摘要：High-entropy alloys(HEAs)possess outstanding features such as corrosion resistance,irradiation resistance,and good mechan-ical properties.A few HEAs have found applications in the fields of aerospace and *** studies on the deformation mech-anisms of HEAs can guide microstructure control and toughness design,which is vital for understanding and studying state-of-the-art structural *** X-ray and neutron diffraction are necessary techniques for materials science research,especially for in situ coupling of physical/chemical fields and for resolving macro/microcrystallographic information on ***,several re-searchers have applied synchrotron X-ray and neutron diffraction methods to study the deformation mechanisms,phase transformations,stress behaviors,and in situ processes of HEAs,such as variable-temperature,high-pressure,and hydrogenation *** this review,the principles and development of synchrotron X-ray and neutron diffraction are presented,and their applications in the deformation mechanisms of HEAs are *** factors that influence the deformation mechanisms of HEAs are also *** review fo-cuses on the microstructures and micromechanical behaviors during tension/compression or creep/fatigue deformation and the application of synchrotron X-ray and neutron diffraction methods to the characterization of dislocations,stacking faults,twins,phases,and intergrain/interphase stress *** on future developments of synchrotron X-ray and neutron diffraction and on research directions on the deformation mechanisms of novel metals are discussed.

摘要：过渡金属氧化物具有丰富的功能性,但其错综复杂的内部自由度对相图绘制和结构设计提出了挑战.本文中,我们引入了描述相图物理起源的轨道能级序(ELO),并通过对La_(0.67)Sr_(0.33)MnO_(3)(LSMO)氧化物的研究证明了其在相图预测中的有效性.结合DFT计算和实验,我们构建了氧含量和应变关联的LSMO相图,结果表明LSMO结构稳定性与ELO密切相关.据此发现了一种由ELO演化而产生的四倍氧有序相.最后,我们提出了描述轨道分裂程度的轨道弹性定律,阐明了ELO演化的起源,助力功能氧化物的设计.这项研究拓宽了材料科学领域的性能调控手段,并为从轨道角度预测相图提供了思路.

摘要：铂(Pt)是质子交换膜燃料电池(PEMFCs)阳极氢氧化反应(HOR)中最先进的电催化剂.然而,Pt催化剂对CO(工业低成本氢燃料中的杂质)极度敏感从而中毒,这会引起器件性能的急剧衰退,导致器件运行成本高.因此,提高Pt催化剂的CO耐受性对PEMFCs的商业化推广至关重要.在此,我们设计合成了一种独特的PtNiW@WO_(x)核壳纳米线来提高Pt基催化剂对CO的耐受能力.机理研究表明,表面无定形的WO_(x)壳层可以作为分子围栏,在动力学上阻碍CO扩散到达Pt位点.在热力学上,Ni和W元素合金化产生的电子效应可以使Pt的d带中心降低,减弱CO在Pt位点上的化学吸附.此外,亲氧W元素可以加速水的解离,提供更多OH活性物种,促进CO的氧化脱附.因此,在1000ppm CO/H_(2)条件下,所设计的PtNiW@WO_(x)核壳纳米线催化剂表现出优异的HOR抗CO中毒性能,在4000 s后仍能保持超过90%的HOR电流密度,超过了原始的PtNi纳米线和目前报道的绝大多数Pt基催化剂.

摘要：聚合物基固态电解质得益于其易加工性,最有希望应用于下一代固态锂金属电池.目前,聚合物基态电解质的离子电导率提升策略多为加入导锂陶瓷以构建离子传输通道,其提升程度有限.电场在锂离子输运过程中存在重要影响,目前研究中有关电场对锂离子传输的影响机制尚不明确.本文将兼具高离子电导率和高介电常数的铌酸锂嵌入聚偏氟乙烯基体中,设计了一种新型复合固态电解质.铌酸锂颗粒有效调节电解质内部电场结构,增强了离子输运方向电场强度,实现了离子电导率的大幅提升(7.39×10^(-4)S cm^(-1),25℃).该电解质匹配高镍正极和锂金属负极的固态电池可稳定循环1000次以上,容量保持率为72%.该研究为设计下一代固态锂电池用高离子电导复合固态电解质提供了新的策略.

摘要：Oxygen(O_(2))-sensing matrices are promising tools for the live monitoring of extracellular O_(2) consumption levels in long-term cell *** this study,ratiometric O_(2)-sensing membranes were prepared by electrospinning,an easy,low-cost,scalable,and robust method for fabricating ***(ε-caprolactone)and poly(dimethyl)siloxane polymers were blended with tris(4,7-diphenyl-1,10-phenanthroline)ruthenium(II)dichloride,which was used as the O_(2)-sensing probe,and rhodamine B isothiocyanate,which was used as the reference *** functionalized scaffolds were morphologically characterized by scanning electron microscopy,and their physicochemical profiles were obtained by Fourier transform infrared spectroscopy,thermogravimetric analysis,and water contact angle *** sensing capabilities were investigated by confocal laser scanning microscopy,performing photobleaching,reversibility,and calibration curve studies toward different dissolved O_(2)(DO)*** sensing nanofibers showed a high response to changes in DO concentrations in the physiological-pathological range from 0.5%to 20%and good stability under ratiometric *** addition,the sensing systems were highly biocompatible for cell growth promoting adhesiveness and growth of three cancer cell lines,namely metastatic melanoma cell line SK-MEL2,breast cancer cell line MCF-7,and pancreatic ductal adenocarcinoma cell line Panc-1,thus recreating a suitable biological environment in *** O_(2)-sensing biomaterials can potentially measure alterations in cell metabolism caused by changes in ambient O_(2)content during drug testing/validation and tissue regeneration processes.

摘要：A beam dynamics design of 352.2 MHz radio-frequency quadrupole(RFQ) of Turkish Accelerator Center(TAC) project which accelerates continuous wave(CW) proton beam with 30 m A current from 50 ke V to3 Me V kinetic energy has been performed in this study. Also, it includes error analysis of the RFQ, in which some fluctuations have been introduced to input beam parameters to see how the output beam parameters are affected, two-dimensional(2-D) and three-dimensional(3-D) electromagnetic structural design of the RFQ to obtain optimum cavity paramaters that agree with the ones of the beam dynamics. The beam dynamics and error analysis of the RFQ have been done by using ***. Electromagnetic design parameters have been obtained by using SUPERFISH for 2-D cavity geometry and CST Microwave Studio for 3-D cavity geometry.

摘要：RF deflecting cavity can be used for bunch length measurement and is designed to diagnose the beam produced by the photocathode electron gun which was built at Tsinghua University for the Thomson scattering experiment. Detailed discussion and calculation for measuring the 3.5 MeV bunch and another with further acceleration to 50 MeV, which is under development, are presented. A standing-wave deflecting cavity working at 2856 MHz is designed and the power feeding system has been planned.

摘要：In this paper, the basic equations of beam-wave interaction for designing the 220 GHz folded waveguide （FW） backward wave oscillator （BWO） are described. On the whole, these equations are mainly classified into small signal model （SSM）, large signal model （LSM）, and simplified small signal model （SSSM）. Using these linear and nonlinear one-dimensional （1D） models, the oscillation characteristics of the FW BWO of a given configuration of slow wave struc- ture （SWS） can be calculated by numerical iteration algorithm, which is more time efficient than three-dimensional （3D） particle-in-cell （PIC） simulation. The SSSM expressed by analytical formulas is innovatively derived for determining the initial values of the FW SWS conveniently. The dispersion characteristics of the FW are obtained by equivalent circuit analysis. The space charge effect, the end reflection effect, the lossy wall effect, and the relativistic effect are all considered in our models to offer more accurate results. The design process of the FW BWO tube with output power of watt scale in a frequency range between 215 GHz and 225 GHz based on these 1D models is demonstrated. The 3D PIC method is adopted to verify the theoretical design results, which shows that they are in good agreement with each other.

摘要：为古典转变(q1， q2 )(Aq1 + Bq2， Cq1 + Dq2 ) 广告 CB 1，我们由使用矩阵的 LDU 分解发现它的量机械图象。明确的操作员，，并且？被导出，他们的物理意思被揭示，这也为解开一些指数的操作员提供一个新方法。

摘要：The laser wire （LW） method has been demonstrated to be an effective non-interceptive technique for measuring transverse profile and emittance of electron beams in colliders, storage rings and dumping rings. In this paper, we present an improved design of high repetition LW system for high average power free electron lasers （HAP FELs） and energy recovery linacs （ERLs）. This improved LW utilizes the excess power of the photocathode drive laser, thus making itself much cheaper and simpler. The system main parameters are optimized with numerical calculations and Monte Carlo simulations, indicating that resolutions would be better than 100 ~m and scanning time less than 1 minute. Status of the experiment preparation is also presented.