摘要：Designing Fischer-Tropsch synthesis(FTS)catalysts to selectively produce liquid hydrocarbon fuels is a crucial ***,we selectively introduced Co nanoparticles(NPs)into the micropores and mesopores of an ordered mesoporous MFI zeolite(OMMZ)through impregnation,which controlled the carbon number distribution in the FTS products by tuning the position of catalytic active sites in differently sized *** Co precursors coordinated by acetate with a size of 9.4×4.2×2.5Åand by 2,2‘-bipyridine with a size of 9.5×8.7×7.9Å,smaller and larger than the micropores(ca.5.5Å)of MFI,made the Co species incorporated in OMMZ's micropores and mesopores,*** carbon number products synthesized with the Co NPs confined in mesopores were larger than that in *** high jet and diesel selectivities of 66.5%and 65.3%were achieved with Co NPs confined in micropores and mesopores of less acidic Na-type OMMZ,*** and jet selectivities of 76.7%and 70.8%were achieved with Co NPs confined in micropores and mesopores of H-type OMMZ with Brönsted acid sites,respectively.A series of characterizations revealed that the selective production of diesel and jet fuels was due to the C-C cleavage suppressing of heavier hydrocarbons by the Co NPs located in mesopores.

摘要：Menisci are fundamental fibrocartilaginous organs in knee joints. The injury in meniscus can impair normal knee function and predisposes patients to osteoarthritis. This study prepared decellularized meniscus scaffolds using a 1% （w/w） sodium dodecyl sulfate solution and sufficient rinsing steps. Complete cell removal was verified by hematoxylin and eosin staining and DNA content assay. Decellularized menisci had accordant tension properties to intact ones, but with declined compression properties. This occurred because the collagen fiber was not damaged but glycosami- noglycans was significantly lost during the decellularization process, which was confirmed by biochemical assay and histology staining. In vitro cytotoxicity assay demonstrated that decellularized meniscus scaffolds have no toxicity on L929 murine fibroblasts and porcine chondrocytes. Further experiment showed that porcine chondrocytes could adhere and proliferate on the scaffold surface, and some cells even could infiltrate into the scaffold. All results showed the potential of this decellularized meniscus to be the scaffolds in tissue engineering.

摘要：Interstitial Cajal-like cells are a distinct type of interstitial cell with a wide distribution in mammalian organs and tissues,and have been given the name"telocytes".Recent studies have demonstrated the potential roles of telocytes in heart development,renewal,and ***,further research on the functions of telocytes is limited by the complicated in vivo *** study was designed to construct engineered heart tissue(EHT)as a three-dimensional model in vitro to better understand the role of telocytes in the architectural organization of the *** were constructed by seeding neonatal cardiomyocytes in collagen/Matrigel scaffolds followed by culture under persistent static *** in EHTs were identified by histology,toluidine blue staining,immunofluorescence,and transmission electron *** results from histology and toluidine blue staining demonstrated widespread putative telocytes with compact toluidine blue-stained nuclei,which were located around *** from the cell bodies showed a characteristic dichotomous branching pattern and formed networks in *** revealed positive staining of telocytes for CD34 and vimentin with typical moniliform prolongations.A series of electron microscopy images further showed that typical telocytes embraced the cardiomyocytes with their long prolongations and exhibited a marked appearance of nursing cardiomyocytes during the construction of *** finding highlights the great importance of telocytes in the architectural organization of *** also suggests that EHT is an appropriate physical and pathological model system in vitro to study the roles of telocytes during heart development and regeneration.

摘要：电化学CO_(2)还原(CO_(2)RR)是一种很有前景的技术,可以将二氧化碳转化为多种增值化学品,从而达到减缓温室效应的目的.然而,实现目标产品的高催化活性、选择性和稳定性仍然是一个很大的挑战.本文通过还原Sn掺杂的Bi2S3制备了间隙掺杂的Snx-Bi (x为Sn与Bi的原子比,x=1/2,1/16,1/24或1/40)纳米线束(NBs).值得注意的是,Sn1/24-Bi NBs在1400 mV的宽电位窗口内表现出超高的甲酸盐选择性(从-0.5到-1.9 V vs.可逆氢电极(RHE),法拉第效率超过90%),在-1.9 V ***时,电流密度达到了-319 mA cm^(-2),可满足工业使用需求.此外,还实现了在~-200 mA cm^(-2)条件下超过84 h的超长稳定性.实验结果和密度泛函理论计算表明,间隙掺杂Sn优化了*OCHO中间体的吸附亲和力,降低了铋催化剂的电子转移能垒,从而获得了显著的CO_(2)RR性能.本研究为设计具有优异催化活性、选择性和耐久性的掺杂型电催化剂用于CO_(2)RR为甲酸盐提供了启示.

摘要：Electronic skins and flexible pressure sensors are important devices for advanced healthcare and intelligent *** is a key parameter of flexible pressure *** introducing surface microstructures in a capacitive-type sensor can significantly improve its sensitivity,the signal becomes nonlinear and the pressure response range gets much narrower,significantly limiting the applications of flexible pressure ***,we designed a pressure sensor that utilizes a nanoscale iontronic interface of an ionic gel layer and a micropillared electrode,for highly linear capacitance-to-pressure response and high sensitivity over a wide pressure *** micropillars undergo three stages of deformation upon loading:initial contact(0-6 k Pa)and structure buckling(6-12 k Pa)that exhibit a low and nonlinear response,as well as a post-buckling stage that has a high signal linearity with high sensitivity(33.16 k Pa-1)over a broad pressure range of 12-176 k *** high linearity lies in the subtle balance between the structure compression and mechanical matching of the two materials at the gel-electrode *** sensor has been applied in pulse detection,plantar pressure mapping,and grasp task of an artificial *** work provides a physical insight in achieving linear response through the design of appropriate microstructures and selection of materials with suitable modulus in flexible pressure sensors,which are potentially useful in intelligent robots and health monitoring.

摘要：Rapid advances in DNA synthesis techniques have allowed the assembly and engineering of viral and microbial *** eukaryotic organisms,with their larger genomes,abundant transposons,and prevalent epigenetic regulation,present a new frontier to synthetic *** synthetic genomics have long been proposed,and exciting progress has been made using the top-down *** this perspective,we propose applying bottom-up genome synthesis in multicellular plants,starting from the model moss Physcomitrium patens,in which homologous recombination,DNA delivery,and regeneration are possible,although further optimizations are *** then discuss technical barriers,including genome assembly and plant transformation,associated with synthetic genomics in seed plants.

摘要：精心设计的异质结光催化剂已经被证明能够有效地促进电荷转移,从而实现特定的迁移路径和长的载流子寿命,这在进一步提高性能方面具有巨大的潜力.然而,传统二元异质结光催化剂的光催化性能仍然受到其较低的载流子分离效率的影响.本文报道了一种通过原位面对面生长直接合成双Ⅱ型SnO_(2)@ZnS-ZHS(ZHS=ZnSn(OH)_(6))三元异质结的策略.基于可靠的实验和理论计算,揭示了双Ⅱ型SnO_(2)@ZnSZHS的载流子动力学提升机制.SnO_(2)的光生空穴(h+)能够分别迁移到ZHS和ZnS的价带,确保了SnO_(2)@ZnS-ZHS可以保持双氧化电位来产生足够的羟基自由基(·OH)参与NO氧化反应.这种独特的双Ⅱ型SnO_(2)@ZnS-ZHS三元结构在光照30 min后对NO去除率高达44.5%,活性分别是ZHS的23.5倍、SnO_(2)的29.7倍和ZnS的15.9倍.光催化活性提升与独特的双Ⅱ型反应机理反映了SnO_(2)@ZnS-ZHS异质结构的优势,本工作有望为三元异质结的设计提供可行的思路.

摘要：Confined low dimensional charges with high density such as two-dimensional electron gas(2 DEG)at interfaces and charged domain walls in ferroelectrics show great potential to serve as functional elements in future ***,stabilization and control of low dimensional charges is challenging,as they are usually subject to enormous depolarization ***,we demonstrate a method to fabricate tunable charged interfaces with~77°,86°and 94°head-to-head polarization configurations in multiferroic Bi Fe O_(3) thin films by grain boundary *** adjacent grains are cohesively bonded and the boundary is about 1 nm in width and devoid of any amorphous ***,the polarization remains almost unchanged near the grain boundaries,indicating the polarization charges are well compensated,i.e.,there should be two-dimensional charge gas confined at grain *** the tilt angle of the grain boundaries enables tuning the angle of polarization configurations from 71°to 109°,which in turn allows the control of charge density at the grain *** general and feasible method opens new doors for the application of charged interfaces in next generation nanoelectronics.