摘要：This paper presents a comprehensive survey for the situation of light environment in large commercial building through architecture design information,subjective and objective fieldwork and online survey for three typical commercial building forms( centralized form, covered mall shopping center, lifestyle center).Descriptive method is used for statistical analysis which includes the evaluation of light environmental quality,subjective assessment among daylight and artificial illumination,effect of physical characteristics on subjective assessment of light environment. Based on the results of statistical analysis,the improving strategies for light environment are proposed in terms of making use of daylight,artificial lighting design and improvement of the overall light environmental quality. The design strategies which based on the consumer needs is very important can provide help for further impact prediction on the quality of light environment.

摘要：This paper discusses the model-based predictive controller design of networked nonlinear systems with communica- tion delay and data loss. Based on the analysis of the closed-loop networked predictive control systems, the model-based networked predictive control strategy can compensate for communication delay and data loss in an active way. The designed model-based predictive controller can also guarantee the stability of the closed-loop networked system. The simulation re- suits demonstrate the feasibility and efficacy of the proposed model-based predictive controller design scheme.

摘要：An optimum design model has been proposed for carbon/carbon ablative property based on genetic algorithm,in which the optimum parameters are the number of woven satins,K of fiber bundles,layers per unit height,the average distance of puncture fibers in Z direction and Ply Stacking angle,and the constraint conditions are the density and diameter of carbon fibers and the density of carbon *** results demonstrate that after optimization,the overall height of the ablative carbon/carbon surface is reduced by 56.5%,the standard deviation is reduced by 34.9% and the surface roughness is reduced by 12.6%,which suggests the remarkable improvement of ablative *** present investigation can provide practical methodology for the optimum design of carbon/carbon ablative property and the development of new carbon/carbon composites.

摘要：为了研究供暖环境中心理感知控制对人体热感觉和热舒适的影响,设计了心理学对照实验。实验共有2个工况,每个工况的室温保持在18℃,但冷辐射温度不同,有24名受试者参加了本次实验。实验共进行120 min,前30 min为适应期,后60 min为实验期的“不可调”工况,受试者提前被告知不可调节室温;最后30 min为实验期的“可调”工况,受试者被告知可以根据自身的热期望调节室温,但实际上实验员并没有调节室温。结果表明,感知控制对热感觉的影响效果与热期望有关,对不同热期望的人群产生了不同影响。对热中性环境有强烈期望的人群,感知控制可以满足他们的热期望进而改善热感觉。在室温偏低的环境中,这种效应会更加明显。对于热期望较低的人群,感知控制可能会降低他们对所处环境的热耐受性,从而导致不适感增强。本文研究成果将为心理学效应研究提供理论支撑,也为供暖室温个性化调控提供参考。

摘要：In order to achieve an access to strain sensor data with wireless transmission in bridge engineering structure testing, a wireless strain test system is presented based on the resistance strain sensor of networks. The wireless bridge strain test system composed of master station and substation adopts the wireless method to realize the high accuracy data acquisition between the master station and the substation under a reliable communication protocol. The system has been tested in contrast with the present strain apparatus. Results show that the wireless system is high-reliable, and has many characteristics such as high efficiency, good precision, high stability with low cost, and good flexibility, without using the present communication network.

摘要：A method of topology synthesis based on graph theory and mechanism combination theory was applied to the configuration design of locomotion systems of lunar exploration rovers(LER).Through topology combination of wheel structural unit,suspension unit,and connecting device unit between suspension and load platform,some new locomotion system configurations were proposed and the metrics and indexes to evaluate the performance of the new locomotion system were *** evaluation and comparison between two LER with locomotion systems of different configurations were *** analysis results indicate that the new locomotion system configuration has good trafficability performance.

摘要：Co87Nb10Zr3,Co76Nb19Zr5,Co64Nb26Zr10 and Co64Nb16Zr20 amorphous films were deposited on noncrystalline glass substrates by DC unbalanced magnetron sputtering. The compositions of amorphous films were tailored in the light of the individual deposition rate of Co,Nb and Zr. The amorphous films with the anticipated composition were prepared by means of co-sputtering Co,Nb and Zr targets simultaneously. It is indicated that there is interaction among three targets during co-sputtering. The morphology and composition of the films were observed by SEM,AFM and EDS. The structure and magnetic property were measured by XRD and physical property measurement system(PPMS) . The coercivity changes with the composition,varying from 240 to 1 600 A/m. After vacuum isothermal annealing at temperatures of 475,500,525 and 550 ℃ for 15 and 30 min,respectively,it is found that high Nb content is beneficial to improving thermal stability of amorphous films. The crystallized films have the mean grain size of 2-19 nm.

摘要：This paper uses two navigation schemes to prove the potential of a novel autonomous orbit determination with stellar horizon atmospheric refraction measurements. Scheme one needs a single processor and uses an extended Kalman filter. The second scheme needs two parallel processors. One processor uses a batched least-square initial state estimator and a high-precision dynamic state propagator. The other processor uses a real-time orbit predictor. Simulations have been executed respectively for three types (low/medial/high) of satellite orbits on which various numbers of stars are observed. The results show both schemes can autonomously determine the orbits with a considerable performance. The second scheme in general performs a little better than the first scheme.

摘要：We present a method for computed tomography(CT)image processing and modeling for tibia microstructure,achieved by using computer graphics and fractal *** the large-scale image data of tibia species with DICOM standard for clinical applications,we take advantage of algorithms such as image binarization,hot pixel removing and close operation to obtain visually clear image for tibia *** of these images are based on 20 CT scanning images with 30μm slice thickness and 30μm interval and continuous changes in *** each pore,we determine its profile by using an improved algorithm for edge ***,to calculate its three-dimensional fractal dimension,we measure the circumference perimeter and area of the pores of bone microstructure using a line fitting method based on the least ***,we put forward an algorithm for the pore profiles through ellipse *** results show that the pores have significant fractal characteristics because of the good linear correlation between the perimeter and the area parameters in log–log scale coordinates system,and the ratio of the elliptical short axis to the long axis through ellipse fitting tends to *** on support vector machine and structural risk minimization principle,we put forward a mapping database theory of structure parameters among the pores of CT images and fractal dimension,Poisson’s ratios,porosity and equivalent *** this basis,we put forward a new concept for 3D modeling called precision-measuring digital expressing to reconstruct tibia microstructure for human hard tissue.

摘要：A novel continuous-flow PCR chip adopting self-heating, passive-cooling mode to realize the DNA fragments amplification was presented. Using the ANSYS finite element analysis, the temperature distribution of the chip is simulated and *** optimal size of the chip is 30×22 mm2, the roundabout micro-channel is the 90 μm width, 40 μm depth. Two micro-heater with the nickel-chrome alloy material film are formed on the side of silicon belonging to denaturation and renaturation zones needed for PCR reaction, and two adiabatic structures with groove on side of silicon by anisotropy etching. By the mode of heating local zones at single side, three wider constant temperature zones could be formed, which are 60 ℃,72 ℃,95 ℃ and suitable for PCR,and the temperature-difference could be restricted in less than 5 ℃.