摘要：Short-range ordering(SRO)is one of the most important structural features of high entropy alloys(HEAs).However,the chemical and structural analyses of SROs are very difficult due to their small size,complexed compositions,and varied *** electron microscopy(TEM)as well as its aberration correction techniques are powerful for characterizing SROs in these compositionally complex *** this short communication,we summarized recent progresses regarding characterization of SROs using TEM in the field of *** using advanced TEM techniques,not only the existence of SROs was confirmed,but also the effect of SROs on the deformation mechanism was ***,the perspective related to application of TEM techniques in HEAs are also discussed.

摘要：An electronic speckle shearing phase-shifting pattern interferometer (ESSPPI) based on Michelson interferometer was based in this paper. A rotatable mirror driven by a step motor in one of its reflective arm is used to generate an adjustable shearing and the mirror driven by piezoelectric transducer (PZT) in the other reflective arm was used to realize phase- shifting. In the experiments, the deformation of an aluminum plate with the same extern-force on different positions and different forces on the same position is measured. Meanwhile, the phase distribution and phase-unwrap image of the aluminum plate with the extern-force on its center position is obtained by the four-step phase-shifting method.

摘要：Nonreciprocity of thermal metamaterials has significant application prospects in isolation protection,unidirectional transmission,and energy ***,due to the inherent isotropic diffusion law of heat flow,it is extremely difficult to achieve nonreciprocity of heat *** review presents the recent developments in thermal nonreciprocity and explores the fundamental theories,which underpin the design of nonreciprocal thermal metamaterials,i.e.,the Onsager reciprocity ***,three methods for achieving nonreciprocal metamaterials in the thermal field are elucidated,namely,nonlinearity,spatiotemporal modulation,and angular momentum bias,and the applications of nonreciprocal thermal metamaterials are *** also discuss nonreciprocal thermal ***,the potential applications of nonreciprocity to other Laplacian physical fields are ***,the prospects for advancing nonreciprocal thermal metamaterials are highlighted,including developments in device design and manufacturing techniques and machine learning-assisted material design.

摘要：The reduction of water resources and soil fertility in Northeast china will have a requirement on higher working efficiency of agricultural soil-engaging *** adhesion and resistance are main problems for soil-engaging tillage ***,the soil-burrowing or soil-digging animals give inspirations to resolve those *** fair,claw,toe,textured surface and scales have functions of anti-adhesion or resistance *** results provide a way to realize the sustainable development of modern agriculture by developing novel biomimetic agricultural machinery systems with independent intellectual property rights to meet conservation tillage requirements in the Northern china *** structures of some soil-burrowing or soil-digging animals,such as beetle,mole cricket,earthworm,mole,vole,pangolin,and snake,as well as their mechanisms of anti-adhesion or reducing resistance were reviewed in this *** applications in Northeast china were also presented in the paper,including moldboard,subsoiler components,furrow opener,roller,and biomimetic rototilling-stubble-breaking *** addition,the existed problems in agricultural engineering and the future development trends were discussed.

摘要：Wave climate plays an important role in the air-sea interaction over marginal seas. Extreme wave height provides fundamental information for various ocean engineering practices, such as hazard mitigation, coastal structure design, and risk assessment. In this paper, we implement a third generation wave model and conduct a high-resolution wave hindcast over the East china Sea to reconstruct a 15-year wave field from 1988 to 2002 for derivation of monthly mean wave parameters and analysis of extreme wave conditions. The numerical results of the wave field are validated through comparison with satellite altimetry measurements, low-resolution reanalysis, and the ocean wave buoy record. The monthly averaged wave height and wave period show seasonal variation and refined spatial patterns of surface waves in the East china Sea. The climatological significant wave height and mean wave period decrease from the open ocean in the southeast toward the continental area in the northwest, with the pattern generally following the bathymetry. Extreme analysis on the significant wave height at the buoy station indicates the hindcast data underestimate the extreme values relative to the observations. The spatial pattern of extreme wave height shows single peak emerges at the southwest of Ryukyu Island although a wind forcing with multi-core structure at the extreme is applied.

摘要：Backfill mining is one of the most important technical means for controlling strata movement and reducing surface subsidence and environmental damage during exploitation of underground coal resources. Ensuring the stability of the backfill bodies is the primary prerequisite for maintaining the safety of the backfilling working face, and the loading characteristics of backfill are closely related to the deformation and subsidence of the roof. Elastic thin plate model was used to explore the non-uniform subsidence law of the roof, and then the non-uniform distribution characteristics of backfill bodies’ load were revealed. Through a self-developed non-uniform loading device combined with acoustic emission (AE) and digital image correlation (DIC) monitoring technology, the synergistic dynamic evolution law of the bearing capacity, apparent crack, and internal fracture of cemented coal gangue backfills (CCGBs) under loads with different degrees of non-uniformity was deeply explored. The results showed that: 1) The uniaxial compressive strength (UCS) of CCGB increased and then decreased with an increase in the degree of non-uniformity of load (DNL). About 40% of DNL was the inflection point of DNL-UCS curve and when DNL exceeded 40%, the strength decreased in a cliff-like manner; 2) A positive correlation was observed between the AE ringing count and UCS during the loading process of the specimen, which was manifested by a higher AE ringing count of the high-strength specimen. 3) Shear cracks gradually increased and failure mode of specimens gradually changed from “X” type dominated by tension cracks to inverted “Y” type dominated by shear cracks with an increase in DNL, and the crack opening displacement at the peak stress decreased and then increased. The crack opening displacement at 40% of the DNL was the smallest. This was consistent with the judgment of crack size based on the AE b-value, i.e., it showed the typical characteristics of “small b-value-large crack and

摘要：Bacterial infection is a major problem following bone implant ***,poly-l-lactic acid/carbon nanotube/hydroxyapatite(PLLA/CNT/HAP)bone scaffolds possess enhanced mechanical properties and show good ***,wesynthesizedsilver(Ag)-dopedCNT/HAP(CNT/Ag-HAP)nanohybrids via the partial replacing of calcium ions(Ca2+)in the HAP lattice with silver ions(Ag+)using an ion doping technique under hydrothermal ***fically,the doping process was induced using the special lattice structure of HAP and the abundant surface oxygenic functional groups of CNT,and involved the partial replacement of Ca2+in the HAP lattice by doped Ag+as well as the in situ synthesis of Ag-HAP nanoparticles on CNT in a hydrothermal *** result-ing CNT/Ag-HAP nanohybrids were then introduced into a PLLA matrix via laser-based powder bed fusion(PBF-LB)to fabricate PLLA/CNT/Ag-HAP scaffolds that showed sustained antibacterial *** then found that Ag+,which pos-sesses broad-spectrum antibacterial activity,endowed PLLA/CNT/Ag-HAP scaffolds with this activity,with an antibacterial effectiveness of 92.65%.This antibacterial effect is due to the powerful effect of Ag+against bacterial structure and genetic material,as well as the physical destruction of bacterial structures due to the sharp edge structure of *** addition,the scaffold possessed enhanced mechanical properties,showing tensile and compressive strengths of 8.49 MPa and 19.72 MPa,***,the scaffold also exhibited good bioactivity and cytocompatibility,including the ability to form apatite layers and to promote the adhesion and proliferation of human osteoblast-like cells(MG63 cells).

摘要：A combination of hydrogels and microfluidics allows the construction of biomimetic three-dimensional(3D)tissue models in vitro,which are also known as *** hydrogel patterningwith awell-controlled spatial distribution is typically achieved by embedding sophisticated microstructures to act as a ***,these physical barriers inevitably expose cells/tissues to a less physiologically relevant microenvironment than in vivo ***,we present a novel dissolvable temporary barrier(DTB)strategy that allows robust and flexible hydrogel patterning with great freedom of design and desirable flow stimuli for cellular *** key aspect of this approach is the patterning of a water-soluble rigid barrier as a guiding path for the hydrogel using stencil printing technology,followed by a barrier-free medium perfusion after the dissolution of the *** and multiple tissue compartments with different geometries can be established using either straight or curved DTB *** effectiveness of this strategy is further validated by generating a 3D vascular network through vasculogenesis and angiogenesis using a vascularized microtumor *** a new proof-of-concept in vasculature-on-a-chip,DTB enables seamless contact between the hydrogel and the culture medium in closed microdevices,which is an improved protocol for the fabrication ofmultiorgan ***,we expect it to serve as a promising paradigm for organ-on-a-chip devices for the development of tumor vascularization and drug evaluation in the future preclinical studies.

摘要：Conventional blood sampling for glucose detection is prone to cause pain and fails to continuously record glucose fluctuations in *** glucose monitoring based on implantable electrodes could induce pain and potential tissue inflammation,and the presence of reactive oxygen species(ROS)due to inflammationmay affect glucose *** technology is less invasive,yet microneedle adhesion with skin tissue is *** this work,we developed a microarrow sensor array(MASA),which provided enhanced skin surface adhesion and enabled simultaneous detection of glucose and H_(2)O_(2)(representative of ROS)in interstitial fluid in *** microarrows fabricated via laser micromachining were modified with functional coating and integrated into a patch of a three-dimensional(3D)microneedle *** to the arrow tip mechanically interlocking with the tissue,the microarrow array could better adhere to the skin surface after penetration into *** MASA was demonstrated to provide continuous in vivo monitoring of glucose and H_(2)O_(2) concentrations,with the detection of H_(2)O_(2) providing a valuable reference for assessing the inflammation ***,the MASA was integrated into a monitoring system using custom *** work provides a promising tool for the stable and reliable monitoring of blood glucose in diabetic patients.

摘要：经典克拉尼图形(Chladni patterns,CP)是特征向量的视觉表示,在振动分析、乐器设计、粒子操纵和分离等领域中具有广泛的应用.均质结构通常会表现出高度规则化的CP,这限制它们的应用场景.因此,实现面向应用来逆向设计结构的CP是非常重要的,而这可以通过使用拓扑优化来实现CP的逆向设计.本研究提出了一种使用基于密度的拓扑优化算法来设计结构CP的方法.优化列式中,给出了描述图形的指标函数,并以最小化特征向量和目标CP之间的误差构建了优化目标.数值结果表明,所提出的方法可以为指定的单阶或多阶CP生成新颖的材料分布.这表明了本文所提出的方法能够实现CP的精确定制设计,进一步为面向应用的需求提供了更多选择.