摘要：The performance of broadband polarizing beam splitters(PBSs) is sensitive to the incident *** taking account of the spectrum of the laser source and using the needle optimization method,a large acceptance angle PBS for laser-based displays is *** average degrees of polarization in transmission and reflection can reach 0.989 and 0.980 for an acceptance angle of 13.6?in air using two materials,while better results of 0.993 and 0.989 for an acceptance angle of 14.8?in air are attained when three common materials are *** designs consist of 40 layers.

摘要：This paper describes a new method to design a laser mirror with high reflectivity, wide reflection bandwidth and high laser- induced damage threshold. The mirror is constructed by three materials of HfO/TiO2/SiO2 based on electric field and temperature field distribution characteristics of all-dielectric laser high reflector. TiO/SiO2 stacks act as the high reflector （HR） and broaden the reflection bandwidth, while HfO2/SiO2 stacks are used for increasing the laser resistance. The HfO/ TiO/SiO2 laser mirror with 34 layers is fabricated by a novel remote plasma sputtering deposition. The damage threshold of zero damage probability for the new mirror is up to 39.6 J/cm^2 （1064 nm, 12 ns）. The possible laser damage mechanism of the mirror is discussed.

摘要：A flat-top interleaver,in which a mirror on one arm of the Michelson interferomefer is replaced by a G-T resonator,is *** the interleaver,the parameters including the channel spacing of 50 GHz,ripple less than 0.05 dB,-0.5 dB passband of 43 GHz(86% of the spacing),-30 dB stopband of 42 GHz(84% of the spacing),and a channel isolation higher than 40 dB,are achieved.

摘要：This paper describes the design of modulation, compression coding and transmission control in underwater acoustic color image transmission system. This design adapts a special system of modulation and transmission control based on a DSP(Digital Signal Processing) chip, to cope with the complex underwater acoustic channel. The hardware block diagram and software flow chart are presented.

摘要：To date, the cost-effective utilization of solar energy by photovoltaics for large-scale deployment remains challenging. Further cost minimization and efficiency maximization, through reduction of material consumption, simplification of device fabrication as well as optimization of device structure and geometry, are required. The usage of 1D nanomaterials is attractive due to the outstanding light coupling effect, the ease of fabrication, and integration with one-dimensional(1-D) semiconductor materials. The light absorption efficiency can be enhanced significantly, and the corresponding light-toelectricity conversion efficiency can be as high as their bulk counterparts. Also, the amount of active materials used can be reduced. This review summarizes the recent development of 1-D nanomaterials for photovoltaic applications, including the anti-reflection, the light absorption,the minority diffusion, and the semiconductor junction properties. With solid progress and prospect shown in the past 10 years, 1-D semiconductor nanomaterials are attractive and promising for the realization of high-efficiency and low-cost solar cells.