摘要：A combination of hydrogels and microfluidics allows the construction of biomimetic three-dimensional(3D)tissue models in vitro,which are also known as *** hydrogel patterningwith awell-controlled spatial distribution is typically achieved by embedding sophisticated microstructures to act as a ***,these physical barriers inevitably expose cells/tissues to a less physiologically relevant microenvironment than in vivo ***,we present a novel dissolvable temporary barrier(DTB)strategy that allows robust and flexible hydrogel patterning with great freedom of design and desirable flow stimuli for cellular *** key aspect of this approach is the patterning of a water-soluble rigid barrier as a guiding path for the hydrogel using stencil printing technology,followed by a barrier-free medium perfusion after the dissolution of the *** and multiple tissue compartments with different geometries can be established using either straight or curved DTB *** effectiveness of this strategy is further validated by generating a 3D vascular network through vasculogenesis and angiogenesis using a vascularized microtumor *** a new proof-of-concept in vasculature-on-a-chip,DTB enables seamless contact between the hydrogel and the culture medium in closed microdevices,which is an improved protocol for the fabrication ofmultiorgan ***,we expect it to serve as a promising paradigm for organ-on-a-chip devices for the development of tumor vascularization and drug evaluation in the future preclinical studies.

摘要：This article takes 2016-2022 as the inspection period to construct an evaluation index system for the green development level of the new energy vehicle *** entropy method and comprehensive index are used to measure the green development level of the new energy vehicle industry in Chongqing,and compared with neighboring provinces such as Yunnan,Guizhou,and *** recommendations are proposed to promote the development of the new energy vehicle industry in Chongqing City.

摘要：A rotating disc column (RDC) with inner diameter 68 mm and 28 compartments is used in this study. Parameters including Sauter mean diameter, hold-up and mass transfer coefficient are measured experimentally un-der different operating conditions. The correlations in literature for molecular diffusion and enhancement factor equation including eddy diffusion, circulation and oscillation of drops are evaluated. A new equation for the effec-tive diffusion coefficient as a function of Reynolds number is proposed. The calculated values of mass transfer co-efficient and column height from the previous equations and present equation are compared with the experimental data. The results from the present equation are in very good agreement with the experimental results, which may be used in designing RDC columns.

摘要：Controlling process parameters of lost foam casting （LFC） enables this process to produce defect-free complex shape castings. An experimental investigation on lost foam casting of an A1-Si-Cu cast alloy was carried out. The effects of pouting temperature, slurry viscosity, vibration time and sand size on surface finish, shrinkage porosity and eutectic silicon spacing of thin-wall casting were investigated. A full two-level factorial design of experimental technique was used to identify the significant manufacturing factors affecting the properties of casting. Pouring temperature was found as the most significant factor affecting A1-Si-Cu lost foam casting quality. It was shown that flask vibration time interacted with pouring temperature influenced euteetic silicon spacing and porosity percentage significantly. The results also revealed that the surface quality of the samples cast in fine sand moulds at higher pouring temperatures was almost unchanged, while those cast in coarse sand moulds possessed lower surface qualities. Furthermore, variation in slurry viscosity showed no significant effect on the evaluated properties compared to other parameters.

摘要：Conventional attractive magnetic force models (proportional to the coil current squared and inversely proportional to the gap squared) cannot simulate the nonlinear responses of magnetic bearings in the presence of electromagnetic losses,flux leakage or saturation of *** this paper,based on results from an experimental set-up designed to study magnetic force,a novel parametric model is presented in the form of a nonlinear polynomial with unknown *** parameters of the proposed model are identified using the weighted residual *** of the model identified were performed by comparing the results in time and frequency *** results show a good correlation between experiments and numerical simulations.

摘要：Semi-solid processing （SSP） of A356 aluminum alloy was discussed via cooling slope （CS） method. The D-optimal design of experiment （DODE） was employed for experimental design and analysis of results. 38 random experiments obtained by software were carried out. In experimental stage, the molten aluminum alloy was poured on an inclined plate with different lengths of 100, 300 and 500 mm set at 30°, 45° and 60° of slope angles respectively. Three different pouring temperatures of 660, 680 and 700 ℃ were also used. After the casting process, the partial re-melting treatment was carried out at 590 ℃ for different isothermal time of 5, 8 or 12 min. The combined effect of these factors on globularity of the primary α（Al） crystals was investigated and optimized using DODE. The results indicated that the primary dendritic phase in the conventionally cast A356 alloy was transformed into a non-dendritic one in ingots cast over a cooling plate. The CS processed samples exhibited a globular structure only after re-heating to semi-solid region. The optimum values of pouring temperature, cooling length, slope angle and isothermal holding time were found to be 660 ℃, 360 mm, 48°, and 9 min, respectively. In this case, the globularity of primary crystals was obtained, about 0.91. The obtained model is highly significant with a correlation coefficient of 0.9860.

摘要：We design a grey wolf optimizer hybridized with an interior point algorithm to correct a faulty antenna array. If a single sensor fails, the radiation power pattern of the entire array is disturbed in terms of sidelobe level（SLL） and null depth level（NDL）, and nulls are damaged and shifted from their original locations. All these issues can be solved by designing a new fitness function to reduce the error between the preferred and expected radiation power patterns and the null limitations. The hybrid algorithm has been designed to control the array＇s faulty radiation power pattern. Antenna arrays composed of 21 sensors are used in an example simulation scenario. The MATLAB simulation results confirm the good performance of the proposed method, compared with the existing methods in terms of SLL and NDL.

摘要：The aim of this work is to investigate and optimize the effects of the leaching parameters on the selective leaching of zinc from electric arc furnace steelmaking dust （EAFD）. The response surface method was applied on the basis of a three-level Box–Behnken experimental design method for optimization of selective leaching parameters of zinc from EAFD. The leaching recoveries of zinc （YZn） and iron （YFe） were taken as the response variables, where the concentration of sulphuric acid （X1, mol/L）, leaching temperature （X2, °C）, leaching time （X3, min）, and liquid/solid ratio （X4, mL/g） were considered as the independent variables （factors）. The mathematical model was proposed. Statistical ANOVA analysis and confirmation tests were applied. A maximum of 79.09% of zinc was recovered while the minimum iron recovery was 4.08% under the optimum conditions of leaching time 56.42 min, H2SO4 concentration 2.35 mol/L, leaching temperature 25 °C and liquid/solid ratios. By using ANOVA, the most influential factors on leaching of zinc and iron were determined as H2SO4 concentration and leaching temperature, respectively. The proposed model equations using response surface methodology show good agreement with the experimental data, with correlation coefficients （R2） of 0.98 for zinc recovery and 0.97 for iron recovery.

摘要：This study was carried out to investigate the possibility of titanium alloy metal powder production using low-power plasma *** argon DC non-transferred arc plasma torch was designed,and numerical analysis was conducted to determine the plasma jet properties and wire *** highest velocities inside the nozzle attachment were between 838 and 1178 m/*** velocities of the jets at the apex were between 494 and 645 m/s for different gas flow *** studied plasma gas flow rates had no significant effect on the effective plasma jet *** was shown that the plasma jet length can be estimated by numerical analysis using the temperature and velocity changes of the plasma jet over *** was observed that the powders produced were spherical without any *** a result of this study,a plasma torch was developed and powder production was performed successfully by using relatively low torch power.

摘要：Mass movements are very common problems in the eastern Black Sea region of Turkey due to its climate conditions, geological, and geomorphological characteristics. High slope angle, weathering, dense rainfalls, and anthropogenic impacts are generally reported as the most important triggering factors in the region. Following the portal slope excavations in the entrance section of Cankurtaran tunnel, located in the region, where the highly weathered andesitic tuff crops out, a circular toe failure occurred. The main target of the present study is to investigate the causes and occurrence mechanism of this failure and to determine the feasible remedial measures against it using finite element method(FEM) in four stages. These stages are slope stability analyses for pre-and postexcavation cases, and remediation design assessments for slope and tunnel. The results of the FEM-SSR analyses indicated that the insufficient initial support design and weathering of the andesitic tuffs are the main factors that caused the portal failure. After installing a rock retaining wall with jet grout columns and reinforced slope benching applications, the factor of safety increased from 0.83 to 2.80. In addition toslope stability evaluation, the Rock Mass Rating(RMR), Rock Mass Quality(Q) and New Austrian Tunneling Method(NATM) systems were also utilized as empirical methods to characterize the tunnel ground and to determine the tunnel support design. The performance of the suggested empirical support design, induced stress distributions and deformations were analyzed by means of numerical modelling. Finally, it was concluded that the recommended stabilization technique was essential for the dynamic long-term stability and prevents the effects of failure. Additionally, the FEM method gives useful and reasonably reliable results in evaluating the stability of cut slopes and tunnels excavated both in continuous and discontinuous rock masses.