摘要：The subthalamic nucleus(STN)is considered the best target for deep brain stimulation treatments of Parkinson’s disease(PD).It is difficult to localize the STN due to its small size and deep *** microelectrode arrays(MEAs)can rapidly and precisely locate the STN,which is important for precise *** this paper,16-channel MEAs modified with multiwalled carbon nanotube/poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)(MWCNT/PEDOT:PSS)nanocomposites were designed and fabricated,and the accurate and rapid identification of the STN in PD rats was performed using detection sites distributed at different brain *** results showed that nuclei in 6-hydroxydopamine hydrobromide(6-OHDA)-lesioned brains discharged more intensely than those in unlesioned *** addition,the MEA simultaneously acquired neural signals from both the STN and the upper or lower boundary nuclei of the ***,higher values of spike firing rate,spike amplitude,local field potential(LFP)power,and beta oscillations were detected in the STN of the 6-OHDA-lesioned brain,and may therefore be biomarkers of STN *** with the STNs of unlesioned brains,the power spectral density of spikes and LFPs synchronously decreased in the delta band and increased in the beta band of 6-OHDA-lesioned *** may be a cause of sleep and motor disorders associated with ***,this work describes a new cellular-level localization and detection method and provides a tool for future studies of deep brain nuclei.

摘要：The recent decade has witnessed an upsurge in the demands of intelligent and simplified Internet of Things(IoT)networks that provide ultra-low-power communication for numerous miniaturized *** the research community has paid great attention to wireless protocol designs for these networks,researchers are handicapped by the lack of an energy-efficient software-defined radio(SDR)platform for fast implementation and experimental *** SDRs perform well in battery-equipped systems,but fail to support miniaturized IoT devices with stringent hardware and power *** paper takes the first step toward designing an ultra-low-power SDR that satisfies the ultra-low-power or even battery-free requirements of intelligent and simplified IoT *** achieve this goal,the core technique is the effective integration ofµW-level backscatter in our SDR to sidestep power-hungry active radio frequency *** carefully develop a novel circuit design for efficient energy harvesting and power control,and devise a competent solution for eliminating the harmonic and mirror frequencies caused by backscatter *** evaluate the proposed SDR using different modulation schemes,and it achieves a high data rate of 100 kb/s with power consumption less than 200µW in the active mode and as low as 10µW in the sleep *** also conduct a case study of railway inspection using our platform,achieving 1 kb/s battery-free data delivery to the monitoring unmanned aerial vehicle at a distance of 50 m in a real-world environment,and provide two case studies on smart factories and logistic distribution to explore the application of our platform.

摘要：本研究进行了微带贴片天线线性阵列的优化设计。通过猫群算法(Cat swarm optimization,CSO)优化天线阵列辐射方向图的各控制参数。通过优化每个单元的激励电流权重和阵元间隙获得各向同性天线单元阵列的最佳辐射方向图。以12、16和20单元的天线阵列为例,运用MATLAB进行阵列优化设计,采用CST-MWS对设计结果进行仿真验证。由仿真结果可见,CSO能给出微带贴片天线线性阵列的最优设计。

摘要：To obtain the peak response at 532nm, narrow-band response GaA1As photocathodes with two GaAIAs ac- tive layers of different aluminum compositions are designed in consideration of the maximum absorptivity and quantum efficiency. The transmission-mode and the corresponding reflective-mode photocathodes are grown by metalorganic chemical vapor deposition. The results indicate that the peak response and the cut-off wavelength occur at 532nm for the two kinds of photocathodes respectively. The response of the reflection-mode photoeath- ode is an order of magnitude higher than that of the transmission-mode photocathode, whereas the better growth quality and the thicker second GaAIAs active layer can improve the transmission-mode response.

摘要：增材制造技术凭借其生产几何复杂结构(如晶格结构)的能力而广受欢迎.在航天航空和汽车领域轻量化设计中,晶格结构具有极大的优势.众所周知,振动问题是航天航空结构设计广泛关注的问题之一,为了避免结构动力破坏,有必要开展结构振动频率研究,尤其是结构自振频率研究.本文针对一阶频率最大化问题,提出了一种维诺梯度随机晶格结构多尺度优化设计方法.首先,在微观尺度上进行了维诺随机晶格微观结构生成和分析.然后,采用无惩罚密度法进行宏观结构优化.最后,基于得到的相对密度分布和映射关系,重构了全尺度维诺梯度随机晶格结构.数值算例验证了该方法在维诺梯度随机晶格结构设计中的正确性和有效性,振动试验也验证了所提出的多尺度方法的有效性和优化的梯度晶格结构在结构动力响应方面的优势.

摘要：The use of a reconfigurable intelligent surface(RIS)in the enhancement of the rate performance is considered to involve the limitation of the RIS being a passive *** address this issue,we propose a RIS-aided amplify-and-forward(AF)relay network in this *** jointly optimizing the beamforming matrix at AF relay and the phase-shift matrices at RIS,two schemes are put forward to address a maximizing signal-to-noise ratio(SNR)***,aiming at achieving a high rate,a high-performance alternating optimization(AO)method based on Charnes–Cooper transformation and semidefinite programming(CCT-SDP)is proposed,where the optimization problem is decomposed into three subproblems solved using CCT-SDP,and rank-one solutions can be recovered using Gaussian ***,the optimization variables in the CCT-SDP method are matrices,leading to extremely high *** reduce the complexity,a low-complexity AO scheme based on Dinkelbachs transformation and successive convex approximation(DT-SCA)is proposed,where the variables are represented in vector form,and the three decoupling subproblems are solved using *** results verify that compared to three benchmarks(i.e.,a RIS-assisted AF relay network with random phase,an AF relay network without RIS,and a RIS-aided network without AF relay),the proposed CCT-SDP and DT-SCA schemes can harvest better rate ***,it is revealed that the rate of the low-complexity DT-SCA method is close to that of the CCT-SDP method.

摘要：For the first time, we have introduced a novel GaN based resonant tunneling high electron mobility transistor （RTHEMT） on a silicon substrate. A monolithically integrated GaN based inverted high electron mobility transistor （HEMT） and a resonant tunneling diode （RTD） are designed and simulated using the ATLAS simulator and MATLAB in this study. The 10% Al composition in the barrier layer of the GaN based RTD structure provides a peak-to-valtey current ratio of 2.66 which controls the GaN based HEMT performance. Thus the results indicate an improvement in the current-voltage characteristics of the RTHEMT by controlling the gate voltage in this structure. The introduction of silicon as a substrate is a unique step taken by us for this type of RTHEMT structure.

摘要：In this paper,we study cross-layer scheduling scheme on multimedia application which considers both streaming traffic and data traffic over cognitive ad hoc networks.A cross-layer design is proposed to optimize SU's utility,which is used as an approach to balance the transmission efficiency and heterogeneous traffic in cognitive ad hoc networks.A framework is provided for utility-based optimal subcarrier assignment,power allocation strategy and corresponding modulation scheme,subject to the interference threshold to primary user(PU) and total transmit power *** learning is adopted in subcarrier allocation strategy to avoid collision and alleviate the burden of information exchange on limited common control channel(CCC).In addition,the M/G/l queuing model is also introduced to analyze the expected delay of streaming *** results are given to demonstrate that the proposed scheme significantly reduces the blocking probability and outperforms the mentioned single-channel dynamic resource scheduling by almost 8%in term of system utility.

摘要：In this work, power efficient butterfly unit based FFT architecture is presented. The butterfly unit is designed using floating-point fused arithmetic units. The fused arithmetic units include two-term dot product unit and add-subtract unit. In these arithmetic units, operations are performed over complex data values. A modified fused floating-point two-term dot product and an enhanced model for the Radix-4 FFT butterfly unit are proposed. The modified fused two-term dot product is designed using Radix-16 booth multiplier. Radix-16 booth multiplier will reduce the switching activities compared to Radix-8 booth multiplier in existing system and also will reduce the area required. The proposed architecture is implemented efficiently for Radix-4 decimation in time(DIT) FFT butterfly with the two floating-point fused arithmetic units. The proposed enhanced architecture is synthesized, implemented, placed and routed on a FPGA device using Xilinx ISE tool. It is observed that the Radix-4 DIT fused floating-point FFT butterfly requires 50.17% less space and 12.16% reduced power compared to the existing methods and the proposed enhanced model requires 49.82% less space on the FPGA device compared to the proposed design. Also, reduced power consumption is addressed by utilizing the reusability technique, which results in 11.42% of power reduction of the enhanced model compared to the proposed design.

摘要：In order to achieve an access to strain sensor data with wireless transmission in bridge engineering structure testing, a wireless strain test system is presented based on the resistance strain sensor of networks. The wireless bridge strain test system composed of master station and substation adopts the wireless method to realize the high accuracy data acquisition between the master station and the substation under a reliable communication protocol. The system has been tested in contrast with the present strain apparatus. Results show that the wireless system is high-reliable, and has many characteristics such as high efficiency, good precision, high stability with low cost, and good flexibility, without using the present communication network.