摘要：A good Ti-based joint implant should prevent stress shielding and achieve good bioactivity and anti-infection *** meet these requirements,the low-elastic-modulus alloy—Ti–35Nb–2Ta–3Zr—was used as the substrate,and functional coatings that contained bioceramics and Ag ions were prepared for coating on TiO_(2)nanotubes(diameter:(80±20)nm and(150±40)nm)using anodization,deposition,and spin-coating *** effects of the bioceramics(nano-β-tricalcium phosphate,microhydroxyapatite(micro-HA),and meso-CaSiO_(3))and Ag nanoparticles(size:(50±20)nm)on the antibacterial activity and the tribocorrosion,corrosion,and early in vitro osteogenic behaviors of the nanotubes were *** tribocorrosion and corrosion results showed that the wear rate and corrosive rate were highly dependent on the features of the nanotube ***-HA showed great wear resistance with a wear rate of(1.26±0.06)×10^(−3)mm^(3)/(N·m)due to adhesive and ***-CaSiO_(3)showed enhanced cell adhesion,proliferation,and alkaline phosphatase *** coatings that contained nano-Ag exhibited good antibacterial activity with an antibacterial rate of≥89.5%against Escherichia *** findings indicate that hybrid coatings may have the potential to accelerate osteogenesis.

摘要：Bismuth‐based photocatalysts are a class of excellent visible‐light photocatalysts;however,their redox activity is relatively poor and the efficiency of photogenerated carrier separation is low,limiting their development and application in the field of *** address these issues,a series of polyoxometalate PW_(12)O_(40)^(3–)‐doped Bi_(2)O_(3–x)/Bi Schottky photocatalysts PW_(12)@Bi_(2)O_(3–x)/Bi‐n(PBOB‐n,where n is the amount of NaBH4,i.e.,6,12,18,24,and 48 mg)were prepared by a simple electrospinning/calcination/in‐situ NaBH4 reduction *** this composite photocatalyst,the doping of PW_(12) could effectively adjust the electronic structure of Bi_(2)O_(3–x) and improve its redox *** a shallow electron trap,PW_(12) promoted the separation of the photogenerated ***,desirable Schottky junction between the metal Bi nanoparticles and PW_(12)@Bi_(2)O_(3–x) further accelerated the separation of the photogenerated *** synergistic effect of the aforementioned factors endowed PBOB‐n with excellent photocatalytic *** the samples,PBOB‐18 exhibited superior photocatalytic *** visible‐light irradiation,93.7%(20 mg catalyst)of 20 ppm tetrabromobisphenol A(TBBPA,20 mL)was degraded in 60 *** activity was 4.4 times higher than that of Bi_(2)O_(3).PBOB‐18 also exhibited an ultrahigh photocatalytic performance for the removal of *** removal rate(600 ppb)reached 83.3%in 30 min,making it one of the most active Bi‐based ***,the photocatalytic mechanisms of PBOB‐18 for TBBPA and NO have been *** work provides a new direction and reference for the design of low‐cost,efficient,stable,and versatile photocatalysts.

摘要：Atomically thin solid-state channels enabling selective molecular transport could potentially be used in a variety of separation and energy conversion *** density of channels,their height,distance and edge structure are the key factors that dramatically impact the selective transport ***,such channels with small constrictions and atomic precision have been limited to proof-ofconcept demonstrations based on microscale two-dimensional(2D)crystal ***,we report the engineering of highly ordered,scalable monolayer graphene crystallite arrays by chemical vapor deposition(CVD)method with a modified anisotropic etching *** size,shape,distance and edge structure of the graphene crystallite arrays in a large area could be delicately controlled through tailoring the synthetic *** array structure can act as pillars to prop up a smooth single-crystal graphene film,and the fabricated integrated angstrom-size(3.4A)channels allow water transport but exclude hydrated ions,demonstrating potential in selective ionic sieving and nanofiltration practice.

摘要：在红外波段模拟章鱼皮肤变色功能的柔性材料在智能热管理、柔性显示和自适应伪装等领域具有广泛的应用前景.本文利用液态金属颗粒和柔性弹性体模拟头足纲变色动物皮肤中的色素细胞和真皮基质,开发了一种通过机械变形调控红外反射/辐射性能的“全柔性红外变色皮肤”.在等轴拉伸作用下,液态金属颗粒会伴随弹性体基体发生延展/收缩变形,从而改变其外形、尺寸和表面形貌,实现对材料红外反射率和发射率的动态调控,以达到动态伪装效果.实验证明,集成了液态金属颗粒/弹性体复合材料的柔性多步态机器人能够在运动过程中迅速改变体色,并且在高次数循环中展现出优异的机械稳定性.本研究为未来设计新型红外发射率动态可调材料与器件提供了材料和物理基础.

摘要：Porous organic polymers(POPs)are an emerging class of porous materials,having many promising applications in a variety of *** them,covalent triazine frameworks(CTFs)featuring conjugated and porous structures can be well applied in *** achieve high optoelectronic performance,usually the design and synthesis of CTFs based on appropriate building blocks is *** we report the synthesis of two fluorescent CTFs based on typical fluorescent building blocks,in which CTF-Py constructed from a pyrene(Py)building block was reported for the first time,showing prospective applications in the sensing of nitroaromatics with high sensitivity,and photocatalytic water splitting and carbon dioxide reduction with high performance in comparison with other porous organic materials.

摘要：Developing efficient platinum(Pt)-based electrocatalysts is enormously significant for fuel ***,we report an integrated electrocatalyst of ultralow-Pt alloy encapsulated into nitrogen-doped nanocarbon architecture for efficient oxygen reduction *** hybrid Pt-based catalyst achieves a mass activity of 3.46 A mg^(-1)_(pt)the potential of 0.9 V *** with a negligible stability decay after 10,000 *** importantly,this half-cell activity can be expressed at full cell level with a high Pt utilization of 10.22 W mg^(-1)_(Pt cathode)and remarkable durability after 30,000 cycles in *** and theoretical investigations reveal that a highly strained Pt structure with an optimal Pt-0 binding energy is induced by the incorporation of Co/Ni into Pt lattice,which would account for the improved reaction *** synergistic catalysis due to nitrogen-doped nanocarbon architecture and active Pt component is responsible for the enhanced catalytic ***,the strong metal-support interaction and optimized hydrophilic properties of nanocarbon matrix facilitate efficient mass transport and water *** work may provide significant insights in designing the low-Pt integrated electrocatalysts for fuel cells and beyond.

摘要：A wearable and high-precision sensor for sound signal acquisition and recognition was fabricated from thin films of specially designed graphene woven fabrics （GWFs）. Upon being stretched, a high density of random cracks appears in the network, which decreases the current pathways, thereby increasing the resistance. Therefore, the film could act as a strain sensor on the human throat in order to measure one＇s speech through muscle movement, regardless of whether or not a sound is produced. The ultra-high sensitivity allows for the realization of rapid and low-frequency speech sampling by extracting the signature characteristics of sound waves. In this study, representative signals of 26 English letters, typical Chinese characters and tones, and even phrases and sentences were tested, revealing obvious and characteristic changes in resistance. Furthermore, resistance changes of the graphene sensor responded perfectly with pre-recorded sounds. By combining artificial intelligence with digital signal processing, we expect that, in the future, this graphene sensor will be able to successfully negotiate complex acoustic systems and large quantities of audio data.

摘要：Nickel(Ni)-based materials act as one of the most promising candidates as platinum-group-metal-free(PGM-free)electrocatalysts for hydrogen oxidation reaction(HOR)in alkaline ***,the electrocatalytic activity of pure Ni is significantly limited due to the sluggish kinetics under alkaline *** accelerate the kinetics,constructing heterostructures and nitride structures have been developed as two representative ***,we combined the two methods and presented a facile synthesis of the sheet-like Ni_(3)N/MoO_(2)in-plane heterostructures for enhanced HOR in alkaline *** to Ni or Ni_(3)N,the Ni_(3)N/MoO_(2)in-plane heterostructures exhibited a significantly increased mass activity by 8.6-fold or 4.4-fold,*** studies revealed that the enhanced activity of Ni_(3)N/MoO_(2)could be attributed to the weakened hydrogen adsorption and strengthened hydroxyl *** work provides a facile approach to design high-efficiency catalysts for hydrogen-oxidation catalysis and beyond.

摘要：As the base of modern electronic industry,field-effect transistor(FET) requires the channel material to have both moderate bandgap and high mobility. The recent progresses indicate that few-layer black phosphorus has suitable bandgap and higher mobility than two-dimensional(2D) MoS_2, but the experimentally achieved maximal mobility(1000 cm^2 V^(-1) s^(-1)) is still obviously lower than those of classical semiconductors(1,400 and 5,400 cm^2 V^(-1) s^(-1) for Si and InP). Here, for the first time, we report on monolayer antimonide phosphorus(SbP) as a promising 2D channel material with suitable direct bandgap, which can satisfy the on/off ratio, and with mobility as high as 10~4 cm^2 V^(-1) s^(-1)based on density functional theory calculation. In particular,α-Sb_(1-x)P_x monolayers possess 0.3–1.6 eV bandgaps when0.1 ≤ x ≤ 1, which are greater than the minimum bandgap(0.4 eV) required for large on/off ratio of FET. Surprisingly,the carrier mobilities of α-Sb_(1-x)P_x monolayers exhibit very high upper limit approaching 2×10~4 cm^2 V^(-1) s^(-1) when 0 ≤x ≤ 0.25 due to the ultra-small effective mass of holes and electrons. This work reveals that 2D SbP with both suitable bandgap and high mobility could be a promising candidate as eco-friendly high-performance FET channel materials avoiding short-channel effect in the post-silicon era, especially when considering the recent experimental success in realizing arsenide phosphorus(AsP) with similar structure.

摘要：铁电材料的力电耦合特性以及在纳米尺度的快速失效导致其剪切过程很难研究,而材料的脆性也限制了这些材料在铁电器件中的潜在应用.在这项工作中,我们使用分子动力学方法模拟了剪切和畴演变的动态过程,揭示了这些畴结构如何影响材料的力电性能.在原子尺度上,一个明显的极化旋涡状的畴结构出现在剪切带的尖端,两侧分别有180°和90°的畴壁.由应变梯度引起的挠曲电效应导致了这些复杂的畴结构.施加外部电场阻碍畴的翻转,并通过减少积累的能量减少了失配应变区域,加速了剪切过程.结果表明极化旋涡畴阻碍了剪切破坏过程,这启示我们可以通过设计畴结构来增韧铁电材料.