摘要：This work is about the development of a super low noise amplifier with minimum power consumption and high gain for several wireless *** amplifier operates at frequency bands of 0.9-2.4 GHz and can be used in many applications like Wireless local area network(WLAN),WiFi,Bluetooth,ZigBee and Global System for mobile communications(GSM).This new design can be employed for the IEEE 802.15.4 standard in industrial,scientific and medical(ISM) *** enhancement mode pseudomorphic high electron mobility transistor PHEMT is used here due to its high linearity,better performance and less noisy *** common source inductive degeneration method is employed here to enhance the gain of *** amplifier produces a gain of more than 17 dB and noise figure of about 0.5 *** lower values of S11 and S22 reflect the accuracy of impedance matching network placed at the input and output sides of *** Advance Design System(ADS) is used for the design and simulation *** the layout of design is developed on the FR4 substrate.

摘要：为折射索引和极小的排水量的测量的新光基于紧张的察觉到机制在这篇论文被建议，它基于修改在二个平行长时期的纤维栅栏之间联合的光的数量。有实验和模拟结果的这察觉到的机制的特征被表明。

摘要：Compact,hot-pluggable,and data-agnostic,SFP modules bring up to 4.25 Gbps to a flexible new form *** SFP transceiver which is the core device of optical communication is always the research focus in the field of optical communication for both telecommunication and data communication *** working principles of SFP including the transmitter components,the receiver components and the microcontroller are discussed in *** basic theory of high-speed signal and the concept of high-speed circuit,high-speed board design techniques are presented.A new design of high performance,cost effective SFP transceiver and PCB layout are also *** performance of the transceiver is analyzed and the characteristics of the sample are coincident with the expected *** status of the transceiver can be monitored and controlled by I2C bus through the interface in real *** transceiver can meet the requirement of SFF-8472.

摘要：The DC-DC converters are widely used in photovoltaic generating systems as an interface between PV module and the load. These converters must be chosen to be able to match the maximum power point (MPP) of PV module when climatic conditions change with different resistive load values. So DC-DC converters must be used with MPPT controller in order to reduce losses in the global PV system. This article focuses on the effect of climatic conditions on design of two components (inductance, capacitance) for three topologies of DC-DC converters commonly used in PV systems. When climatic conditions change, the boundary of inductance and capacitance parameters of DC-DC converter will change. These two parameters must be properly sized to achieve optimal efficiency for each converter. The design optimization is based on two principles: 1) for a steady-state operation in a continuous conduction mode, the inductance value for all choppers must be greater than the maximum value of boundary inductance, and 2) in order to limit the output voltage ripple of DC-DC converter below a desired value, the filter capacitance must be larger than the maximum value of boundary capacitance.

摘要：A highway distress and preventive measures decision support system based on WebGIS and J2EE architecture were studied, and the key issues for the system are presented. Such issues as spatial data and attribute data organization, technology of enhancing user experience, database connection pool were investigated. The feasibility of the theories and methods were tested through the system.

摘要：A design of a log periodic SPIFA (spiral planar inverted–F antenna) is proposed. A way of tuning the SPIFA to work in the ISM band (2.45 GHz) is discussed. The purpose of the antenna is to detect any tumor in the liver depending on the change in the conductivity and the permittivity of the liver after being infected. Detecting liver cancer on its early stages will help in the treatment process and makes it much faster as cancer in early stages can be treated easily. The antenna is designed, simulated and measured in a rabbit"s liver. The simulated and measured results show great agreement with each other.