摘要：Physical unclonable function （PUF） makes use of the uncontrollable process variations during the production of IC to generate a unique signature for each IC. It has a wide application in security such as FPGA intellectual property （IP） protection, key generation and digital rights management. Ring oscillator （RO） PUF and Arbiter PUF are the most popular PUFs, but they are not specially designed for FPGA. RO PUF incurs high resource overhead while obtaining less challenge-response pairs, and requires ＂hard macros＂ to implement on FPGAs. The arbiter PUF brings low resource overhead, but its structure has big bias when it is mapped on FPGAs. Anderson PUF can address these weaknesses of current Arbiter and RO PUFs implemented on FPGAs. However, it cannot be directly implemented on the new generation 28 nm FPGAs. In order to address these problems, this paper designs and implements a delay-based PUF that uses two LUTs in an SLICEM to implement two 16-bit shift registers of the PUF, 2-to-1 multiplexers in the carry chain to implement the multiplexers of the PUF, and any one of the 8 flip-flops to latch 1-bit PUF signatures. The proposed delay-based PUF is completely realized on 28 nm commercial FPGAs, and the experimental results show its high uniqueness, reliability and reconfigurability. Moreover, we test the impact of aging on it, and the results show that the effect of aging on the proposed PUF is insignificant, with only 6% bit-flips. Finally, the prospects of the proposed PUF in the FPGA binding and volatile key generation are discussed.

摘要：The anchoring property of the substrate surface of liquid crystal cells plays an important role in display and nondisplay fields. This property directly affects the deformation of liquid crystal molecules to change the phase difference through liquid crystal cells. In this paper, a test method based on the alternating-current bridge is proposed to determine the capacitance of liquid crystal cells and thus measure the anchoring energy of the substrate surface. The anchoring energy can be obtained by comparing the capacitance-voltage curves of twisted nematic liquid crystal cells with different anchoring properties in experimental and theoretical results simulated on the basis of Frank elastic theory. Compared with the other methods to determine the anchoring energy, our proposed method requires a simple treatment of liquid crystal cells and allows easy and high-accuracy measurements, thereby expanding the test ideas on the performance parameters of liquid crystal devices.

摘要：根据沿着重复轴的一种新动态 linearization 技术，双阶段的最佳的反复的学习控制为非线性、非仿射的分离时间的系统被介绍。双阶段显示二个最佳的学习阶段分别地被设计反复地改进控制输入顺序和学习获得。主要特征是控制器设计和集中分析仅仅取决于动态系统的 I/O 数据。换句话说，没有知道系统的任何另外的知识，我们能容易选择控制参数。模拟学习沿着重复轴说明介绍方法的几何集中，在哪个马路的一个例子控制为它的内在的工程重要性是引人注目的交通反复的学习。

摘要：目的:提出一种适合永磁电机的冷却系统设计方案,降低电机本体温度。创新点:提出一种适合永磁电机热分析的CFD仿真模型。方法:采用计算流体动力学方法对包含冷却风扇的永磁电机进行空间三维热力学分析和优化设计。结论:本文提出并优化后的冷却风扇可有效降低永磁电机的最高和平均温度。

摘要：A simple and efficient design scheme of the continuous long slot leaky-wave antenna is developed. The key steps involved in the scheme are summarized. First, the cut-off frequencies of slot waveguides with different slot offsets are obtained by 3D finite-difference time-domain （FDTD） method, Second, the attenuation function a^a is estimated by the aperture distribution, and the attenuation function αrs is determined by the slot radiation. Finally, the attenuation function αrs is combined with the attenuation function αrs by the coefficient K. And an example in Ka band is presented. Moreover, the return loss of the E-plane Tee-junction （ET） and the radiation pattern of leaky-wave antenna are simulated. The scheme is verified by comparing with the experimental result.

摘要：Introduction Despite the numerous breakthroughs made in medical and biomedical technologies,biosensing underneath the skin without any associated pain still sounds like a dream yet to be *** invasive biosensors refer to functional or electronic sensors that can contact the interior environment of living organisms and their biological tissues,while the connected bulk devices remain on the surface of the biological objects[1].Minimally invasive biosensors are currently a key research area because they can not only meet the increasing technical demands to precisely detect biological activities inside biological objects,but also provide an ideal platform to externally incorporate complicated functionalities and electronic integration[2].The current development level of minimally invasive sensing still necessitates solving the constraints and bottlenecks in the three aspects of functionalities,sensitivity and biocompatibility[3].In this perspective,we select minimally invasive sensors as a representative research object with the aim to solve the limitations of current diabetes diagnosis and treatment approaches.

摘要：Herein,two asymmetric hexacyclic fused small molecule acceptors(SMAs),namely BP4F-HU and BP4F-UU,were *** elongated outside chains in the BP4F-UU molecule played a crucial role in optimizing the morphology of blend film,thereby improving charge mobility and reducing energy loss within the corresponding ***,the PM6:BP4F-UU device exhibited a higher open-circuit voltage(V_(oc))of 0.878 V compared to the PM6:BP4F-HU device with a V_(oc)of 0.863 ***,a new wide bandgap SMA named BTP-TA was designed and synthesized as the third component to the PM6:BP4F-UU host binary devices,which showed an ideal complementary absorption spectrum in PM6:BP4F-UU *** addition,BTP-TA can achieve efficient intermolecular energy transfer to BP4F-UU by fluorescence resonance energy transfer(FRET)pathway,due to the good overlap between the photoluminescence(PL)spectrum of BTP-TA and the absorption region of ***,ternary devices with 15wt%BTP-TA exhibits broader photon utilization,optimal blend morphology,and reduced charge recombination compared to the corresponding binary ***,PM6:BP4F-UU:BTP-TA ternary device achieved an optimal power conversion efficiency(PCE)of 17.83%with simultaneously increased V_(oc)of 0.905 V,short-circuit current density(J_(sc))of 26.14 mA/cm^(2),and fill factor(FF)of 75.38%.

摘要：Contact engineering is of critical importance for two-dimensional(2D)transition metal dichalcogenide(TMD)-based ***,there are only a few solutions to overcome this obstacle because of the complexity of the TMD-contact *** this work,we propose a novel method using a soft plasma treatment followed by the seamless deposition of a metal electrode to reduce the contact resistance of MoS_(2)field effect transistors(FETs).The treated FETs exhibit three times higher mobility than the control FETs without plasma *** soft plasma treatment can remove the facial sulfur atoms and expose the middle Mo atoms so that they come into direct contact with the metal electrode,thus greatly improving the contact ***-principles calculation is also performed to support the experimental *** potentially scalable strategy can be extended to the whole family of TMD based FETs to provide a possible route of device processsing technology for 2D device application.

摘要：In this paper, iterative learning control （ILC） design is studied for an iteration-varying tracking problem in which reference trajectories are generated by high-order internal models （HOLM）. An HOlM formulated as a polynomial operator between consecutive iterations describes the changes of desired trajectories in the iteration domain and makes the iterative learning problem become iteration varying. The classical ILC for tracking iteration-invariant reference trajectories, on the other hand, is a special case of HOlM where the polynomial renders to a unity coefficient or a special first-order internal model. By inserting the HOlM into P-type ILC, the tracking performance along the iteration axis is investigated for a class of continuous-time nonlinear systems. Time-weighted norm method is utilized to guarantee validity of proposed algorithm in a sense of data-driven control.