摘要：Recently,the increasing interest in wearable technology for personal healthcare and smart virtual/augmented reality applications has led to the development of facile fabrication *** have long been used to develop original solutions to such challenging technological problems due to their remote,sterile,rapid,and site-selective processing of *** this review,recent developments in relevant laser processes are summarized under two separate ***,transformative approaches,such as for laser-induced graphene,are *** addition to design optimization and the alteration of a native substrate,the latest advances under a transformative approach now enable more complex material compositions and multilayer device configurations through the simultaneous transformation of heterogeneous precursors,or the sequential addition of functional layers coupled with other electronic *** addition,the more conventional laser techniques,such as ablation,sintering,and synthesis,can still be used to enhance the functionality of an entire system through the expansion of applicable materials and the adoption of new ***,various wearable device components developed through the corresponding laser processes are discussed,with an emphasis on chemical/physical sensors and energy *** addition,special attention is given to applications that use multiple laser sources or processes,which lay the foundation for the all-laser fabrication of wearable devices.

摘要：The continuous pursuit for a better quality of life promotes continuous advancements in intelligent *** wearable and implantable bioelectronics have emerged as an innovative complement to rigid material-based electronic devices[1-3].Due to their distinct advantages in terms of ductile,ultrathin,and biocompatible features,these elastic and soft bioelectronic devices can be seamlessly mounted onto various real or artificial tissues and organs.

摘要：Three-dimensional(3D)printing has attracted increasing research interest as an emerging manufacturing technology for devel-oping sophisticated and exquisite architecture through hierarchical *** has also been employed in various advanced industrial *** development of intelligent biomedical engineering has raised the requirements for 3D printing,such as flexible manufacturing processes and technologies,biocompatible constituents,and alternative ***,state-of-the-art 3D printing mainly involves inorganics or polymers and generally focuses on traditional industrial fields,thus severely limiting applications demanding biocompatibility and *** this regard,peptide architectonics,which are self-assembled by programmed amino acid sequences that can be flexibly functionalized,have shown promising potential as bioinspired inks for 3D ***,the combination of 3D printing and peptide self-assembly poten-tially opens up an alternative avenue of 3D bioprinting for diverse advanced ***,a small but innovative nation,has significantly contributed to 3D bioprinting in terms of scientific studies,marketization,and peptide architectonics,including modulations and applications,and ranks as a leading area in the 3D bioprinting *** review summarizes the recent progress in 3D bioprinting in Israel,focusing on scientific studies on printable components,soft devices,and tissue *** paper further delves into the manufacture of industrial products,such as artificial meats and bioinspired supramolecular architectures,and the mechanisms,physicochemical properties,and applications of peptide ***,Israel contributes significantly to the field of 3D bioprinting and should thus be appropriately recognized.

摘要：Ideal tissue engineering scaffolds need interconnected pores and high porosity to enable cell survival,migration,proliferation,and ***,obtaining a high-resolution structure is difficult with traditional one-temperature control fused deposition modeling(FDM).In this study,we propose a dual-temperature control method to improve printability.A numerical model is developed in which the viscosity is a function of temperature and shear rate to study the influence of two different temperature control *** tests are used to assess filament formation and shape fidelity,including one-dimensional filament printing,deposition at corners,fusion,and *** using dual-temperature control,the width of the deposited poly(ε-caprolactone)filament is reduced to 50μ*** comparative results of both the experimental method and numerical simulation suggest that the dual-temperature control FDM can manufacture spatially arranged constructs and presents a promising application in tissue engineering。

摘要：Cam-lobe radial-piston hydraulic motors are widely used in large machinery due to their excellent capability to withstand high loading at low ***,the line contact between the roller and cam ring generates elastic deformation of the cam ring under high loading,leading to obvious speed and torque pulsations and even the detrimental crawl problem of hydraulic *** address this issue,we propose a deformation pre-compensated optimization design approach to compensate for the cam ring deformation in advance,thereby eliminating the influence of cam ring deformation on the hydraulic motor’s *** this approach,the design process is divided into two steps:first,the overall profile of the cam ring is optimized based on the calculated elastic deformation;second,the local profile of cam ring is further optimized until the hydraulic motor’s pulsations no longer ***,a case study is carried out to verify the effectiveness of this *** result indicates the pulsation rate of a deformation pre-compensated cam ring is 40%lower than that of an uncompensated *** study offers an easy and feasible way to design an optimized cam ring profile for low pulsation hydraulic motors.

摘要：Additive manufacturing,also known as three-dimensional(3D)printing,has attracted increasing attention due to the innovations in materials science and manufacturing over recent decades[1].Recently,innovations in biocompatible materials and biology have enabled the extension of 3D printing techniques into bioadditive manufacturing,which focuses on the fabrication of 3D engineered native-like tissues/organs[2].Currently,bioadditive manufacturing technologies can be categorized into inkjet-based bioprinting,microextrusion-based bioprinting,digital light processing(DLP)bioprinting,electric field-assisted bioprinting,and fused deposition modeling(FDM),to name a few[3,4](Fig.1).Artificial tissues and organs with delicate structures,such as the heart[5]and liver[6],have been successfully fabricated using various bioadditive manufacturing techniques.

摘要：Sweat,as a biofluid with the potential for noninvasive collection,provides profound insights into human health conditions,because it contains various chemicals and information to be utilized for the monitoring of well-being,stress levels,exercise,and ***,wearable sweat sensors have been developed as a promising substitute to conventional laboratory sweat detection *** sensors are promising to realize low-cost,real-time,in situ sweat measurements,and provide great opportunities for health status evaluation analysis based on personalized big *** review first presents an overview of wearable sweat sensors from the perspective of basic components,including materials and structures for specific sensing applications and *** strategies and specific methods of the fabrication of wearable power management are also ***,current challenges and future directions of wearable sweat sensors are discussed.

摘要：To improve the computational efficiency of the reliability-based design optimization(RBDO) of flexible mechanism, particle swarm optimization-advanced extremum response surface method(PSO-AERSM) was proposed by integrating particle swarm optimization(PSO) algorithm and advanced extremum response surface method(AERSM). Firstly, the AERSM was developed and its mathematical model was established based on artificial neural network, and the PSO algorithm was investigated. And then the RBDO model of flexible mechanism was presented based on AERSM and PSO. Finally, regarding cross-sectional area as design variable, the reliability optimization of flexible mechanism was implemented subject to reliability degree and uncertainties based on the proposed approach. The optimization results show that the cross-section sizes obviously reduce by 22.96 mm^2 while keeping reliability degree. Through the comparison of methods, it is demonstrated that the AERSM holds high computational efficiency while keeping computational precision for the RBDO of flexible mechanism, and PSO algorithm minimizes the response of the objective function. The efforts of this work provide a useful sight for the reliability optimization of flexible mechanism, and enrich and develop the reliability theory as well.

摘要：Negative Poisson's ratio(NPR) structure has outstanding performances in lightweight and energy absorption, and it can be widely applied in automotive industries. By combining the front anti-collision beam, crash box and NPR structure, a novel NPR bumper system for improving the crashworthiness is first proposed in the work. The performances of the NPR bumper system are detailed studied by comparing to traditional bumper system and aluminum foam filled bumper system. To achieve the rapid design while considering perturbation induced by parameter uncertainties, a multi-objective robust design optimization method of the NPR bumper system is also proposed. The parametric model of the bumper system is constructed by combining the full parametric model of the traditional bumper system and the parametric model of the NPR structure. Optimal Latin hypercube sampling technique and dual response surface method are combined to construct the surrogate models. The multi-objective robust optimization results of the NPR bumper system are then obtained by applying the multi-objective particle swarm optimization algorithm and six sigma criteria. The results yielded from the optimizations indicate that the energy absorption capacity is improved significantly by the NPR bumper system and its performances are further optimized efficiently by the multi-objective robust design optimization method.

摘要：The radial deformation design of turbine disk seriously influences the control of gas turbine high pressure turbine(HPT) blade-tip radial running clearance(BTRRC). To improve the design of BTRRC under continuous operation, the nonlinear dynamic reliability optimization of disk radial deformation was implemented based on extremum response surface method(ERSM), including ERSM-based quadratic function(QF-ERSM) and ERSM-based support vector machine of regression(SR-ERSM). The mathematical models of the two methods were established and the framework of reliability-based dynamic design optimization was developed. The numerical experiments demonstrate that the proposed optimization methods have the promising potential in reducing additional design samples and improving computational efficiency with acceptable precision, in which the SR-ERSM emerges more obviously. Through the case study, we find that disk radial deformation is reduced by about 6.5×10–5 m; δ=1.31×10–3 m is optimal for turbine disk radial deformation design and the proposed methods are verified again. The presented efforts provide an effective optimization method for the nonlinear transient design of motion structures for further research, and enrich mechanical reliability design theory.