摘要：The present paper proposes an optimization design method for the Doherty output matching network(OMN)using impedance–phase hybrid objective function constraints,which possesses the capability of enhancing the efficiency consistency of the Doherty power amplifier(DPA)using integrated enhancing reactance(IER)during the back-off power(BOP)*** calculating the desired reactance for an extended BOP range and combining it with the two-impedance matching method,the S-parameters of the OMN are ***,the impedance and phase constraints of the OMN are proposed to narrow the distribution range of the ***,a fragmenttype structure is employed in the OMN optimization so as to enhance the flexibility of the circuit optimization *** validate the proposed method,a 1.7–2.5 GHz symmetric DPA with a large BOP range was designed and *** results demonstrate that across the entire operating frequency band,the saturated output power is>44 dBm,and the efficiency ranges from 45%to 55%at a 9-dB BOP.

摘要：Lumbar degeneration leads to changes in geometry and density distribution of vertebrae,which could further influence the mechanical property and *** study aimed to quantitatively describe the variations in shape and density distribution for degenerated vertebrae by statistical models,and utilized the specific statistical shape model(SSM)/statistical appearance model(SAM)modes to assess compressive strength and fracture *** detailed SSM and SAM were developed based on the 75 L1 vertebrae of elderly men,and their variations in shape and density distribution were quantified with principal component(PC)*** vertebrae were classified into mild(n=22),moderate(n=29),and severe(n=24)groups according to the overall degree of *** computed tomography-based finite element analysis was used to calculate compressive strength for each L1 vertebra,and the associations between compressive strength and PC modes were evaluated by multivariable linear regression(MLR).Moreover,the distributions of equivalent plastic strain(PEEQ)for the vertebrae assigned with the first modes of SSM and SAM at mean±3SD were *** Leave-One-Out analysis showed that our SSM and SAM had good performance,with mean absolute errors of 0.335±0.084 mm and 64.610±26.620 mg/cm3,respectively.A reasonable accuracy of bone strength prediction was achieved by using four PC modes(SSM 1,SAM 1,SAM 4,and SAM 5)to construct the MLR ***,the PEEQ values were more sensitive to degeneration-related variations of density distribution than those of *** density variations may change the deformity type(compression deformity or wedge deformity),which further affects the fracture *** models can identify the morphology and density variations in degenerative vertebrae,and the SSM/SAM modes could be used to assess compressive strength and fracture *** above findings have implications for assisting clinicians in pathological dia

摘要：Molybdenum-based catalysts have demonstrated significant potential in the electrocatalytic hydrogen evolution reaction(HER).However,the limited exposure of active sites and strong hydrogen adsorption result in suboptimal ***,a Mo_(2)N±MoSe_(2) heterojunction is prepared on carbon cloth(MNS/CC)to enhance the *** strong electronic interaction between Mo_(2)N and MoSe_(2),combined with the lower work function of Mo_(2)N,creates an intrinsic electric field at the heterojunction interface,which markedly improves charge transfer ***,the optimized electronic structure of Mo sites further enhances charge transfer and intrinsically catalytic activity in *** a result,MNS/CC requires overpotentials of mere 65 and 210 mV to achieve current densities of 20 mA cm^(−2) and 1 A cm^(−2),respectively,with a Tafel slope of only 96 mV dec−***,MNS/CC maintains stable operation at 1 A cm^(−2) for 240 h without significant *** results offer insights into the design of non-precious metal-based electrocatalysts for industrial hydrogen production.

摘要：The mechanical reliability and optimization theory on the method ofreliability-optimization design for the new roller orientation clutch is provided. The result ofreliability-optimization design is compared with the result of the conventional design method.

摘要：Experimental design was applied in the optimization of crude oil adsorption from saline waste water using raw *** application of response surface methodology(RSM) was presented with temperature,salinity of water,pH,adsorbent dose,and initial oil content as factors.A quadratic model could be used to approximate the mathematical relationship of crude oil removal on the five significant independent *** values and experimental values are found to be in good agreement with R2 of 97.44%.The result of optimization shows that the maximum crude oil removal is equal to 67.38% under the optimal condition of temperature of 46.53 °C,salinity of 37.2 g/L,pH of 3,adsorbent dose of 9 g/L and initial oil content of 300×10-6.

摘要：One of the challenges in construction of nearly and net ZEBs is how to truly achieve the nearly and net energy goals after building *** building design standards and practices are mostly based on design performance evaluation,but practices show that many designed nearly/net ZEBs failed to achieve the energy goals after building *** facilitate the practical achievement of nearly and net ZEBs,recently most of the newly-released ZEB design standards have turned to post-occupancy performance evaluation,posing great challenges to nearly and net ZEB ***,the detailed challenges have not be comprehensively investigated,and effective optimal design methods which can facilitate the achievement of nearly and net ZEBs under these standards are still *** this study,new challenges of nearly and net ZEB design under the post-occupancy performance-based design standards are fully investigated,and a risk-benefit based optimal design method is proposed to facilitate the achievement of nearly and net ZEBs under these *** newly-released ZEB standard in China is taken as an example to investigate the challenges and test the proposed *** show that nearly and net ZEBs designed using conventional design method have high risk in achieving energy goals under these standards due to high risk in satisfying the requirement regarding non-renewable primary energy consumption after building *** proposed design method is effective to facilitate achieving energy goals under these standards based on the risk that decision-makers would like to take.

摘要：Modal analysis and seismic response analysis were carried out for the equatorial diagnostic port plug of international thermonuclear experimental reactor (ITER). The aim of the theoretical analysis is to verify structural strength and reliability of the device. The working condition includes one-dimensional seismic wave and two-dimensional seismic wave. Modal analysis of the device shows that primary vibration is inclined to occur in low-order modes. The horizontal (X-direction, Y-direction) maximum vibration appears at the first and the fourth eigen modes, with the natural frequency of 70.59 and 215.88 Hz respectively, and the vertical (Z-direction) primary vibration appears at the second eigen mode with the natural frequency of 82.85 Hz. According to the results of the finite element analysis (FEA) program, the weak portions of the device are distributed in the joint of port body with blanket shielding module (BSM) and inner side wall of ribbed plate for lifting flange, the maximum von Mises stress is 14.8 MPa with the Y-direction seismic wave. In accordance with the design criteria, the destructive effect is far below the failure boundary, and the structural reliability of the equatorial diagnostic port plug can meet the requirements of the design specifications.

摘要：A facile design of Pt nanostructures from submonolayer to monolayer has been realized by ion adsorption-in situ electrochemical reduction on Au nanoparticles supported on multiwall carbon nanotubes （CNTs）. The as prepared Au@Pt/CNTs catalysts display coverage-specific electrocatalysis. Au@Pt/CNTs with low Pt coverage is inactive towards methanol oxidation whereas it oxidizes formic acid effectively through a direct pathway with mass specific activity 90 times that of a commercial Pt/C catalyst. Due to its inertness to methanol, it shows high performance in the oxygen reduction reaction （ORR） with high methanol tolerance. In contrast, simply increasing the Pt coverage to above 40% switches the formic acid oxidation process to both direct and indirect catalytic pathways, and also results in high methanol oxidation activity.

摘要：While it is known that mechanical dynamics are influential in neural differentiation for critical processes like neurogenesis or neurodegeneration, studies on neural stem cell therapies usually focus on biochemical interactions rather than mechanical aspects, frequently resulting in low efficacy and unfulfilled potential. Therefore, current studies are attempting to elucidate the effect of mechanical stimulus on neural performance using conventional two-dimensional(2D) planar substrates. Yet, these2D substrates fail to capture the defining three-dimensional(3D) characteristics of the in vivo neural stem cell *** complete this research gap, we synthesized a series of soft and elastic 3D hydrogels to mimic the neural tissue mechanical environment for 3D cell culture, using long-chain polyethylene glycol diacrylate(PEGDA) and gelatin-methacryloyl(Gel MA).By varying the concentration of the polymer, we obtained biomimicking hydrogels with a tensile modulus as low as 10 k Pa and a compressive modulus as low as 0.8 k Pa. The in vitro results demonstrated that Gel MA-PEGDA hydrogels have the high biocompatibility required to support neural cell growth, proliferation, and differentiation, as well as neurite outgrowth. We then studied the effect of mechanical stretching on the behaviors of neural cells and observed that mechanical stretching could significantly enhance neurite extension and axon elongation. In addition, the neurites were more directionally oriented to the stretching direction. Immunocytochemistry and relative gene expression data also suggested that mechanical tension could upregulate the expression of neural differentiation protein and genes, including GFAP and βIII-Tubulin. Overall, this study shows that in addition to the specific mechanical properties of Gel MA-PEGDA that improve neural differentiation towards specific lineages, hydrogel stretching is also a potentially attractive strategy to improve the therapeutic outcomes of neural stem cel

摘要：In this paper, we conduct research on curriculum system construction plan for animation design and production of specialty in high vocational colleges. With the development of animation industry in our country, the existing higher vocational anime education already cannot satisfy the needs of the enterprises. Anime professional teaching reform is imminent. This article stands on the basis of existing animation specialty teaching reform, the analysis summarizes common problems, and proposes the corresponding solution hope to make their efforts to the development of animation education. We insist on teachers in the teaching process, and in the case of the classroom into more comprehensive knowledge, to improve the students＇ technology at the same time, more to improve students＇ comprehensive qualities to look for the better education performance.