摘要：With the development of free electron laser （FEL） and the international linear collider （ILC）, the electron bunch length is getting smaller and smaller, The traveling-wave transverse RF deflecting structure is an important part of the RF deflecting method for bunch length measurement and phase space diagnostics. The operation mode in RF deflector is the ＂TM11-like＂ mode. Since the TM11-like mode in this structure has a pair of degenerate dipole modes, two additional holes are provided on either side of each iris to stabilize the mode. The simulation and optimization have been done. A prototype has been fabricated and tested. The cold test results have been compared with the simulations of the first three modes.

摘要：A prototype of a two-dimensional position sensitive X-ray detector was designed and constructed for small angle X-ray scattering experiments at BSFR （Beijing Synchrotron Radiation Facility）. The detector is based on MWPC with cathode strip readout, and has a sensitive area of 200 mm×200 mm. The spatial resolution （FWHM） of about 210 μm along the anode wire direction was obtained from the ^55Fe X-ray test of the detector.

摘要：A design for an efficient monochromatic electron source for Inverse Photoemission Spectroscopy （IPES） apparatus is described. The electron source consists of a BaO cathode, a focus electrostatic lens, a hemispherical deflection monochromator （HDM）, and a transfer electrostatic lens. The HDM adopts a “slit-in and slit-out” structure and the degradation of first-order focusing is corrected by two electrodes between the two hemispheres, which has been investigated by both analytical methods and electron-ray tracing simulations using the SIMION program. Through the focus lens, the HDM, and the standard five-element transfer lens, an optimal energy resolution is estimated to be about 53 MeV with a beam flux of 27 μA. Pass energy （P.E.） of 10 eV and 5 eV are discussed, respectively.

摘要：XAL is a high level accelerator application framework that was originally developed by tile Spallation Neutron Source （SNS）, Oak Ridge National Laboratory. It has an advanced design concept and has been adopted by many international accelerator laboratories. Adopting XAL for ADS is a key subject in the long term. This paper will present the modifications to tile original XAL applications for ADS. The work includes a proper relational database schema modification in order to better suit the requirements of ADS configuration data, redesigning and re-implementing db2xal application, and modifying the virtual accelerator application. In addition, the new device types and new device attributes for ADS online modeling purpose are also described here.

摘要：ANL （Argonne National Laboratory） and the National Science Center ＂Kharkov institute of physics Technology＂ （NSC KIPT, Kharkov, Ukraine） jointly propose to design and build a 100 MeV/100 kW linear accelerator which will be used to drive the neutron source subcritical assembly. The linac has ahnost finished assembly in KIPT by a team from the institute of high energy physics （IHEP, Beijing, China）. The design and measurement result of the accelerating system of the linac will be described in this paper.

摘要：The Jiangmen Underground Neutrino Observatory（JUNO） detector is designed to determine the neutrino mass hierarchy and precisely measure oscillation parameters. The general purpose design also allows measurements of neutrinos from many terrestrial and non-terrestrial sources. The JUNO Event Data Model（EDM） plays a central role in the offline software system. It describes the event data entities through all processing stages for both simulated and collected data, and provides persistency via the input/output system. Also, the EDM is designed to enable flexible event handling such as event navigation, as well as the splitting of MC IBD signals and mixing of MC backgrounds. This paper describes the design, implementation and performance of the JUNO EDM.

摘要：Power couplers, used in China-ADS proton linac injector I, are required to transfer 6 kW RF power to the superconducting Spoke cavities. At present, first the two couplers of a coaxial design have been fabricated, which accomplished a high power test at IHEP. The test results indicated that couplers of this design are qualified to deliver 10 kW RF power in continuous travelling wave mode. This paper describes the coupler＇s room temperature test procedures and results and discusses the original high power test, which was terminated due to serious out-gassing and after some modifications. In the final test, the couplers smoothly exceeded the design power level.

摘要：A new generation of storage ring-based light sources, called diffraction-limited storage rings（DLSR）, with emittance approaching the diffraction limit for multi-ke V photons by using multi-bend achromat lattice, has attracted worldwide and extensive studies of several laboratories, and been seriously considered as a means of upgrading existing facilities in the imminent future. Among various DLSR proposals, the PEPX design demonstrated that it is feasible to achieve sufficient ring acceptance for off-axis injection in a DLSR, by designing the lattice based on the ‘thirdorder achromat’ concept and with a special high-beta injection section. For the high energy Photon Source（HEPS）planned to be built in Beijing, a PEPX-type lattice has been designed and continuously improved. In this paper, we report the evolution of the PEPX-type design for HEPS, and discuss the main issues relevant to the linear optics design and nonlinear optimization.

摘要：The Compact Linear Collider （CLIC） is a future e＋e linear collider. The CLIC study concentrated on a design of center-of-mass energy of 3 TeV and demonstrated the feasibility of the technology. However, the physics also demands lower energy collision. To satisfy this, CLIC can be built in stages. The actual stages will depend on LHC results. Some specific scenarios of staged constructions have been shown in CLIC Concept Design Report （CDR）. In this paper, we concentrate on the main linac lattice design for Ecm=l TeV CLIC aiming to upgrade from E~.,=500 GeV CLIC and then to Ecru=3 TeV one. This main linac accelerates the electron or positron beam froth 9 GeV to 500 GeV. A primary lattice design based on the 3 TeV CLIC main linac design and its optimization based on the beam dynamics study will be presented. As we use the same design principles as 3TeV CLIC main linac, this optimization is basically identical to the 3 TeV one. All the simulations results are obtained using the tracking code PLACET.

摘要：A spoke cavity is a TEM-class superconducting resonator with particular advantages： compact structure and high shunt impedance. The 325 MHz β=0.40 （β=v/c, v is the velocity of particle and c is the velocity of light） single spoke cavity （Spoke040） is adopted for the Chinese ADS （Accelerator Driven Sub-critical System） project. The physics and mechanical design has been accomplished, and the fabrication of a prototype is currently in progress. In this paper, the optimization processes for the main radio frequency （RF） and mechanical parameters are analyzed in detail. Two kinds of cavity end-walls （flat and convex） are compared. The convex end-wall is preferred in order to improve mechanical performance of the cavity. Two and should be finished in early 2014. Vertical testing prototypes of the Spoke040 cavity are in the machining stage is also under preparation.