摘要：Conventional blood sampling for glucose detection is prone to cause pain and fails to continuously record glucose fluctuations in *** glucose monitoring based on implantable electrodes could induce pain and potential tissue inflammation,and the presence of reactive oxygen species(ROS)due to inflammationmay affect glucose *** technology is less invasive,yet microneedle adhesion with skin tissue is *** this work,we developed a microarrow sensor array(MASA),which provided enhanced skin surface adhesion and enabled simultaneous detection of glucose and H_(2)O_(2)(representative of ROS)in interstitial fluid in *** microarrows fabricated via laser micromachining were modified with functional coating and integrated into a patch of a three-dimensional(3D)microneedle *** to the arrow tip mechanically interlocking with the tissue,the microarrow array could better adhere to the skin surface after penetration into *** MASA was demonstrated to provide continuous in vivo monitoring of glucose and H_(2)O_(2) concentrations,with the detection of H_(2)O_(2) providing a valuable reference for assessing the inflammation ***,the MASA was integrated into a monitoring system using custom *** work provides a promising tool for the stable and reliable monitoring of blood glucose in diabetic patients.

摘要：Modern medicine is increasingly interested in advanced sensors to detect and analyze biochemical *** sensors based on potentiometric methods are a promising platform for monitoring physiological ions in biological *** semi-implantable devices are mainly based on single-parameter *** semi-implantable electrodes for multiparameter sensing have more restrictions on the electrode size due to biocompatibility considerations,but reducing the electrode surface area could potentially limit electrode *** study developed a semi-implantable device system comprising a multiplexed microfilament electrode cluster(MMEC)and a printed circuit board for real-time monitoring of intra-tissue K^(+),Ca^(2+),and Na^(+)*** electrode surface area was less important for the potentiometric sensing mechanism,suggesting the feasibility of using a tiny fiber-like electrode for potentiometric *** MMEC device exhibited a broad linear response(K^(+):2–32 mmol/L;Ca^(2+):0.5–4 mmol/L;Na^(+):10–160 mmol/L),high sensitivity(about 20–45 mV/decade),temporal stability(>2weeks),and good selectivity(>80%)for the above *** vitro detection and in vivo subcutaneous and brain experiment results showed that the MMEC system exhibits good multi-ion monitoring performance in several complex *** work provides a platform for the continuous real-time monitoring of ion fluctuations in different situations and has implications for developing smart sensors to monitor human health.

摘要：The growth of data and Internet of Things challenges traditional hardware,which encounters efficiency and power issues owing to separate functional units for sensors,memory,and *** this study,we designed an a-phase indium selenide(a-In_(2)Se_(3))transistor,which is a two-dimensional ferroelectric semiconductor as the channel material,to create artificial optic-neural and electro-neural synapses,enabling cutting-edge processing-in-sensor(PIS)and computing-in-memory(CIM)*** an optic-neural synapse for low-level sensory processing,the a-In_(2)Se_(3)transistor exhibits a high photoresponsivity(2855 A/W)and detectivity(2.91×10^(14)Jones),facilitating efficient feature *** high-level processing tasks as an electro-neural synapse,it offers a fast program/erase speed of 40 ns/50μs and ultralow energy consumption of 0.37 aJ/*** AI vision system using a-In_(2)Se_(3)transistors has been *** achieved an impressive recognition accuracy of 92.63%within 12 epochs owing to the synergistic combination of the PIS and CIM *** study demonstrates the potential of the a-In_(2)Se_(3)transistor in future vision hardware,enhancing processing,power efficiency,and AI applications.

摘要：柔性可穿戴的紫外线探测器在个体紫外线暴露监测、智能仿生眼和军事领域受到广泛关注.然而,传统不可拉伸的材料和器件结构设计限制了设备在可动态变形的人体皮肤和非平面表面上的精确监测应用和稳定附着.在本研究中,我们提出了基于氧化铜/碳-水凝胶-氧化锌/碳的新型应变隔离异质结构的本征可拉伸(拉伸应变或弯曲高达150%)紫外线探测器,该探测器具有高灵敏度(开/关比为2100%)、高稳定性(大于4000次循环),以及快速响应和恢复时间(分别为1.5和4 s).值得注意的是,该探测器通过水凝胶桥在氧化铜/碳和氧化锌/碳电极之间引入的p-n结能带结构,以及离子导电水凝胶中I^(-)/I_(3)^(-)的电化学反应机制,显著提高了其载流子效率和紫外线响应强度.本文通过集成传感器与所设计的电路板,进一步开发了一种无线紫外线报警系统,用于紫外线强度超标警报.此外,本文还设计了一种光电传感器阵列,并将其用作视网膜假体,以实现对环境紫外线强度的实时监测和成像.本文基于水凝胶基异质结构为开发可穿戴、可拉伸的光电紫外线传感器单元和成像阵列提供了一种新的可行方法.

摘要：We present the design of an electro-optic filter with polarization insensitivity based on a long period waveguide grating. The filter exhibits an ultra-large wavelength tuning range of exceeding 35 nm and covering the whole C band (1530 to 1565 nm) in a bias voltage range from ?84 to 84 V. In the whole tuning range, the transmission coefficients for quasi TE modes are over 97% and the 3 dB bandwidths are below 0.8 nm. The wavelength sensitivity to the tunable voltage is about 0.208 nm/V. This electro-optic filter can be used in dynamic WDM networks for fast wavelength scanning/selection, communication channel reconfiguration, and optical switching.

摘要：Introduction Despite the numerous breakthroughs made in medical and biomedical technologies,biosensing underneath the skin without any associated pain still sounds like a dream yet to be *** invasive biosensors refer to functional or electronic sensors that can contact the interior environment of living organisms and their biological tissues,while the connected bulk devices remain on the surface of the biological objects[1].Minimally invasive biosensors are currently a key research area because they can not only meet the increasing technical demands to precisely detect biological activities inside biological objects,but also provide an ideal platform to externally incorporate complicated functionalities and electronic integration[2].The current development level of minimally invasive sensing still necessitates solving the constraints and bottlenecks in the three aspects of functionalities,sensitivity and biocompatibility[3].In this perspective,we select minimally invasive sensors as a representative research object with the aim to solve the limitations of current diabetes diagnosis and treatment approaches.

摘要：A novel method to design Y-branch waveguides is proposed by using total internal reflection, and the optical properties areanalyzed. The simulated results show that the optical loss values of two Y-branch waveguides with the branching angles of12o and 30o are only 0.310 dB and 0.645 dB, respectively. Compared with conventional Y-branch waveguides, the opticalperformance of the proposed ones is well improved, which has many advantages such as wide angle, low loss, simplestructure and easy for fabrication.

摘要：In order to reduce transmission loss of the optical waveguide in Mach-Zehnder (M-Z) electro-optical (EO) polymer modulator,the basic iterative formula of semi-vector finite-difference beam propagation method (FD-BPM) is obtained from the scalar wave equation. The transition waveguide is combined with S-type bend branch waveguide for the M-Z EO modulator in the branch waveguide. The effects of structure parameters such as ridge width,length of the branch waveguide and interferometer spacing on the transmission loss are systematically studied by using the semi-vector FD-BPM method. The structure is optimized as an S-sine bend branch waveguide,with rib width w=7μm,length of branch waveguide L=1200μm and interferometer spacing G=22 μm. The results show that the optimized structure can reduce transmission loss to 0.083 dB,which have a certain reference value to the design of optical waveguide in M-Z polymer modulator.

摘要：The dispersion characteristics and transverse field distribution of the fundamental and higher order modes are analyzed for polymeric ridge multimode waveguide by a new technique which is based on the combination of the effective index method and the variational method. An algorithm is implemented to study the effect of the structure parameters and dimensions on the dispersion curves. The optical field distribution of the fundamental and higher order modes for TM modes are computed. The single mode conditions of polymeric ridge waveguide are obtained. The relationship between the curvature radius and the bending loss of S-shaped ridge waveguide are studied with wide-angle finite-difference beam propagation method and effective index method. The conclusion is: when the curvature radius is larger than 5000 μm, the bending loss will not decrease distinctly even if the curvature radius increases, and the light can propagate stably in the S-shaped ridge waveguide.

摘要：In this paper, the multimode waveguide lengths and the output port locations of a SOI (silicon on insulator) material-based 1x4 MMI (multimode interference) optical splitter are optimized by means of FD-BPM (finite difference - beam propaga- tion method). An improved 1x4 MMI optical splitter is designed. Compared with an usual optical splitter, a smaller loss 0. 12dB and a better output port power uniformity 0.11dB are achieved for the optical signal transmission.