摘要：In order to overcome the limitations of traditional microperforated plate with narrow sound absorption bandwidth and a single structure,two multi-cavity composite sound-absorbing materials were designed based on the shape of monoclinic crystals:uniaxial oblique structure(UOS)and biaxial oblique structure(BOS).Through finite element simulation and experimental research,the theoretical models of UOS and BOS were verified,and their sound absorption mechanisms were *** the same time,the influence of multi-cavity composites on sound absorption performance was analyzed based on the theoretical model,and the influence of structural parameters on sound absorption performance was *** research results show that,in the range of 100-2000 Hz,UOS has three sound absorption peaks and BOS has five sound absorption *** frequency range of the half-absorption bandwidth(α>0.5)of UOS and BOS increases by 242% and 229%,*** with traditional microperforated sound-absorbing structures,the series and parallel hybrid methods significantly increase the sound-absorbing bandwidth of the sound-absorbing *** research has guiding significance for noise control and has broad application prospects in the fields of transportation,construction,and mechanical design.

摘要：长大铁路隧道受特殊地质条件影响可采用分岔隧道建造。然而,列车高速穿越这种复杂构型的隧道时所引起的空气动力学效应尚不清楚。为此,本文采用三维、可压缩、非定常的雷诺时均模型,模拟研究了高速列车从不同方向通过分岔隧道时引起的气动效应。研究内容主要包括入口隧道结构为单线隧道(STE)和双线隧道(DTE)两个运行环境下的车体表面和隧道壁面的压力波动、列车气动力和周围流场特征等。研究结果表明,相比STE场景,DTE场景下车体表面和单线隧道壁面的压力峰峰值更大,并且气动阻力能耗也更大,头车的平均阻力增大19.2%。然而,STE场景下列车的侧向力波动更剧烈,其峰值相比DTE场景增加26%。本文的研究发现可为特殊铁路隧道的设计和建造提供有价值的空气动力学参考。

摘要：An investigation of the effect of simplifying bogie regions on the aerodynamic performance of a high-speed train was carried out by studying four train models,to explore possible ways to optimise the train underbody structure,improve the underbody aerodynamic performance,and reduce the aerodynamic *** shear stress transport(SST)k-ωturbulence model was used to study the airflow features of the high-speed train with different bogie regions at Re=2.25×10^(6).The calculated aerodynamic drag and surface pressure were compared with the experimental benchmark of wind tunnel *** results show that the SST k-ωmodel presents high accuracy in predicting the flow fields around the train,and the numerical results closely agree with the experimental *** with the train with simplified bogies,the aerodynamic drag of the train with a smooth surface and the train with enclosed bogie cavities/inter-carriage gaps decreases by 38.2%and 30.3%,respectively,while it increases by 10.8%for the train with cavities but no ***,enclosing bogie cavities shows a good capability of aerodynamic drag reduction for a new generation of highspeed trains.

摘要：This study investigates the influence of different pantograph parameters and train length on the aerodynamic drag of high-speed train by the delayed detached eddy simulation(DDES) method. The train geometry considered is the high-speed train with pantographs, and the different versions have 3, 5, 8, 10, 12, 16 and 17 cars. The numerical results are verified by the wind tunnel test with 3.6% difference. The influences of the number of cars and the position, quantity and configuration of pantographs on flow field around high-speed train and wake vortices are analyzed. The aerodynamic drag of middle cars gradually decreases along the flow direction. The aerodynamic drag of pantographs decreases with its backward shift, and that of the first pantograph decreases significantly. As the number of pantographs increases, its effect on the aerodynamic drag decrease of rear cars is more significant. The engineering application equation for the aerodynamic drag of high-speed train with pantographs is proposed. For the 10-car and 17-car train, the differences of total aerodynamic drag between the equation and the simulation results are 1.2% and 0.4%, respectively. The equation generalized in this study could well guide the design phase of high-speed train.

摘要：分段线性表示(PLR)技术目前已在多个领域被广泛用于重新表征高维的时间序列数据,以实现数据维度降低、波动过滤和整体趋势提取的目的。然而,该技术目前尚未在高速列车的隧道压力波数据的相关分析处理中得到应用。因此,本研究首次引入PLR技术对典型的高维列车压力波数据序列进行重新表征,并针对高速列车的压力波数据专门设计了一种基于感知重要点(PIP)且性能表现较好的PLR算法。研究结果表明,数据点重要性的度量方法和分段误差评估方法,特别是前者,对压力波序列的PIP的识别优先级甚至最终结果都会产生影响。与欧氏距离(ED)和正交距离(OD)相比,当将垂直距离(VD)作为数据点重要性的度量方法时,PLR_PIP算法(PLR_PIP_VD)获得了更合理的高速列车压力波的PLR结果。通过累积误差、平均误差和最大误差三种分段误差评估方法之间的对比,当将累积误差作为分段误差评估方法时,PLR_PIP_VD算法得到了相对较好的高速列车压力波的PLR结果。提出的适用于高速列车压力波PLR分析的PLR_PIP算法,为高速列车的压力波数据序列的分析处理提供了一种新的方法。

摘要：在建造长大海底隧道时,为了加固隧道结构并节省成本,通常会改变隧道部分区段的截面面积,这将导致隧道内的空气动力学特性发生变化。本文通过对比变截面(VCS)隧道和常规(CCS)隧道,研究了突变截面对长隧道内压力瞬变和列车风的影响。数值模拟采用RNG k-ε湍流模型,通过动模型试验进行了验证。结果表明,越接近突变截面VCS隧道和CCS隧道内的正峰值压力之间的差异越大,在5.43 km处达到最大值7.63%。在两种隧道之间纵向列车风的差异最高达18.7%,但在其他两个方向上几乎相同。此外,突变截面对隧道不同区域的影响不相同。本研究对长大变截面隧道的参数设计和隧道内附属设施的布置具有参考价值。

摘要：在列车撞击动力学中,简化的刚体模型被广泛应用于研究列车耐撞性,以及进一步优化列车在冲击载荷下的能量分布。然而忽略弹性波传播对列车耐撞性能的影响尚不清楚。为了解决这一问题,本文建立了简化的一维弹性车体模型,并研究了弹性波传播对列车能量耗散以及动力学特性的影响。基于经典的弹性波传播理论,提出了一种密度及弹性模量缩比准则,使一维弹性车体的运动特性与其横截面积无关。讨论了弹性波传播速度对不同冲击速度下三节编组列车在冲击工况下的能量吸收、弹性能储存以及车体最终的等效平衡速度的影响。研究发现,当弹性波的传播速度约为3500 m/s时,一维弹性车体与实际列车模型的一致性最好。在初始冲击速度为10、15和20 m/s时,简化的一维弹性模型吸能量与实际列车模型相比误差仅为2.56%、1.84%和1.45%,而简化的刚性模型能量吸收量比实际列车模型高10.7%、12.4%和14.8%,刚性模型显著高估了列车的能量吸收量。我们的研究结果可以促进列车在碰撞条件下的耐撞性设计和优化。

摘要：受电弓区域是列车气动阻力的重要来源,其贡献率约为10%,是列车气动阻力的关键区域。因此,改善受电弓区压力分布成为减小列车气动阻力的潜在有效方法。基于鞘翅目昆虫的生物形态,提出了一种新型的仿生鞘翅目导流罩,将其安装在8节编组的高速列车受电弓区域,以实现该区域的空气流动平顺。建立了原始模型(模型Ⅰ)、带导流罩的受电弓Ⅰ(模型Ⅱ)、带导流罩的受电弓Ⅱ(模型Ⅲ)、带导流罩的受电弓Ⅰ和受电弓Ⅱ(模型Ⅳ)4个计算模型,探讨列车气动减阻机理,提高列车气动性能。结果表明,安装受电弓导流罩后,受在电弓区域的气动阻力显著减小。受电弓Ⅰ区域最大减阻达84.5%,受电弓Ⅱ区域最大减阻为25.0%。当受电弓Ⅰ区域和受电弓Ⅱ区域同时安装导流罩时,受电弓Ⅰ区和受电弓Ⅱ区总减阻可达49.6%。与没有导流罩的原始模型相比,受电弓区域的空气流动更顺畅,堵塞效应更小。但是,下游流速加快,冲击风挡区域,导致气动阻力增大。在受电弓Ⅰ区域或受电弓Ⅱ区域安装导流罩时,8节列车的总阻力分别降低了4.6%和1.8%,而在受电弓Ⅰ区域和受电弓Ⅱ区域同时安装导流罩时,列车的总阻力降低了6.3%。本文可为新一代高速列车的气动设计提供参考。