摘要：Conventional blood sampling for glucose detection is prone to cause pain and fails to continuously record glucose fluctuations in *** glucose monitoring based on implantable electrodes could induce pain and potential tissue inflammation,and the presence of reactive oxygen species(ROS)due to inflammationmay affect glucose *** technology is less invasive,yet microneedle adhesion with skin tissue is *** this work,we developed a microarrow sensor array(MASA),which provided enhanced skin surface adhesion and enabled simultaneous detection of glucose and H_(2)O_(2)(representative of ROS)in interstitial fluid in *** microarrows fabricated via laser micromachining were modified with functional coating and integrated into a patch of a three-dimensional(3D)microneedle *** to the arrow tip mechanically interlocking with the tissue,the microarrow array could better adhere to the skin surface after penetration into *** MASA was demonstrated to provide continuous in vivo monitoring of glucose and H_(2)O_(2) concentrations,with the detection of H_(2)O_(2) providing a valuable reference for assessing the inflammation ***,the MASA was integrated into a monitoring system using custom *** work provides a promising tool for the stable and reliable monitoring of blood glucose in diabetic patients.

摘要：Modern medicine is increasingly interested in advanced sensors to detect and analyze biochemical *** sensors based on potentiometric methods are a promising platform for monitoring physiological ions in biological *** semi-implantable devices are mainly based on single-parameter *** semi-implantable electrodes for multiparameter sensing have more restrictions on the electrode size due to biocompatibility considerations,but reducing the electrode surface area could potentially limit electrode *** study developed a semi-implantable device system comprising a multiplexed microfilament electrode cluster(MMEC)and a printed circuit board for real-time monitoring of intra-tissue K^(+),Ca^(2+),and Na^(+)*** electrode surface area was less important for the potentiometric sensing mechanism,suggesting the feasibility of using a tiny fiber-like electrode for potentiometric *** MMEC device exhibited a broad linear response(K^(+):2–32 mmol/L;Ca^(2+):0.5–4 mmol/L;Na^(+):10–160 mmol/L),high sensitivity(about 20–45 mV/decade),temporal stability(>2weeks),and good selectivity(>80%)for the above *** vitro detection and in vivo subcutaneous and brain experiment results showed that the MMEC system exhibits good multi-ion monitoring performance in several complex *** work provides a platform for the continuous real-time monitoring of ion fluctuations in different situations and has implications for developing smart sensors to monitor human health.

摘要：A combination of hydrogels and microfluidics allows the construction of biomimetic three-dimensional(3D)tissue models in vitro,which are also known as *** hydrogel patterningwith awell-controlled spatial distribution is typically achieved by embedding sophisticated microstructures to act as a ***,these physical barriers inevitably expose cells/tissues to a less physiologically relevant microenvironment than in vivo ***,we present a novel dissolvable temporary barrier(DTB)strategy that allows robust and flexible hydrogel patterning with great freedom of design and desirable flow stimuli for cellular *** key aspect of this approach is the patterning of a water-soluble rigid barrier as a guiding path for the hydrogel using stencil printing technology,followed by a barrier-free medium perfusion after the dissolution of the *** and multiple tissue compartments with different geometries can be established using either straight or curved DTB *** effectiveness of this strategy is further validated by generating a 3D vascular network through vasculogenesis and angiogenesis using a vascularized microtumor *** a new proof-of-concept in vasculature-on-a-chip,DTB enables seamless contact between the hydrogel and the culture medium in closed microdevices,which is an improved protocol for the fabrication ofmultiorgan ***,we expect it to serve as a promising paradigm for organ-on-a-chip devices for the development of tumor vascularization and drug evaluation in the future preclinical studies.

摘要：柔性可穿戴的紫外线探测器在个体紫外线暴露监测、智能仿生眼和军事领域受到广泛关注.然而,传统不可拉伸的材料和器件结构设计限制了设备在可动态变形的人体皮肤和非平面表面上的精确监测应用和稳定附着.在本研究中,我们提出了基于氧化铜/碳-水凝胶-氧化锌/碳的新型应变隔离异质结构的本征可拉伸(拉伸应变或弯曲高达150%)紫外线探测器,该探测器具有高灵敏度(开/关比为2100%)、高稳定性(大于4000次循环),以及快速响应和恢复时间(分别为1.5和4 s).值得注意的是,该探测器通过水凝胶桥在氧化铜/碳和氧化锌/碳电极之间引入的p-n结能带结构,以及离子导电水凝胶中I^(-)/I_(3)^(-)的电化学反应机制,显著提高了其载流子效率和紫外线响应强度.本文通过集成传感器与所设计的电路板,进一步开发了一种无线紫外线报警系统,用于紫外线强度超标警报.此外,本文还设计了一种光电传感器阵列,并将其用作视网膜假体,以实现对环境紫外线强度的实时监测和成像.本文基于水凝胶基异质结构为开发可穿戴、可拉伸的光电紫外线传感器单元和成像阵列提供了一种新的可行方法.

摘要：The H_(∞)control method is an effective approach for attenuating the effect of disturbances on practical systems, but it is difficult to obtain the H_(∞)controller due to the nonlinear Hamilton-Jacobi-Isaacs equation, even for linear systems. This study deals with the design of an H_(∞)controller for linear discrete-time systems. To solve the related game algebraic Riccati equation(GARE), a novel model-free minimax Q-learning method is developed, on the basis of an offline policy iteration algorithm, which is shown to be Newton’s method for solving the GARE. The proposed minimax Q-learning method, which employs off-policy reinforcement learning, learns the optimal control policies for the controller and the disturbance online, using only the state samples generated by the implemented behavior policies. Different from existing Q-learning methods, a novel gradient-based policy improvement scheme is proposed. We prove that the minimax Q-learning method converges to the saddle solution under initially admissible control policies and an appropriate positive learning rate, provided that certain persistence of excitation(PE)conditions are satisfied. In addition, the PE conditions can be easily met by choosing appropriate behavior policies containing certain excitation noises, without causing any excitation noise bias. In the simulation study, we apply the proposed minimax Q-learning method to design an H_(∞)load-frequency controller for an electrical power system generator that suffers from load disturbance, and the simulation results indicate that the obtained H_(∞)load-frequency controller has good disturbance rejection performance.

摘要：Introduction Despite the numerous breakthroughs made in medical and biomedical technologies,biosensing underneath the skin without any associated pain still sounds like a dream yet to be *** invasive biosensors refer to functional or electronic sensors that can contact the interior environment of living organisms and their biological tissues,while the connected bulk devices remain on the surface of the biological objects[1].Minimally invasive biosensors are currently a key research area because they can not only meet the increasing technical demands to precisely detect biological activities inside biological objects,but also provide an ideal platform to externally incorporate complicated functionalities and electronic integration[2].The current development level of minimally invasive sensing still necessitates solving the constraints and bottlenecks in the three aspects of functionalities,sensitivity and biocompatibility[3].In this perspective,we select minimally invasive sensors as a representative research object with the aim to solve the limitations of current diabetes diagnosis and treatment approaches.

摘要：In this paper, we focus on energy-efficient transceiver and relay beamforming design for multi-pair two-way relay system. The multi-antenna users and the multi-antenna relay are considered in this work. Different from the existing works, the proposed algorithm is energy-efficient which is more applicable to the future green network. It considers both the sum-MSE problem and the power consumption problem for the users under the relay power constraint. Based on the optimal condition decomposition(OCD) method, the energy-efficient precoders at the users can be designed separately with limited information exchanged. The proposed relay beamforming algorithm is based on the alternative direction method of multipliers(ADMM) which has simpler iterative solution and enjoys good convergence. Simulation results demonstrate the performance of the proposed algorithms in terms of power consumption and MSE performance.

摘要：In order to improve the performance of arithmetic very large-scale integration （VLSI） sys- tem, a novel structure of quaternary logic gates is proposed based on multiple-valued current mode （MVCM） by using dynamic source-coupled logic （SCL）. Its key components, the comparator and the output generator are both based on differential-pair circuit （DPC）, and the latter is constructed by using the structure of DPC trees. The pre-charge evaluates logic style makes a steady current flow cut off, thereby greatly saving the power dissipation. The combination of multiple-valued source- coupled logic and differential-pair circuit makes it lower power consumption and more compact. The performance is evaluated by HSPICE simulation with 0.18 ~m CMOS technology. The power dissipa- tion, transistor numbers and delay are superior to corresponding binary CMOS implementation. Mul- tiple-valued logic will be the potential solution for the high performance arithmetic VLSI system in the future.

摘要：Double-weight optical code division multiple access（OCDMA） systems are proposed for studying differentiated quality-of-service transmission. Based on quadratic congruence code（QCC）, we construct a one-dimensional double-weight code family, which can be well utilized in incoherent synchronous double-weight OCDMA networks. By introducing algebraic transformation to code sequences of QCC in level 1, we obtain multiple double-weight codes with cross-correlation 1. Under the same-bit-power assumption, the performance of low-weight codes can be significantly improved and is always superior to that of high-weight codes in double-weight OCDMA systems with power control. This property is contrary to previous conclusions under the same-chip-power assumption.

摘要：Digital low-density parity-check(LDPC) decoders can hardly meet the power-limits brought by the new application scenarios. The analog LDPC decoder, which is an application of the analog computation technology, is considered to have the potential to address this issue to some extent. However, due to the lack of automation tools and analog stopping criteria, the analog LDPC decoders suffer from costly handcraft design and additional decoding delay, and are not feasible to practical applications. To address these issues, a decoder architecture using reusable building blocks is designed to lower the handcraft design, and a probability stopping criterion that is specially designed for analog decoder is further planned and implemented to reduce the decoding delay. Then, a(480,240) CMOS analog LDPC decoder is designed and fabricated in a 0.35-μm CMOS technology. Experimental results show that the decoder prototype can achieve 50 Mbps throughput when the power consumption is about 86.3m W, and the decoding delay can be reduced by at most 93% compared with using the preset maximum decoding delay in existing works.