摘要：Fast electron-hole recombination issues during titanium dioxide(TiO_(2))photocatalysis limit its application in preventing bacterial infection during bone defect *** this study,TiO_(2)@reduced graphene oxide(rGO)composites were synthesized using a hydrothermal method in which rGO,which possesses very high electrical conductivity,promotes the separation of photoelectron-hole pairs of TiO_(2),thus improving the efficiency of photocatalytic production of reactive oxygen species(ROS).Subsequently,TiO_(2)@rGO composites were introduced into poly-L-lactic acid(PLLA)to prepare bone scaffolds with photocatalytic antibacterial function via selective laser *** results showed that TiO_(2)grew on the surface of rGO and formed a covalent bond connection(Ti-O-C)with rGO.A decreased electrochemical impedance of TiO_(2)@rGO composites was observed,and the transient photocurrent intensity increased from 0.05 to 0.5μA/cm^(2).Analysis of electron spin resonance found that the photocatalytic products of TiO_(2)were·OH and·O^(2-),two kinds of ROS capable of killing bacteria via disrupting the structure of the bacterial membrane in *** experiments showed that the PLLA/TiO_(2)@rGO scaffolds had good antibacterial properties against Escherichia coli and Staphylococcus ***,we report that these scaffolds exhibited both enhanced mechanical properties due to the addition of TiO_(2)@rGO as a reinforcement material and good biocompatibility during cell proliferation.

摘要：Regeneration and reconstruction of bone tissue is always a challenge for clinicians due to the uncertainty of bone repair materials in terms of long-term and efficient effects on ***,we propose a novel strategy combining benidipine,an antihypertensive drug and nanoparticles to synergistically promote the healing of bone *** and porous benidipine-loaded magnesium silicate nanoparticles were prepared and validated for their *** nanoparticles were efficiently taken up by preosteoblasts and uniformly distributed around the *** internalization into cells,the nanosystem is degraded by lysosomes,and the effect of promoting osteogenic differentiation is reflected by the continuous release of benidipine,silicon and magnesium *** results clearly evaluated that the nanoflower-like magnesium silicate delivering benidipine tends to be more appropriate for the bone regeneration in preosteoblasts,indicating that it might be a potential approach in guiding bone repair in clinical applications.

摘要：Introduction Mandibular segmental defects result in significant cosmetic and functional ***,the reconstruction of both the contour and function of the mandible is a challenging *** present,autologous vascularized fibula transplantation is the most common method to reconstruct a mandible with long-span defects[1].

摘要：Nanofibers can mimic natural tissue structure by creating a more suitable environment for cells to grow,prompting a wide application of nanofiber *** this review,we include relevant studies and characterize the effect of nanofibers on mesenchymal stem cells,as well as factors that affect cell adhesion and osteogenic *** hypothesize that the process of bone regeneration in vitro is similar to bone formation and healing in vivo,and the closer nanofibers or nanofibrous scaffolds are to natural bone tissue,the better the bone regeneration process will *** general,cells cultured on nanofibers have a similar gene expression pattern and osteogenic behavior as cells induced by osteogenic supplements in *** involved in cell adhesion(focal adhesion kinase(FAK)),cytoskeletal organization,and osteogenic pathways(transforming growth factor-β(TGF-β)/bone morphogenic protein(BMP),mitogen-activated protein kinase(MAPK),and Wnt)are upregulated *** adhesion and osteogenesis may be influenced by several *** possess certain physical properties including favorable hydrophilicity,porosity,and swelling properties that promote cell adhesion and ***,nanofiber stiffness plays a vital role in cell fate,as cell recruitment for osteogenesis tends to be better on stiffer scaffolds,with associated signaling pathways of integrin and Yes-associated protein(YAP)/transcriptional co-activator with PDZ-binding motif(TAZ).Also,hierarchically aligned nanofibers,as well as their combination with functional additives(growth factors,HA particles,etc.),contribute to osteogenesis and bone *** summary,previous studies have indicated that upon sensing the stiffness of the nanofibrous environment as well as its other characteristics,stem cells change their shape and tension accordingly,regulating downstream pathways followed by adhesion to nanofibers to contribute to ***,additional experiments are needed to id

摘要：In maxillofacial surgery, there is a significant need for the design and fabrication of porous scaffolds with customizable bionic structures and mechanical properties suitable for bone tissue engineering. In this paper, we characterize the porous Ti6Al4V implant, which is one of the most promising and attractive biomedical applications due to the similarity of its modulus to human bones. We describe the mechanical properties of this implant, which we suggest is capable of providing important biological functions for bone tissue regeneration. We characterize a novel bionic design and fabrication process for porous implants. A design concept of “reducing dimensions and designing layer by layer” was used to construct layered slice and rod-connected mesh structure (LSRCMS) implants. Porous LSRCMS implants with different parameters and porosities were fabricated by selective laser melting (SLM). Printed samples were evaluated by microstructure characterization, specific mechanical properties were analyzed by mechanical tests, and finite element analysis was used to digitally calculate the stress characteristics of the LSRCMS under loading forces. Our results show that the samples fabricated by SLM had good structure printing quality with reasonable pore sizes. The porosity, pore size, and strut thickness of manufactured samples ranged from (60.95± 0.27)% to (81.23±0.32)%,(480±28) to (685±31)μm, and (263±28) to (265±28)μm, respectively. The compression results show that the Young’s modulus and the yield strength ranged from (2.23±0.03) to (6.36±0.06) GPa and (21.36±0.42) to (122.85±3.85) MPa, respectively. We also show that the Young’s modulus and yield strength of the LSRCMS samples can be predicted by the Gibson-Ashby model. Further, we prove the structural stability of our novel design by finite element analysis. Our results illustrate that our novel SLM-fabricated porous Ti6Al4V scaffolds based on an LSRCMS are a promising material for bone implants, and are potential

摘要：Following dental implantation,the characteristic bacterial milieu of the oral cavity may lead to peri-implant inflammation,which can negatively impact osseointegration and cause implant *** improve soft tissue sealing around the implant,enhance osseointegration,and improve implant success rates,this paper proposes a composite multifunctional coating(PHG)prepared using gelatin and polydopamine/hydroxyapatite nanoparticles,investigates the effects of this novel coating on cell adhesion,proliferation,antibacterial activity,osteogenic differentiation,and evaluates its immune-related *** PHG coating was proved to have satisfactory hydrophilicity and wettability for cell ***,it improved the expression of adhesion-related genes and proteins in human gingival fibroblasts,indicating its adhesion-promoting ***,bone marrow mesenchymal stem cells exhibited strong osteogenic differentiation potential and mineralization on PHG-coated ***,the PHG coating exhibited antibacterial activity against Streptococcus mutans,as well as anti-inflammatory effects,potentially via the regulation of ***,the proposed PHG coating may promote soft tissue sealing and bone bonding,providing a potential strategy for the surface modification of dental implants.

摘要：Osteoconductive function is remarkably low in bone disease in the absence of bone tissue surrounding the grafting site,or if the bone tissue is in poor ***,an effective bone graft in terms of both osteoconductivity and osteoinductivity is required for clinical ***,the three-dimensional(3D)kagome structure has been shown to be advantageous for bone tissue regeneration due to its mechanical *** this study,a polycaprolactone(PCL)kagome-structure scaffold containing a hyaluronic acid(HA)-based hydrogel was fabricated using a 3D printing *** retention capacity of the hydrogel in the scaffold was assessed in vivo with a rat calvaria subcutaneous model for 3 weeks,and the results were compared with those obtained with conventional 3D-printed PCL grid-structure scaffolds containing HA-based hydrogel and bulk-type HA-based *** retained hydrogel in the kagome-structure scaffold was further evaluated by in vivo imaging system *** further reinforce the osteoinductivity of the kagome-structure scaffold,a PCL kagome-structure scaffold with bone morphogenetic protein-2(BMP-2)containing HA hydrogel was fabricated and implanted in a calvarial defect model of rabbits for 16 *** bone regeneration characteristics were evaluated with hematoxylin and eosin(H&E),Masson’s trichrome staining,and micro-CT image analysis.

摘要：Craniosynostosis is a rare disease in which one or more of the cranial sutures in an infant skull prematurely fuses by turning into bone,with a prevalence of 1 in 2,000—2,500 individuals from reports in Western countries(Wilkie et al.,2017).It may restrict the growth of the brain,leading to some degree of morphological and functional abnormalities,and may affect the neurocognitive function of infants(Lattanzi et al.,2017).Genetic variants underlying craniosynostosis have been identified in cohort studies in Western populations.

摘要：Three-dimensional(3D)printing has attracted increasing research interest as an emerging manufacturing technology for devel-oping sophisticated and exquisite architecture through hierarchical *** has also been employed in various advanced industrial *** development of intelligent biomedical engineering has raised the requirements for 3D printing,such as flexible manufacturing processes and technologies,biocompatible constituents,and alternative ***,state-of-the-art 3D printing mainly involves inorganics or polymers and generally focuses on traditional industrial fields,thus severely limiting applications demanding biocompatibility and *** this regard,peptide architectonics,which are self-assembled by programmed amino acid sequences that can be flexibly functionalized,have shown promising potential as bioinspired inks for 3D ***,the combination of 3D printing and peptide self-assembly poten-tially opens up an alternative avenue of 3D bioprinting for diverse advanced ***,a small but innovative nation,has significantly contributed to 3D bioprinting in terms of scientific studies,marketization,and peptide architectonics,including modulations and applications,and ranks as a leading area in the 3D bioprinting *** review summarizes the recent progress in 3D bioprinting in Israel,focusing on scientific studies on printable components,soft devices,and tissue *** paper further delves into the manufacture of industrial products,such as artificial meats and bioinspired supramolecular architectures,and the mechanisms,physicochemical properties,and applications of peptide ***,Israel contributes significantly to the field of 3D bioprinting and should thus be appropriately recognized.

摘要：The vicious cycle between tumor cell proliferation and bone resorption remarkably elevates the progression and metastasis of bone ***,we fabricated polyethylene glycol-conjugated alendronate-functionalized and chloroquine(CQ)-loaded polydopamine nanoparticles(PPA/CQ)for efficient treatment of bone tumors via breaking the vicious *** nanoparticles were efficiently accumulated to the bone tissues,especially the osteolytic lesions around *** released from PPA/CQ inhibited osteoclastogenesis via preventing the degradation of tumor necrosis factor(TNF)receptor-associated receptor 3 to attenuate the osteolysis in bone *** the other hand,CQ blocked the autophagy in cancer cells,resulting in improved photothermal killing of cancer ***,the in vivo experiment revealed that PPA/CQ-associated treatment efficiently inhibited both tumor growth and *** work suggests that autophagy inhibition-associated photothermal therapy could be a promising strategy for treating malignant bone tumors.