摘要：The main configuration of ship construction consists of standard and fabricated stiffening members,such as T-sections,which are commonly used in *** the welding process,the nonuniform heating and rapid cooling lead to welding imperfections such as out-of-plane distortion and residual *** to these imperfections,the fabricated structural members may not attain their design load,and removing these imperfections will require extra *** present work investigated controlling these imperfections at both the design and fabrication stages.A typical fabricated T-girder was selected to investigate the problem of these imperfections using double-sided welding.A numerical simulation based on finite element modeling(FEM) was used to investigate the effects of geometrical properties and welding sequence on the magnitude of the welding imperfections of the *** FEM results were validated with the experimental measurements of a double-sided fillet *** the design stage,the optimum geometry of the fabricated T-girder was determined based on the minimum steel weight and out-of-plane ***,regarding the fabrication stage,a parametric study with two variables(geometrical properties and welding sequence)was conducted to determine the optimum geometry and welding sequence based on the minimum welding out-of-plane *** the flange thickness and reducing the breadth while keeping the T-girder section modulus constant reduced the T-girder weight and out-of-plane *** welding produced a significant reduction in the out-of-plane distortion,while an insignificant increase in the compressive residual stress occurred.

摘要：Despite being a promising photoanode material for water splitting,WO_(3) has low conductivity,high onset potential,and sluggish water oxidation *** this study,we designed Ti-doped WO_(3) nanoplate arrays on fluoride-doped tin oxide by a seed-free hydrothermal method,and the effects of doping on the photoelectrochemical performance were *** optimal Ti-doped WO_(3) electrode achieved a photocurrent density of 0.53 mA/cm^(2) at 0.6 V(vs Ag/AgCl),110%higher than that of pure WO_(3) nanoplate ***,a significant cathodic shift in the onset potential was observed after doping.X-ray photoelectron spectroscopy valence band and ultraviolet–visible spectra revealed that the band positions of Ti-doped WO_(3) photoanodes moved upward,yielding a lower onset ***,electrochemical impedance spectroscopy measurements revealed that the conductivities of the WO_(3) photoanodes improved after doping,because of the rapid separation of photo-generated charge ***,we report a new design route toward efficient and low-cost photoanodes for photoelectrochemical applications.

摘要：Coal washing plants are usually fed from various sources. Coals include different combinations which should be considered for increasing the plant proficiency. Thus different methods have been used to enrich various coal types. In this study, Alborz-Sharghi coal washing plant was investigated which is fed from five coalmines. The optimum recovery was achieved for all coal types individually through experimental design. The controllable operation parameters in the experiments were collector dosage,frother dosage, solid percent content and particle size. The other parameters such as impeller speed,pH, conditioning time and flotation time were kept constant for all experiments. The optimum combination of coals was also specified. The results show that the optimum recovery for coal blends is 91.2%which shows much improvement relative to the plant conditions.

摘要：A novel narrow-band filter based on the dual-core doped photonic crystal fiber is *** optimizing structure parameters of the photonic crystal fiber,the index curves of the fundamental modes for the two cores are crossed at 1.55 μm and the wavelength-selective coupling is *** characteristics of the filter are numerically simulated by the full-vector beam propagation *** the simulation results show that the coupling length and the bandwidth of the filter are 16.4 mm and 9 nm at-3 dB loss,*** demonstrates the advantages of the filter with a small size,a low transmission loss and the narrow-band width.

摘要：Bone cancer is a critical health problem on a global scale,and the associated huge clinical and economic burdens are still *** many clinical approaches are currently used for bone cancer treatment,these methods usually affect the normal body functions and thus present significant ***,advanced materials and additive manufacturing have opened up promising avenues for the development of new strategies targeting both bone cancer treatment and post-treatment bone *** paper presents a comprehensive review of bone cancer and its current treatment methods,particularly focusing on a number of advanced strategies such as scaffolds based on advanced functional materials,drug-loaded scaffolds,and scaffolds for photothermal/magnetothermal ***,the main research challenges and future perspectives are elaborated.

摘要：This paper presents a novel topology optimization method to design graded lattice structures to minimize the volume subject to displacement constraints based on the independent continuous mapping(ICM)***,the effective elastic properties of graded unit cells are analyzed by the strain energy-based homogenization method.A surrogate model using quartic polynomial interpolation is built to map the independent continuous topological variable to the effective elastic matrix of the unit cell and set up the relationship between the macroscale structure and microscale unit ***,a lightweight topology optimization model is established,which can be transformed into an explicitly standard quadratic programming problem by sensitivity analysis and solved by dual sequential quadratic ***,several numerical examples demonstrate that graded lattice structures have a better lightweight effect than uniform lattice structures,which validates the effectiveness and feasibility of the proposed *** results show that graded lattice structures become lighter with increasing displacement *** addition,some diverse topological configurations are *** method provides a reference for the graded lattice structure design and expands the application of the ICM method.

摘要：As a bone scaffold,meeting all basic requirements besides dealing with other bone-related issues-bone cancer and accelerated regeneration-is not expected from traditional scaffolds,but a newer class of scaffolds called *** a clinical point of view,being a multifunctional scaffold means reducing in healing time,direct costs-medicine,surgery,and hospitalization-and indirect costs-loss of mobility,losing job,and *** main aim of the present review is following the multifunctional bone scaffolds trend to deal with both bone regeneration and cancer *** consideration is given to different fabrication techniques which have been applied to yield these materials spanning from traditional to modern ***,the hierarchical structure of bone plus bone cancers and available medicines to them are introduced to familiarize the potential reader of review with the pluri-disciplinary essence of the ***,a brief discussion relating to the future trend of these materials is provided.

摘要：This paper presents the design method of hybrid drive system for the minibus with some limited conditions. The approach of design hybrid drive system is based on the dynamic modeling and simulation of the hybrid minibus with planetary gear system. The main target of the design is to obtain the optimal design with the proper hybrid drive configuration and control for a given set of design constraints. In oder to meet the design target, it＇s necessary to adjust some parameters such as mechanical ratios and parameters of battery pack as well as control by simulation. During simulation the transient operating process can be studied in details with the dynamic model in Matlab/Simulink. The control strategy can be optimized by running the simulation and monitoring the operation of each components： the operating area of internal combustion engine （ICE）, fuel consumption （energy consumption）, the power distribution, the torque and rotary speed of ICE and motor, the operating efficiency of motor, the aheration of battery state of charge （SOC）, current and voltage.

摘要：The aim of this study is to use a new configuration of porous media in a heat exchanger in continuous hydrothermal flow synthesis(CHFS)system to enhance the heat transfer and minimize the required length of the heat *** this purpose,numerous numerical simulations are performed to investigate performance of the system with porous ***,the numerical simulation for the heat exchanger in CHFS system is validated by experimental ***,porous media is added to the system and six different thicknesses for the porous media are examined to obtain the optimum thickness,based on the minimum required length of the heat ***,by changing the flow rate and inlet temperature of the product as well as the cooling water flow rate,the minimum required length of the heat exchanger with porous media for various inlet conditions is *** investigations indicate that using porous media with the proper thickness in the heat exchanger increases the cooling rate of the product by almost 40% and reduces the required length of the heat exchanger by approximately 35%.The results also illustrate that the most proper thickness of the porous media is approximately equal to 90% of the product tube's *** of this study lead to design a porous heat exchanger in CHFS system for various inlet conditions.

摘要：In this paper, control design is investigated for hard disk drives in mobile applications with unknown external arbitrarily fast time-varying disturbances. The disturbances can be estimated with exponential accuracy using the proposed disturbance observer based on a series of integral filters. The position error signal will converge to zero with the proposed control technique for systems subjected to the unknown disturbances. The effectiveness of the proposed method is demonstrated by extensive simulation studies.