摘要：Electrocardiogram(ECG)monitoring is used to diagnose cardiovascular diseases,for which wearable electronics have attracted much attention due to their lightweight,comfort,and long-term *** study developed a wearablemultilead ECG sensing system with on-skin stretchable and conductive silver(Ag)-coated fiber/silicone(AgCF-S)dry *** and normal adhesion to pigskin(0.43 and 0.20 N/cm2,respectively)was optimized by the active control of fiber density and mixing ratio,resulting in close contact in the electrode–skin *** breathableAgCF-S dry electrodewas nonallergenic after continuous fit for 24 h and can be reused/cleaned(>100 times)without loss of *** AgCF encapsulated inside silicone elastomers was overlapped to construct a dynamic network under repeated stretching(10%strain)and bending(90°)deformations,enabling small intrinsic impedance(0.3,0.1 Hz)and contact impedance variation(0.7 k)in high-frequency vibration(70 Hz).All hard/soft modules of the multilead ECG system were integrated into lightweight clothing and equipped with wireless transmission for signal *** synchronous acquisition of I–III,aVR,aVL,aVF,and V4 lead data,the multilead ECG sensing system was suitable for various scenarios,such as exercise,rest,and sleep,with extremely high signal-to-noise ratios.

摘要：A method for optimizing automotive doors under multiple criteria involving the side impact, stiffness, natural frequency, and structure weight is presented. Metamodeling technique is employed to construct approximations to replace the high computational simulation models. The approximating functions for stiffness and natural frequency are constructed using Taylor series approximation. Three popular approximation techniques,*** response surface (PRS), stepwise regression (SR), and Kriging are studied on their accuracy in the construction of side impact functions. Uniform design is employed to sample the design space of the door impact analysis. The optimization problem is solved by a multi-objective genetic algorithm. It is found that SR technique is superior to PRS and Kriging techniques in terms of accuracy in this study. The numerical results demonstrate that the method successfully generates a well-spread Pareto optimal set. From this Pareto optimal set, decision makers can select the most suitable design according to the vehicle program and its application.

摘要：Al Si10Mg porous protective structure often produces different damage forms under compressive loading,and these damage modes affect its protective *** order to well meet the service requirements,there is an urgent need to comprehensively understand the mechanical behavior and response mechanism of AlSi10Mg porous structures under compressive *** this paper,Al Si10Mg porous structures with three kinds of volume fractions are designed and optimized to meet the requirements of high-impact,strong-energy absorption,and lightweight *** mechanical behaviors of AlSi10Mg porous structures,including the stress-strain relationship,structural bearing state,deformation and damage modes,and energy absorption characteristics,were obtained through experimental studies at different loading *** damage pattern of the damage section indicates that AlSi10Mg porous structures have both ductile and brittle mechanical *** simulation studies show that the AlSi10Mg porous structure undergoes shear damage due to relative misalignment along the diagonal cross-section,and the damage location is almost at 45°to the load direction,which is the most direct cause of its structural damage,revealing the damage mechanism of AlSi10Mg porous structures under the compressive *** normalized energy absorption model constructed in the paper well interprets the energy absorption state of Al Si10Mg porous structures and gives the sensitive location of the structures,and the results of this paper provide important references for peers in structural design and optimization.

摘要：Additive manufacturing(AM)has revolutionized the design and manufacturing of patient-specific,three-dimensional(3D),complex porous structures known as scaffolds for tissue engineering *** use of advanced image acquisition techniques,image processing,and computer-aided design methods has enabled the precise design and additive manufacturing of anatomically correct and patient-specific implants and ***,these sophisticated techniques can be timeconsuming,labor-intensive,and ***,the necessary imaging and manufacturing equipment may not be readily available when urgent treatment is needed for trauma *** this study,a novel design and AM methods are proposed for the development of modular and customizable scaffold blocks that can be adapted to fit the bone defect area of a *** modular scaffold blocks can be combined to quickly form any patient-specific scaffold directly from two-dimensional(2D)medical images when the surgeon lacks access to a 3D printer or cannot wait for lengthy 3D imaging,modeling,and 3D printing during *** proposed method begins with developing a bone surface-modeling algorithm that reconstructs a model of the patient’s bone from 2D medical image measurements without the need for expensive 3D medical imaging or *** algorithm can generate both patient-specific and average bone ***,a biomimetic continuous path planning method is developed for the additive manufacturing of scaffolds,allowing porous scaffold blocks with the desired biomechanical properties to be manufactured directly from 2D data or *** algorithms are implemented,and the designed scaffold blocks are 3D printed using an extrusion-based AM *** and instructions are also provided to assist surgeons in assembling scaffold blocks for the self-repair of patient-specific large bone defects.

摘要：Recently,the increasing interest in wearable technology for personal healthcare and smart virtual/augmented reality applications has led to the development of facile fabrication *** have long been used to develop original solutions to such challenging technological problems due to their remote,sterile,rapid,and site-selective processing of *** this review,recent developments in relevant laser processes are summarized under two separate ***,transformative approaches,such as for laser-induced graphene,are *** addition to design optimization and the alteration of a native substrate,the latest advances under a transformative approach now enable more complex material compositions and multilayer device configurations through the simultaneous transformation of heterogeneous precursors,or the sequential addition of functional layers coupled with other electronic *** addition,the more conventional laser techniques,such as ablation,sintering,and synthesis,can still be used to enhance the functionality of an entire system through the expansion of applicable materials and the adoption of new ***,various wearable device components developed through the corresponding laser processes are discussed,with an emphasis on chemical/physical sensors and energy *** addition,special attention is given to applications that use multiple laser sources or processes,which lay the foundation for the all-laser fabrication of wearable devices.

摘要：Structural bionic design lacks mature and scientific theories, and the excellent structural characteristics of natural organisms sometimes cannot be transferred into engineering structures effectively. Aiming at overcoming the existing problems, this paper summarizes three related theories: similarity theory, fuzzy evaluation theory and optimization theory. Based on the related theories, a method of structural bionic design is introduced, which includes four steps: selecting the most useful structural characteristic of natural organism; analyzing the structural characteristic finally chosen for engineering problem; completing the structural bionic design for engineering structure; and verifying the structural bionic design. Similarity theory and fuzzy evaluation theory are employed to achieve Step 1. In Step 2 and Step 3, optimization theory is employed to analyze the parameters of structures. Together with the thoughts of simplification and grouping, optimization theory can reveal the relationship between organism structure and engineering structure, providing a way to structural bionic design. A general evaluation criterion is proposed in Step 4, which is feasible to evaluate the performance of different structures. Finally, based on the method, a structural bionic design of thin-walled cylindrical shell is introduced.

摘要：经典克拉尼图形(Chladni patterns,CP)是特征向量的视觉表示,在振动分析、乐器设计、粒子操纵和分离等领域中具有广泛的应用.均质结构通常会表现出高度规则化的CP,这限制它们的应用场景.因此,实现面向应用来逆向设计结构的CP是非常重要的,而这可以通过使用拓扑优化来实现CP的逆向设计.本研究提出了一种使用基于密度的拓扑优化算法来设计结构CP的方法.优化列式中,给出了描述图形的指标函数,并以最小化特征向量和目标CP之间的误差构建了优化目标.数值结果表明,所提出的方法可以为指定的单阶或多阶CP生成新颖的材料分布.这表明了本文所提出的方法能够实现CP的精确定制设计,进一步为面向应用的需求提供了更多选择.

摘要：Based on the building principle of additive manufacturing,printing orientation mainly determines the tribological properties of joint *** this study,we created a polyether-ether-ketone(PEEK)joint prosthesis using fused filament fabrication and investigated the effects of printing orientation on its tribological properties using a pin-on-plate tribometer in 25% newborn calf *** ultrahigh molecular weight polyethylene transfer film is formed on the surface of PEEK due to the mechanical capture of wear debris by the 3D-printed groove morphology,which is significantly impacted by the printing orientation of *** the printing orientation was parallel to the sliding direction of friction,the number and size of the transfer film increased due to higher steady *** transfer film protected the matrix and reduced the friction coefficient and wear rate of friction pairs by 39.13%and 74.33%,***,our findings provide a novel perspective regarding the role of printing orientation in designing knee prostheses,facilitating its practical applications.

摘要：When a curling rock slides on an ice sheet with an initial rotation,a lateral movement occurs,which is known as the curling *** force of friction between the curling rock and the ice sheet changes continually with changes in the environment;thus,the sport of curling requires great skill and *** throwing of the curling rock is a great challenge in robot design and control,and existing curling robots usually adopt a combination scheme of a wheel chassis and gripper that differs significantly from human throwing movements.A hexapod curling robot that imitates human kicking,sliding,pushing,and curling rock rotating was designed and manufactured by our group,and completed a perfect show during the Beijing 2022 Winter Olympics *** switching between the walking and throwing tasks is realized by the robot’s morphology transformation based on leg configuration *** robot’s controlling parameters,which include the kicking velocity v_(k),pushing velocity v_(p),orientation angle θc,and rotation velocityω,are determined by aiming and sliding models according to the estimated equivalent friction coefficientμ_(equ)and ratio e of the front and back *** stable errors between the target and actual stopping points converge to 0.2 and 1.105 m in the simulations and experiments,respectively,and the error shown in the experiments is close to that of a well-trained wheelchair curling *** robot holds promise for helping ice-makers rectify ice sheet friction or assisting in athlete training.

摘要：Water-coupled charge blasting is a promising technique to efficiently break rock *** this study,numerical models of double boreholes with water-coupled charge are established using LS-DYNA and are calibrated by the tests of rock masses subjected to explosion loads to examine its *** crack levels of rock mass induced by water-coupled charge blasting and air-coupled charge blasting are first *** is found that water-coupled charge blasting is more appropriate to fracture deep rock mass than air-coupled charge *** addition,the effects of rock properties,water-coupled charge coefficients,and borehole connection angles on the performance of water-coupled charge blasting are *** results show that rock properties and water-coupled charge coefficients can greatly influence the crack and fragmentation levels of rock mass induced by water-coupled charge blasting under uniform and non-uniform in-situ ***,changing borehole-connection angles can only affect crack and fragmentation levels of rock mass under non-uniform in-situ stresses but barely affect those under uniform in-situ stresses.A formula is finally proposed by considering the above-mentioned factors to provide the design suggestion of water-coupled charge blasting to fracture rock mass with different in-situ stresses.