摘要：The thermal conduction of suspended few-layer hexagonal boron nitride （h-BN） sheets was experimentally investigated using a noncontact micro-Raman spectroscopy method. The first-order temperature coefficients for monolayer （1L）, bilayer （2L） and nine-layer （9L） h-BN sheets were measured to be -（3.41 ± 0.12）× 10-2, -（3.15 ± 0.14） × 10-2 and -（3.78 ±0.16）× 10-2 cm-1.K-1, respectively. The room-temperature thermal conductivity of few-layer h-BN sheets was found to be in the range from 227 to 280 W.m-1-K-1, which is comparable to that of bulk h-BN, indicating their potential use as important components to solve heat dissipation problems in thermal management configurations.

摘要：Spin engineering is recognized as a promising strategy that modulates the association between d‐orbital electrons and the oxygenated species,and enhances the catalytic ***,few efforts have been made to clarify whether spin engineering could make a considerable enhancement for electrocatalytic water ***,we report the spin engineering of a nanocage‐structured(Co,Ni)Se_(2)/C@FeOOH,that showed significant oxygen evolution reaction(OER)*** measurement presented that the(Co,Ni)Se_(2)/C@FeOOH sample possesses higher polarization spin number(μb=6.966μB/f.u.)compared with that of the(Co,Ni)Se_(2)/C sample(μb=6.398μB/f.u.),for which the enlarged spin polarization number favors the adsorption and desorption energy of the intermediate oxygenated species,as confirmed by surface valance band ***,the(Co,Ni)Se_(2)/C@FeOOH affords remarkable OER product with a low overpotential of 241 mV at a current of 10 mA cm^(-2) and small Tafel slope of 44 mV dec^(-1) in 1.0 mol/L KOH alkaline solution,significantly surpassing the parent(Co,Ni)Se_(2)/C *** work will trigger a solid step for the design of highly‐efficient OER electrocatalysts.

摘要：The theory of microstrip antennas has motivated us to design a highly improved gain antenna under this category. It is a microstrip monopole antenna characterized by omni-directional radiation as well as a high radiation gain. A review of different methodologies to designing antennas with broad/ultra-wide band performance for various applications is enriched by our original antenna design. This is an original model analyzed over different substrate materials and finally optimized for the bandwidth of (3.3 - 5.8) GHz just below ?10 dB of return loss (RL). The antenna is judged for high gain when the ground plane size is reduced to nearly half that of substrate. The impact of the substrate materials is discussed in this article. The master design tool is Ansoft High Frequency Simulator Structure (HFSS), one of Finite Element Method (FEM) based software tools. The antenna would be printed on a 1.524 mm thick Rogers (RO3003C) substrate;overall size of 33.4 × 33.4 squared millimeters. At the optimal resonance frequency of 3.8 GHz, simulation results perfectly agree with the standards of UWB antennas, with a high radiation gain and impedance matching status.

摘要：In order to solve the problem of parametric test of smart projectile launch,the launch environment of smart projectile was analyzed.a reasonable and feasible storage testing method was proposed,and a multi-channel test system suitable for the environment was *** system was successfully applied to a certain range test,and dynamic parameters such as triaxial acceleration of smart projectile launch environment were *** test results play an important role in the improvements of smart projectile design process.

摘要：电子结构和电导率是析氧反应活性的重要描述符,它们可以通过掺杂来调节.鉴于金属掺杂通常会减少电催化剂的活性位点数量,本工作探究了阴离子掺杂对尖晶石钴酸锌(ZCO)电子结构及其析氧活性的影响.与三价钴为主的ZCO相比,用电负性较低的硫取代氧会提高低自旋态(t_(2g)-^(6)e_(g)^(1))二价钴的占比,其析氧活性要高于低自旋态的三价钴(t_(2g)-^(6)e_(g)^(0)).掺硫钴酸锌(ZCO-S)中钴离子和阴离子之间的电子密度的再分布导致了二价钴的增多,而且钴和硫离子间的强共价作用也会加速电荷迁移.ZCO-S在1.65伏(相对于可逆氢电极)下的比活性比原始ZCO高11倍.相反,掺入具有较高电负性和价态的氟(F)并不能有效地改善电子结构,最终导致材料析氧活性的降低.本工作建立了所掺阴离子的电负性与钴酸锌本征析氧活性之间的联系,并提供了一种通过掺杂不同电负性的阴离子来调控尖晶石氧化物的电子结构的简单有效的方法,这为合理设计高性能尖晶石电催化剂提供了新途径.

摘要：The DC-DC converters are widely used in photovoltaic generating systems as an interface between PV module and the load. These converters must be chosen to be able to match the maximum power point (MPP) of PV module when climatic conditions change with different resistive load values. So DC-DC converters must be used with MPPT controller in order to reduce losses in the global PV system. This article focuses on the effect of climatic conditions on design of two components (inductance, capacitance) for three topologies of DC-DC converters commonly used in PV systems. When climatic conditions change, the boundary of inductance and capacitance parameters of DC-DC converter will change. These two parameters must be properly sized to achieve optimal efficiency for each converter. The design optimization is based on two principles: 1) for a steady-state operation in a continuous conduction mode, the inductance value for all choppers must be greater than the maximum value of boundary inductance, and 2) in order to limit the output voltage ripple of DC-DC converter below a desired value, the filter capacitance must be larger than the maximum value of boundary capacitance.