摘要：The performance of uplink distributed massive multiple-input multiple-output(MIMO)systems with crosslayer design(CLD) is investigated over Rayleigh fading channel, which combines the discrete rate adaptive modulation with truncated automatic repeat request. By means of the performance analysis, the closed-form expressions of average packet error rate(APER)and overall average spectral efficiency(ASE)of distributed massive MIMO systems with CLD are derived based on the conditional probability density function of each user’s approximate effective signal-to-noise ratio(SNR)and the switching thresholds under the target packet loss rate(PLR)*** these results,using the approximation of complementary error functions,the approximate APER and overall ASE are also deduced. Simulation results illustrate that the obtained theoretical ASE and APER can match the corresponding simulations well. Besides,the target PLR requirement is satisfied,and the distributed massive MIMO systems offer an obvious performance gain over the co-located massive MIMO systems.

摘要：This paper presents the design of a low power LNA with second stage that uses a notch filter for DS-UWB application. The LNA employs a current reuse structure to reduce the power consumption and an active second order notch filter to produce band rejection in the 5 - 6 GHz frequency band. The input reflection coefficient S11 and output reflection S22 are both less than –10 dB. The maximum power gain S21 is 15 dB while the maximum rejection ratio is over –10 dB at 4.8 GHz. The minimum noise figure is 5 dB. The input referred third-order intercept point (IIP3) is –7 dBm at 6 GHz. The power consumption is 6.4 mW from a 1-V power supply.

摘要：The recent decade has witnessed an upsurge in the demands of intelligent and simplified Internet of Things(IoT)networks that provide ultra-low-power communication for numerous miniaturized *** the research community has paid great attention to wireless protocol designs for these networks,researchers are handicapped by the lack of an energy-efficient software-defined radio(SDR)platform for fast implementation and experimental *** SDRs perform well in battery-equipped systems,but fail to support miniaturized IoT devices with stringent hardware and power *** paper takes the first step toward designing an ultra-low-power SDR that satisfies the ultra-low-power or even battery-free requirements of intelligent and simplified IoT *** achieve this goal,the core technique is the effective integration ofµW-level backscatter in our SDR to sidestep power-hungry active radio frequency *** carefully develop a novel circuit design for efficient energy harvesting and power control,and devise a competent solution for eliminating the harmonic and mirror frequencies caused by backscatter *** evaluate the proposed SDR using different modulation schemes,and it achieves a high data rate of 100 kb/s with power consumption less than 200µW in the active mode and as low as 10µW in the sleep *** also conduct a case study of railway inspection using our platform,achieving 1 kb/s battery-free data delivery to the monitoring unmanned aerial vehicle at a distance of 50 m in a real-world environment,and provide two case studies on smart factories and logistic distribution to explore the application of our platform.

摘要：In 3D models retrieval, feature description and retrieval of non-rigid model face more complex problems due to the isometry transformation of itself. We introduce the hierarchical combination matching into the feature comparison, and build a map between the divided regions of two models, and then achieve accurate feature matching based on patch-by-patch, which successfully introduces the spatial information into feature matching. Verified by experiment, the 3D model retrieval method proposed in this paper based on hierarchical combination matching can make sure more accurate feature matching, so as to enhance the precision of retrieval.

摘要：Time–frequency electromagnetic data contain frequency and transient electromagnetic information and can be used to determine the apparent resistivity both in the frequency and time *** observation data contains three types of noise:the harmonics interference at 50 Hz,high-frequency random noise,and low-frequency *** use frequency-domain bandstop filtering to remove the harmonics interference noise,segmentation and extension median filtering,and fitting of fixed extremes in empirical mode decomposition to remove the high-frequency and low-frequency noise,respectively;furthermore,we base the selection of median filtering window size on the variance and skewness coefficient of the *** first remove the harmonics interference at 50 Hz,then the high-frequency noise,and finally the low-frequency *** test the proposed methodology by using theory and experiments,and we find that the three types of noises are removed,the phase and amplitude information of the signal are maintained,and high-quality waveforms are obtained in the time domain.

摘要：The production of high-quality eco-friendly quantum dots(QDs)is challenging because of the efficient yet elusive nonradiative recombination *** study examined the effects of cooling engineering on regulating the excited states to realize high-quality ZnSeTe core-shell *** presence of ultrafast hot-carrier trapping and band-edge carrier trapping is responsible for the poor emission efficiency in ZnSeTe *** above processes can be suppressed simultaneously by engineering the cooling process,and the underlying mechanisms are interrogated by combined electronic and spectroscopic *** engineered ZnSeTe QDs exhibited record-high efficiency(>90%)and stability that were comparable to those of the canonical CdSe *** on the achievement,the ZnSeTe QD-based white light-emitting diodes(WLEDs)showed excellent optical performance,including a high color-rendering index of 80 and an appropriate correlated color temperature of 7391 ***,the WLEDs could serve as light sources in ecofriendly visible light *** results highlight the feasibility of eco-friendly QDs for practical applications without environmental hazards.

摘要：Hydrogen sulphide(H2 S)is a common air pollutant,which is produced in various industry ***,it is of crucial importance to detect H2 S in real *** fluorescent sensors were reported aiming at detecting H2 S in solution;however,the fluorescence sensing of gaseous H2 S has not yet been *** this work,we utilized the post-functionalized fluorescent film,MIL-100(In)@Eu3+/Cu2+film,realizing fluorescence turn-on sensing of gaseous H2 S at room temperature for the first time with the limit of detection as low as 0.535 ppm,which is comparable to some reported fluorescent probes for S2-ions and semiconductor based gaseous H2 S *** sensor was designed due to the strong affinity of H2 S with Cu2+.With the formation of CuS,the"antenna effect"between the ligand and Eu3+recovered,resulting in the fluorescence turn-on of Eu3+***,we proposed a new method to realize multi-colour anti-counterfeiting patterns with lanthanide ions ink,taking advantage of the extraordinary smooth surface and uncoordinated carboxylate groups within the MIL-100(In)film.

摘要：Both bismuth and copper are non-toxic and earth-abundant elements suitable for lead-free halide perovskite-like photovoltaic devices. Here, we report a highly facile route for in-situ producing copper-bismuth-iodide(CuBiI4) thin films directly on ITO substrate at room temperature, by utilizing a Bi-Cu alloy layer as precursor. X-ray diffraction and transmission electron microscopy(TEM) results verified the formation of well crystallized CuBiI4 thin films with [222] orientation. The transient photovoltage(TPV) analysis revealed that the CuBiI4 is an n-type semiconductor with a suitable band gap of ~1.81 eV, preferable to photoelectric conversion compared with CH3NH3PbI3. It is very interesting that the subsequent spin-coating process of the classical Spiro-MeOTAD organic solution with TBP and acetonitrile resulted in a dense and smooth CuBiI4:SpiroMeOTAD bulk-heterojunction film. The preliminarily fabricated simple sandwich structures of ITO/CuBiI4:Spiro-MeOTAD/Au hybrid solar cell devices displayed efficient photovoltaic performance with the PCE up to 1.119% of the best sample. The room temperature direct metal surface elemental reaction(DMSER) method may provide a new insight for all-inorganic lead free perovskite-like AaBbXx compounds and high performance photovoltaic devices.

摘要：Non-rigid shape deformation without tearing or stretching is called isometry. There are many difficulties to research non-rigid shape in Euclidean space. Therefore, non-rigid shapes are firstly embedded into a none-Euclidean space. Spectral space is chosen in this paper. Then three descriptors are proposed based on three spectral distances. The existence of zero-eigenvalue has negative effects on computation of spectral distance, Therefore the spectral distance should be computed from the first non-zcro-eigenvalue. Experiments show that spectral distance distributions are very effective to describe the non-rigid shapes.

摘要：A piezoelectric pump with flexible valve has been developed to pump high viscosity cooling liquid in the nanosats thermal control system. The structure of the flexible valve is designed according to the characteristics of the human aortic shape with the aim to simulate the bionic pumping function of the human heart. Dynamic stress-strain features of the flexible valve are analyzed by the finite element method,and the results show that the proposed flexible valve is suitable and functional for the piezoelectric pump. Then the cylinder and diffuser/nozzle piezoelectric pumps based on flexible valves have been developed and fabricated. Experimental results of the output performance indicate that the maximum flow rate of the cylinder piezoelectric pump with flexible valve is 15.38 mL/min,170.77% higher than the diffuser/nozzle piezoelectric pump with flexible valve. The ability of the cylinder piezoelectric pump with flexible valve for transmitting high viscosity liquid has been validated. The piezoelectric pump with flexible valve has potential applications in the nanosats thermal control system.