摘要：Two 60Co-gamma radiation experiments were launched to explore the radiation effect on optical components and interferometric fiber optic gyroscope (IFOG). In optical components radiation experiment, the result showed that polarization-maintaining (PM) fiber coil loss was the most affected parameter in all the RWC (random walk coefficient) related parameters, compared with the weak sensitivity of other components parameters. In the IFOG radiation experiment, the RWC performance degradation was found to be almost due to an increase of the PM fiber attenuation. Based on the experiment result, a RWC prediction model in radiation, which is obtained by embedding PM fiber loss expression into the RWC model, was built following a power law of dose and dose rate. An IFOG RWC in space radiation environment was predicted from radiation dose and dose rate by the RWC prediction model. This RWC value calculated from test data is fully accorded to the RWC value predicted from radiation dose.

摘要：The suppression of combustion instabilities using the extremum seeking algorithm(ESA) is analyzed.A function model of the pressure oscillation and the mean fuel–air ratio in the combustion chamber is derived and implies an extremum relation between the oscillation amplitude of the pressure and the mean fuel–air ***, the control system of combustion instabilities can be considered as an extremum seeking control system(ESCS). All traditional ESCSs employ a separate design method, which divides the design of the ESA from the controller design. It is thus difficult for traditional ESCSs to achieve optimal performance of the control system. To solve this problem, an integrated extremum seeking control method for ESCSs is proposed. Using this integrated control, the minimal oscillation amplitude of the pressure is realized by adaptively seeking the optimal mean fuel–air ratio. Hence, this design method can effectively suppress combustion instabilities in aeroengines. By comparing simulation results, the effectiveness of the proposed method is validated.

摘要：Introduction Despite the numerous breakthroughs made in medical and biomedical technologies,biosensing underneath the skin without any associated pain still sounds like a dream yet to be *** invasive biosensors refer to functional or electronic sensors that can contact the interior environment of living organisms and their biological tissues,while the connected bulk devices remain on the surface of the biological objects[1].Minimally invasive biosensors are currently a key research area because they can not only meet the increasing technical demands to precisely detect biological activities inside biological objects,but also provide an ideal platform to externally incorporate complicated functionalities and electronic integration[2].The current development level of minimally invasive sensing still necessitates solving the constraints and bottlenecks in the three aspects of functionalities,sensitivity and biocompatibility[3].In this perspective,we select minimally invasive sensors as a representative research object with the aim to solve the limitations of current diabetes diagnosis and treatment approaches.

摘要：The analytical and finite element analyses of circular resonator for Resonant Pressure Sensor are presented. The new idea of this paper is the Silicon circular diaphragm used as the sensing resonator for micro pressure sensor. The thickness, radius and natural frequencies for the Si circular diaphragm are investigated. A system model is being developed to predict dynamic responses of the pressure sensor diaphragm and preliminary results are presented. The pressure range is 0-0.1Mpa. The resonant frequencies output of the homogenous circular diaphragm also realized by ANSYS software. The natural frequency of the resonator is about 63.418 kHz.

摘要：A real-time data compression wireless sensor network based on Lempel-Ziv-Welch encoding(LZW)algorithm is designed for the increasing data volume of terminal nodes when using ZigBee for long-distance wireless *** system consists of a terminal node,a router,a coordinator,and an upper *** terminal node is responsible for storing and sending the collected data after the LZW compression algorithm is compressed;The router is responsible for the relay of data in the wireless network;The coordinator is responsible for sending the received data to the upper *** terms of network function realization,the development and configuration of CC2530 chips on terminal nodes,router nodes,and coordinator nodes are completed using the Z-stack protocol stack,and the network is successfully *** the final simulation analysis and test verification,the system realizes the wireless acquisition and storage of remote data,and reduces the network occupancy rate through the data compression,which has a certain practical value and application prospects.

摘要：To test the pulse signal of initiating explosive device (IED) in an aircraft,a multi-channel equivalent system for IED based on Gigabit Ethernet transmission is designed according to its electrical parameters. The output voltage of multi-channel equivalent circuit is converted by analog-to-digital converter (ADC). Then the validity of the converted signal is judged by field programmable gate array (FPGA). Finally,it is transmitted the host computer through Gigabit Ethernet for waveform displaying. Compared with the traditional equivalent equipment of IED,the designed system here can not only test the validity of the pulse signal and normal operation of equivalent circuit,but also realize fast and reliable analysis of pulse signal by means of Gigabit Ethernet. It solves the problems of low speed and lag of response of traditional equivalent equipment.

摘要：The well-known marching cubes method is used to generate isosurfaces from volume data or data on a 3D rectilinear grid. To do so, it refers to a lookup table to decide on the possible configurations of the isosurface within a given cube, assuming we know whether each vertex lies inside or outside the surface. However, the vertex values alone do not uniquely determine how the isosurface may pass through the cube, and in particular how it cuts each face of the cube. Earlier lookup tables are deficient in various respects. The possible combinations of the different configurations of such ambiguous faces are used in this paper to find a complete and cor- rect lookup table. Isosurfaces generated using the new lookup table here are guaranteed to be watertight.

摘要：Modern medicine is increasingly interested in advanced sensors to detect and analyze biochemical *** sensors based on potentiometric methods are a promising platform for monitoring physiological ions in biological *** semi-implantable devices are mainly based on single-parameter *** semi-implantable electrodes for multiparameter sensing have more restrictions on the electrode size due to biocompatibility considerations,but reducing the electrode surface area could potentially limit electrode *** study developed a semi-implantable device system comprising a multiplexed microfilament electrode cluster(MMEC)and a printed circuit board for real-time monitoring of intra-tissue K^(+),Ca^(2+),and Na^(+)*** electrode surface area was less important for the potentiometric sensing mechanism,suggesting the feasibility of using a tiny fiber-like electrode for potentiometric *** MMEC device exhibited a broad linear response(K^(+):2–32 mmol/L;Ca^(2+):0.5–4 mmol/L;Na^(+):10–160 mmol/L),high sensitivity(about 20–45 mV/decade),temporal stability(>2weeks),and good selectivity(>80%)for the above *** vitro detection and in vivo subcutaneous and brain experiment results showed that the MMEC system exhibits good multi-ion monitoring performance in several complex *** work provides a platform for the continuous real-time monitoring of ion fluctuations in different situations and has implications for developing smart sensors to monitor human health.

摘要：In order to speed up and simplify the design of the quadrotor unmanned aerial vehicle(UAV)and carry out experimental simulation and verification of relevant control algorithms,this paper analyzed the system dynamics model of the mechanical structure and flight principle of the quadrotor aircraft,and used the Newton-Euler method to derive the non-linear dynamic *** at improving the modeling accuracy and system integrity of the quadrotor,the physical system modeling was combined with the CAD software and the Matlab/Simscape *** three-dimensional quadrotor solid model built by CAD software was imported into the Simscape simulation platform to construct the body and power system model of the *** on this,the control algorithm designed by Simulink was added to the simulation platform to facilitate the experiment verification and parameter *** simulation results show that the designed aircraft can achieve hover and tracking well and meet the control performance requirements of the system.

摘要：Both of planar and mesoporous architectures prevail for perovskite solar cells(PSCs).However,it is still an open question how the architecture affects the performance of *** inconsistent results in the references often create *** particular,the specific roles of mesoporous frameworks are yet to be well elaborated and require further *** this study,we carefully compared the properties of perovskite films and the device performances for both architectures to unravel the roles of mesoporous TiO2 framworks in CH3NH3PbI3 *** detailed characterizations of structural,microscopic,optical and electrical properties revealed that the presence of mesoporous TiO2 framework contributed to enlarged perovskite crystal sizes,enhanced light harvesting,efficient electron extration and suppressed charge *** a result,compared with the planar device,the mesoporous device yielded an improved power conversion efficiency of 18.18%,coupled with a reduced *** study reveals the benefits of mesoporous TiO2 framework in PSCs and provides the guidance for the design and optimization of architectures for high-performance devices.