. The parts with free-form surfaces (PFFSs), however, cannot be defined by several parameters. Usually they are defined by some geometric elements like profile curves. The traditional parametric design approaches have not easily dealt with the PFFSs. A method for generating a solid model and an engineering drawing for PFFSs is proposed in this paper: First, the new profiles are generated from input point data. Second, the profile information is extracted from the existing model. Last, the old profiles are replaced with the new profiles. This method can preserve the associative information of the existing model and automatically generate the drawing including views, dimen- sions, and annotations. The proposed method has been implemented using a commercial cad/CAM system, Unigraphics, and API functions written in C-language, and were applied to the blades of a turbine generator. Some illustrative examples are pro- vided in order to show the effectiveness of the proposed method.