摘要：Autograft or metal implants are routinely used in skeletal ***,they fail to provide long-term clinical resolution,necessitating a functional biomimetic tissue engineering *** use of native human bone tissue for synthesizing a biomimeticmaterial inkfor three-dimensional(3D)bioprintingof skeletal tissueis anattractivestrategyfor ***,human bone extracellular matrix(bone-ECM)offers an exciting potential for the development of an appropriate microenvironment for human bone marrow stromal cells(HBMSCs)to proliferate and differentiate along the osteogenic *** this study,we engineered a novel material ink(LAB)by blending human bone-ECM(B)with nanoclay(L,Laponite®)and alginate(A)polymers using extrusion-based *** inclusion of the nanofiller and polymeric material increased the rheology,printability,and drug retention properties and,critically,the preservation of HBMSCs viability upon *** composite of human bone-ECM-based 3D constructs containing vascular endothelial growth factor(VEGF)enhanced vascularization after implantation in an ex vivo chick chorioallantoic membrane(CAM)*** inclusion of bone morphogenetic protein-2(BMP-2)with the HBMSCs further enhanced vascularization and mineralization after only seven *** study demonstrates the synergistic combination of nanoclay with biomimetic materials(alginate and bone-ECM)to support the formation of osteogenic tissue both in vitro and ex vivo and offers a promising novel 3D bioprinting approach to personalized skeletal tissue repair.

摘要：Short-range ordering(SRO)is one of the most important structural features of high entropy alloys(HEAs).However,the chemical and structural analyses of SROs are very difficult due to their small size,complexed compositions,and varied *** electron microscopy(TEM)as well as its aberration correction techniques are powerful for characterizing SROs in these compositionally complex *** this short communication,we summarized recent progresses regarding characterization of SROs using TEM in the field of *** using advanced TEM techniques,not only the existence of SROs was confirmed,but also the effect of SROs on the deformation mechanism was ***,the perspective related to application of TEM techniques in HEAs are also discussed.

摘要：Cortical electrodes are a powerful tool for the stimulation and/or recording of electrical activity in the nervous ***,the inevitable wound caused by surgical implantation of electrodes presents bacterial infection and inflammatory reaction risks associated with foreign body ***,inflammation of the wound area can dramatically worsen in response to bacterial *** consequences can not only lead to the failure of cortical electrode implantation but also threaten the lives of ***,we prepared a hydrogel made of bacterial cellulose(BC),a flexible substrate for cortical electrodes,and further loaded antibiotic tetracycline(TC)and the anti-inflammatory drug dexamethasone(DEX)onto *** encapsulated drugs can be released from the BC hydrogel and effectively inhibit the growth of Gram-negative and Gram-positive ***,therapeutic cortical electrodes were developed by integrating the drug-loaded BC hydrogel and nine-channel serpentine arrays;these were used to record electrocorticography(ECoG)signals in a rat *** to the controlled release of TC and DEX from the BC hydrogel substrate,therapeutic cortical electrodes can alleviate or prevent symptoms associated with the bacterial infection and inflammation of brain *** approach facilitates the development of drug delivery electrodes for resolving complications caused by implantable electrodes.

摘要：High-entropy alloys(HEAs)possess outstanding features such as corrosion resistance,irradiation resistance,and good mechan-ical properties.A few HEAs have found applications in the fields of aerospace and *** studies on the deformation mech-anisms of HEAs can guide microstructure control and toughness design,which is vital for understanding and studying state-of-the-art structural *** X-ray and neutron diffraction are necessary techniques for materials science research,especially for in situ coupling of physical/chemical fields and for resolving macro/microcrystallographic information on ***,several re-searchers have applied synchrotron X-ray and neutron diffraction methods to study the deformation mechanisms,phase transformations,stress behaviors,and in situ processes of HEAs,such as variable-temperature,high-pressure,and hydrogenation *** this review,the principles and development of synchrotron X-ray and neutron diffraction are presented,and their applications in the deformation mechanisms of HEAs are *** factors that influence the deformation mechanisms of HEAs are also *** review fo-cuses on the microstructures and micromechanical behaviors during tension/compression or creep/fatigue deformation and the application of synchrotron X-ray and neutron diffraction methods to the characterization of dislocations,stacking faults,twins,phases,and intergrain/interphase stress *** on future developments of synchrotron X-ray and neutron diffraction and on research directions on the deformation mechanisms of novel metals are discussed.

摘要：Ni/TiO_(2) catalyst is widely employed for photo-driven DRM reaction while the influence of crystal structure of TiO_(2) remains *** this work,the rutile/anatase ratio in supports was successfully controlled by varying the calcination temperature of anatase-TiO_(2).Structural characterizations revealed that a distinct TiO_(x) coating on the Ni nanoparticles(NPs)was evident for Ni/TiO_(2)-700 catalyst due to strong metal-support *** is observed that the TiOx overlayer gradually disappeared as the ratio of rutile/anatase increased,thereby enhancing the exposure of Ni active *** exposed Ni sites enhanced visible light absorption and boosted the dissociation capability of CH4,which led to the much elevated catalytic activity for Ni/TiO_(2)-950 in which rutile ***,the catalytic activity of solar-driven DRM reaction was significantly influenced by the rutile/anatase ***/TiO_(2)-950,characterized by a predominant rutile phase,exhibited the highest DRM reactivity,with remarkable H2 and CO production rates reaching as high as 87.4 and 220.2 mmol/(g·h),*** rates were approximately 257 and 130 times higher,respectively,compared to those obtained on Ni/TiO_(2)-700 with *** study suggests that the optimization of crystal structure of TiO_(2) support can effectively enhance the performance of photothermal DRM reaction.

摘要：具有强光学非线性和高稳定性的非线性光学(NLO)有机材料因其潜在的广泛应用而备受关注.本研究中,我们设计并系统地研究了具有超强二阶非线性光学响应的一种新型NLO查尔酮衍生物—1-(4-甲氧基苯基)-3-(4-乙氧基苯基)-2-丙烯基-1-酮(DMPO).合成得到的这种新设计的DMPO仅在5天内即可快速生长出尺寸为10×5×4 mm^(3)的DMPO单晶.这些DMPO晶体由中性有机分子组成,它们在较宽的波段600–1800 nm范围具有高透明性,还拥有适度的光学带隙(2.51 eV),并展现出卓越的抗潮解性能.重要的是,DMPO实测的二次谐波产生(SHG)响应高达基准材料4-(4-二甲氨基苯乙烯基)甲基吡啶对甲苯磺酸盐(DAST)的1.86倍,证实了DMPO具有优良的宏观二阶光学非线性性质.因此,DMPO是集多种优点于一身的一种有机NLO新材料,可广泛应用于NLO领域.

摘要：Melt extrusion-based additive manufacturing(ME-AM)is a promising technique to fabricate porous scaffolds for tissue engi-neering ***,most synthetic semicrystalline polymers do not possess the intrinsic biological activity required to control cell *** of biomolecules on polymeric surfaces of AM scaffolds enhances the bioactivity of a construct;however,there are limited strategies available to control the surface ***,we report a strategy to tune the surface density of bioactive groups by blending a low molecular weight poly(ε-caprolactone)5k(PCL5k)containing orthogonally reactive azide groups with an unfunctionalized high molecular weight PCL75k at different *** porous three-dimensional(3D)scaf-folds were then fabricated using a high weight percentage(75 wt.%)of the low molecular weight PCL *** a proof-of-concept test,we prepared films of three different mass ratios of low and high molecular weight polymers with a thermopress and reacted with an alkynated fluorescent model compound on the surface,yielding a density of 201-561 pmol/cm^(2).Subsequently,a bone morphogenetic protein 2(BMP-2)-derived peptide was grafted onto the films comprising different blend compositions,and the effect of peptide surface density on the osteogenic differentiation of human mesenchymal stromal cells(hMSCs)was *** two weeks of culturing in a basic medium,cells expressed higher levels of BMP receptor II(BMPRII)on films with the conjugated *** addition,we found that alkaline phosphatase activity was only significantly enhanced on films contain-ing the highest peptide density(i.e.,561 pmol/cm^(2)),indicating the importance of the surface *** together,these results emphasize that the density of surface peptides on cell differentiation must be considered at the cell-material ***,we have presented a viable strategy for ME-AM community that desires to tune the bulk and surface functionality via blending of(m

摘要：石墨炔(GYs)是一种新型碳同素异形体,由sp和sp^(2)杂化碳原子组成.其中,石墨双炔(GDY)是目前研究和关注度最广泛的材料.其独特的sp杂化、均匀的孔隙和高度共轭的结构带来了优良的电子、光学和力学特性,其被广泛应用于电子器件、储能和转换、催化、气体分离、海水淡化等领域.然而,GDY材料仍然面临着诸多挑战,包括高结晶GDY的合成和快速无损的表征方法.本文就高结晶度GDY的设计、合成和结构表征进行了综述.本文还描述了GDY在各个领域的应用,为高度均匀的单晶GDY材料带来新的机遇.

摘要：过渡金属氧化物具有丰富的功能性,但其错综复杂的内部自由度对相图绘制和结构设计提出了挑战.本文中,我们引入了描述相图物理起源的轨道能级序(ELO),并通过对La_(0.67)Sr_(0.33)MnO_(3)(LSMO)氧化物的研究证明了其在相图预测中的有效性.结合DFT计算和实验,我们构建了氧含量和应变关联的LSMO相图,结果表明LSMO结构稳定性与ELO密切相关.据此发现了一种由ELO演化而产生的四倍氧有序相.最后,我们提出了描述轨道分裂程度的轨道弹性定律,阐明了ELO演化的起源,助力功能氧化物的设计.这项研究拓宽了材料科学领域的性能调控手段,并为从轨道角度预测相图提供了思路.

摘要：This paper presents a systematic investigation and demonstration of a K-band circularly polarized liquidcrystal-based phased array(LCPA),including the design,over-the-air(OTA)in-array calibration,and experimental *** LCPA contains 16 phase-shifting radiating channels,each consisting of a circularly polarized stacked patch antenna and a liquid-crystal-based phase shifter(LCPS)based on a loaded differential line *** to its slow-wave properties,the LCPS exhibits a maximum phase-shifting range of more than 360°with a figure of merit of 78.3(°)·dB^(-1)based on a liquid crystal layer with a thickness of only 5μ***,an automatic OTA calibration based on a state ergodic method is proposed,which enables the extraction of the phase-voltage curve of every individual LCPA *** proposed LCPA is manufactured and characterized with a total profile of only 1.76 mm,experimentally demonstrating a scanned circularly polarized beam from-40°to+40°with a measured peak gain of 12.5 dBic and a scanning loss of less than 2.5 *** bandwidth of the LCPA,which satisfies the require-ments of port reflection(|S_(11)|)<-15 dB,an axial ratio(AR)<3 dB,beam squinting<3°,and a gain variation<2.2 dB,spans from 25.5 to 26.0 *** total efficiency is about 34%,which represents a new state of the *** use of the demonstrated low-profile LCPA to support circularly polarized scanning beams,along with the systematic design and calibration methodology,holds potential promise for a variety of millimeter-wave applications.