摘要：A pseudo-dynamic testing program was generated on a fabricated composite frame with steel plate shear walls （SPSWs） to study its seismic perlbrmance. The specimen was a three-storey single-bay frame, which was composed of H- section steel columns and composite beams, and was assembled by bolted height-adjustable steel beam-to-column connections （BHA connections）. Beam-only-connected SPSWs were selected as lateral load resisting members. The specimen was subjected to four ground motions of progressively increasing intensity. The results showed that： （1） beam-only-connected S PSWs provided sufficient lateral load resistance, lateral stiffness, and energy dissipation capacity to the fabricated frame via the tension ficld action developed in their infill panels; （2） the fabricated frame, assembled by BHA connections, exhibited substantial redundancy and good ductility; （3） an undesirable failure mode of the fabricated frame, in huge earthquakes, included severe cracking in composite beams and block shear failure in SPSWs＇ connections; （4） the inter-storey shear force distribution determined by ASCE/SE1 7-10 was verified with experimental data.

摘要：Global failure mechanism, i.e., the strong-column weak-beam mechanism, can provide higher total energy dissipation capacity with less ductility demand on components than other failure modes, and results in a more uniform story drift distribution and higher resistance to earthquake loads at the system level. However, the current code-based elastic design method cannot guarantee the global failure mechanism of frame structures under severe earthquakes. In this paper, a simple, but practical design procedure is proposed to ensure the global failure mechanism of reinforced concrete(RC) frame structures by redesigning the columns using the column tree method(CTM). CTM considers the yield limit state of all beams and column bases. The code-based design is firstly carried out to determine the section information of all beams and base columns. Then, the internal force demands applied on the column tree can be derived. Lastly, the column moments, shear forces and axial forces are determined according to the free-body diagram of CTM to finish the column redesign. Two RC frame structures with 6 and 12 stories are illustrated to verify the design procedure. The analytical results demonstrate the proposed approach can realize the global failure mechanism.

摘要：Static and dynamic force performance of two types of space truss structures i.e. square pyramid space truss（SPST） and diagonal on square pyramid space truss（DSPST）, are studied to determine the effect of stiffness of their lower supporting members. A simplified model for the supporting columns and the equivalent spring mass system are presented. Furthermore, the feasibility of the simplified model is demonstrated through theoretical analysis and examples of comparative analysis of the simplified model with the entire model. Meanwhile, from the elastic analysis under frequently occurring earthquakes and elasto-plastic analysis under seldom occurring earthquakes subjected to TAFT and EL-Centro seismic oscillation it is shown that the simplified method can be encompassed in the results from the normal model. It also showed good agreement between the two methods, as well as greatly improved the computational efficiency. This study verified that the dynamic effect of the supporting structures was under considered in space truss design in the past. The method proposed in the paper has important significance for other space truss structures.

摘要：Due to the randomness of earthquake wave magnitude and direction, and the uncertain direction of strong axis and weak axis in the construction of engineering structures, the effect of the direction of ground motion on a structure are studied herein. Ground motion records usually contain three vertical ground motion data, which are obtained by sensors arranged in accordance with the EW （East -West） direction, NS （South- North） direction and perpendicular to the surface （z） direction, referring to the construction standard of seismic stations. The seismic records in the EW and NS directions are converted to Cartesian coordinates in accordance with the rotation of θ = 0°-180°, and consequently, a countless group of new ground motion time histories are obtained. Then, the characteristics of the ground motion time history and response spectrum of each group were studied, resulting in the following observations： （1） the peak and phase of ground motion are changed with the rotation of direction θ, so that the direction θ of the maximum peak ground motion can be determined; （2） response spectrum values of each group of ground motions change along with the direction θ, and their peak, predominant period and declining curve are also different as the changes occur; then, the angle θ in the direction of the maximum peak value or the widest predominant period can be determined; and （3） the seismic response of structures with different directions of ground motion inputs has been analyzed under the same earthquake record, and the results show the difference. For some ground motion records, such as the Taft seismic wave, these differences are significant. Next, the Lushan middle school gymnasium structure was analyzed and the calculation was checked using the proposed method, where the internal force of the upper space truss varied from 25% to 28%. The research results presented herein can be used for reference in choosing the ground motion when checking the actual damage to struct