摘要：Third generation semiconductors for piezotronics and piezo-phototronics,such as Zn O and Ga N,have both piezoelectric and semiconducting *** devices normally exhibit high strain sensitivity because strain-induced piezoelectric charges control or tune the carrier transport at junctions,contacts and *** distribution width of piezoelectric charges in a junction is one of important ***-voltage(C-V)characteristics can be used to estimate the distribution width of strain-induced piezoelectric *** metal–insulator-semiconductor(MIS)has been modelled by analytical solutions and numerical simulations in this paper,which can serve as guidance for C-V measurements and experimental designs of piezotronic devices.

摘要：Three-dimensional(3D)printing has attracted increasing research interest as an emerging manufacturing technology for devel-oping sophisticated and exquisite architecture through hierarchical *** has also been employed in various advanced industrial *** development of intelligent biomedical engineering has raised the requirements for 3D printing,such as flexible manufacturing processes and technologies,biocompatible constituents,and alternative ***,state-of-the-art 3D printing mainly involves inorganics or polymers and generally focuses on traditional industrial fields,thus severely limiting applications demanding biocompatibility and *** this regard,peptide architectonics,which are self-assembled by programmed amino acid sequences that can be flexibly functionalized,have shown promising potential as bioinspired inks for 3D ***,the combination of 3D printing and peptide self-assembly poten-tially opens up an alternative avenue of 3D bioprinting for diverse advanced ***,a small but innovative nation,has significantly contributed to 3D bioprinting in terms of scientific studies,marketization,and peptide architectonics,including modulations and applications,and ranks as a leading area in the 3D bioprinting *** review summarizes the recent progress in 3D bioprinting in Israel,focusing on scientific studies on printable components,soft devices,and tissue *** paper further delves into the manufacture of industrial products,such as artificial meats and bioinspired supramolecular architectures,and the mechanisms,physicochemical properties,and applications of peptide ***,Israel contributes significantly to the field of 3D bioprinting and should thus be appropriately recognized.

摘要：The sluggish kinetics of oxygen reduction reaction(ORR)hinders the commercialization of Zn‐air batteries(ZABs).Manipulating the electronic structure of electrocatalysts to optimize the adsorption energy of oxygen‐containing intermediates during the 4e–ORR offers a practical route toward improving ORR ***,we designed a novel ORR electrocatalyst containing Co single atoms and nanoparticles supported by carbon dots‐derived carbon nanoflowers(Co SAs/NPs CNF).Co SAs/NPs CNF possessed a very high ORR activity(E_(1/2) of the Co SAs/NPs CNF catalyst is 0.83 V(***)),and outstanding catalytic performance and stability when used as the air‐electrode catalyst in rechargeable ZABs(152.32 mW cm^(-2),1000.58 mWh gZn^(–1),and over 1300 cycles at a current density of 5 mA cm^(-2)).The Co SAs and Co NPs cooperated to improve electron and proton transfer processes during *** calculations revealed that the presence of adjacent Co NPs optimized the electronic structure of the isolated Co‐N_(4) sites,significantly lowering the energy barriers for the rate‐determining step in ORR(adsorption of*OOH)and thereby delivering outstanding ORR *** work reveals that the combination of supported single‐atom sites and metal nanoparticles can be highly beneficial for ORR electrocatalysis,outperforming catalysts containing only Co SAs or Co NPs.

摘要：Metallic glasses(MGs)have attracted great attention in wastewater treatment because of their high reactivity arising from amorphous structure,large residual stress and high density of low coordination ***,the reactivity of MGs would gradually slow down with time due to the passivation of active sites by corrosion products,resulting in limited long-term reactivity,which is also an unsolved key issue for established crystalline zero valent iron(ZVI)***,such problems are successfully overcome by introducing nanoscale chemical inhomogeneities in Fe-based MG(Fe-MGI),which apparently contributes to local galvanic cell effect and accelerates electron transfer during degradation *** importantly,the selective depletion of Fe0 causes local volume shrinkage and crack formation,leading to self-peeling of precipitated corrosion products and reacted *** fresh low coordination sites could be continuously provided,counteracting the mass transport and reactivity deteriorating ***,Fe-MGI demonstrates excellent long-term reactivity and self-refreshing properties even in neutral *** present results provide not only a new candidate but also a new route of designing ZVI materials for wastewater treatment.

摘要：带隙可调的钙钛矿材料在室内光伏(IPVs)领域具有广阔的应用前景.然而,与室内光相匹配的宽带隙钙钛矿通常导电性较差,缺陷密度较高,往往不利于电荷提取和传输,限制了其光伏特性.在这里,我们通过调节Br/I比,探究了不同带隙三阳离子钙钛矿的IPVs特性.研究表明,宽带隙钙钛矿能充分利用室内光,在低照度下能获得较高的开路电压,但高Br/I比的钙钛矿具有较高的缺陷密度,不利于获得高短路电流密度和填充因子.通过进一步研究不同带隙钙钛矿的结晶动力学、缺陷密度和电荷传输特性,我们发现主流观念中高效IPVs着重考虑室内光伏材料的带隙是不全面的,我们证明了通过适当降低宽带隙晶体中的Br含量可以获得室内光伏特性更优异的器件.也就是说,室内光伏晶体材料的制备需要兼顾带隙和电荷传输特性.在此工作中,平衡带隙和电荷传输的器件(Br 0.23,1.62 eV)在1035 lux的LED灯照射下取得了40.71%的最佳效率.我们的研究为高效室内光伏的设计提供了新思路.

摘要：Catalytic hydrodeoxygenation(HDO)is one of the most promising strategies to transform oxygen-rich biomass derivatives into high value-added chemicals and fuels,but highly challenging due to the lack of highly efficient nonprecious metal ***,we report for the first time of a facile synthetic approach to controllably fabricate well-defined Ni-Co alloy NPs confined on the tip of N-CNTs as HDO *** resultant Ni-Co alloy catalyst possesses outstanding HDO performance towards biomass-derived vanillin into 2-methoxy-4-methylphenol in water with 100%conversion efficiency and selectivity under mild reaction conditions,surpassing the reported high performance nonprecious HDO ***,our experimental results also unveil that the Ni-Co alloy catalyst can be generically applied to catalyze HDO of vanillin derivatives and other aromatic aldehydes in water with 100%conversion efficiency and over 90%***,our DFT calculations and experimental results confirm that the achieved outstanding HDO catalytic performance is due to the greatly promoted selective adsorption and activation of C=O,and desorption of the activated hydrogen species by the synergism of the alloyed Ni-Co *** findings of this work affords a new strategy to design and develop efficient transition metal-based catalysts for HDO reactions in water.

摘要：Atrial fibrillation is an “invisible killer” of human health. It often induces high-risk diseases, such as myocardial infarction, stroke, and heart failure. Fortunately, atrial fibrillation can be diagnosed and treated early. Low-level vagus nerve stimulation(LL-VNS) is a promising therapeutic method for atrial fibrillation. However, some fundamental challenges still need to be overcome in terms of flexibility,miniaturization, and long-term service of bioelectric stimulation devices. Here, we designed a closedloop self-powered LL-VNS system that can monitor the patient’s pulse wave status in real time and conduct stimulation impulses automatically during the development of atrial fibrillation. The implant is a hybrid nanogenerator(H-NG), which is flexible, light weight, and simple, even without electronic circuits,components, and batteries. The maximum output of the H-NG was 14.8 V and 17.8 μA(peak to peak). In the in vivo effect verification study, the atrial fibrillation duration significantly decreased by 90% after LLVNS therapy, and myocardial fibrosis and atrial connexin levels were effectively improved. Notably, the anti-inflammatory effect triggered by mediating the NF-κB and AP-1 pathways in our therapeutic system is observed. Overall, this implantable bioelectronic device is expected to be used for self-powerability,intelligentization, portability for management, and therapy of chronic diseases.