摘要：CoFe_(2)O_(4)has been widely used for electromagnetic wave absorption owing to its high Snoek limit,high anisotropy,and suitable saturation magnetization;however,its inherent shortcomings,including low dielectric loss,high density,and magnetic agglomeration,limit its application as an ideal *** study investigated a microstructure regulation strategy to mitigate the inherent disadvantages of pristine CoFe_(2)O_(4)synthesized via a sol–gel auto-combustion method.A series of CoFe_(2)O_(4)foams(S0.5,S1.0,and S1.5,corresponding to foams with citric acid(CA)-to-Fe(NO_(3))_(3)·9H_(2)O molar ratios of 0.5,1.0,and 1.5,respectively)with two-dimensional(2D)curved surfaces were obtained through the adjustment of CA-to-Fe^(3+)ratio,and the electromagnetic parameters were adjusted through morphology *** to the appropriate impedance matching and conductance loss provided by moderate complex permittivity,the effective absorption bandwidth(EAB)of S0.5 was as high as 7.3 GHz,exceeding those of most CoFe_(2)O_(4)-based ***,the EAB of S1.5 reached 5.0 GHz(8.9–13.9 GHz),covering most of the X band,owing to the intense polarization provided by lattice defects and the heterogeneous *** three-dimensional(3D)foam structure circumvented the high density and magnetic agglomeration issues of CoFe_(2)O_(4)nanoparticles,and the good conductivity of 2D curved surfaces could effectively elevate the complex permittivity to ameliorate the dielectric loss of pure CoFe_(2)O_(4).This study provides a novel idea for the theoretical design and practical production of lightweight and broadband pure ferrites.

摘要：In this work,a set of novel Cu2ZnSnS4/Bi2WO6(CZTS/BWO)two-dimensional(2 D)/two-dimensional(2 D)type-Ⅱheterojunctions with different CZTS weight ratios(1%,2%,and 5%)were successfully synthesized via a brief secondary solvothermal *** successful formation of the heterojunctions was affirmed by characterization methods such as X-ray photoelectron spectroscopy and high-resolution transmission electron *** photocatalytic activity results showed that the prepared CZTS/BWO heterojunctions had excellent photocatalytic behaviors for organic degradation,especially when the mass fraction of CZTS with respect to BWO in the composite was 2%.Moreover,the addition of hydrogen peroxide(H2O2)could further improve the dye and antibiotic degradation *** reinforced photocatalytic and photo-Fenton degradation performance were primarily attributable to the introduction of BWO,which afforded increased active sites,expanded the solar spectral response range,and accelerated the cycle of Cu(Ⅱ)/Cu(Ⅰ);after four cycling times,its catalytic activity did not decrease *** addition,reasonable hypotheses of the photocatalytic and photo-Fenton catalytic mechanisms were *** study is expected to provide a visual approach for designing a novel photo-Fenton catalyst to jointly utilize the photocatalytic and Fenton activities,which can be better applied to the purification of residual organics in wastewater.

摘要：Constructing bismuth oxyhalide solid solutions with a single homogeneous phase have intrigued the research community;however,a deeper understanding of the intrinsic origin for improved bulk-charge separation is still ***,a series of Bi_(24)O_(31)Cl_(x)Br_(10-x) solid solutions with the same structural characteristics were synthesized by crystal structure *** density functional theory calculation,Kelvin probe force microscopy,and zeta potential testing results,an enhanced internal electric field(IEF)intensity between[Bi_(24)O_(31)]and[X]layers was achieved by changing halogen types and *** greatly facilitated bulk-charge separation and transfer efficiency,which is significant for the degradation of phenolic organic *** to the enhanced IEF intensity,the charge carrier density of Bi_(24)O_(31)Cl_(4)Br_(6) was 33.1 and 4.7 times stronger than that of Bi_(24)O_(31)Cl_(10) and Bi_(24)O_(31)Br_(10),***,Bi24O31Cl4Br6 had an optimal photoactivity for the degradation of bisphenol A,which was 6.21 and 2.71 times higher than those of Bi_(24)O_(31)Cl_(10) and Bi_(24)O_(31)Br_(10),***,this study revealed the intrinsic mechanism of the solid solution strategy for photocatalytic performance enhancement with respect to an IEF.

摘要：The catalytic effect of electrode materials is one of the most crucial factors for achieving efficient electrochemical energy conversion and ***-based metal composites were widely synthesized and employed as electrode materials because of their inherited outstanding ***,electrode materials can provide a higher capacity than the anticipated values,even beyond the theoretical *** origin of the extra capacity has not yet been explained accurately,and its formation mechanism is still ***,we first summarized the current research progress and drawbacks in energy storage devices(ESDs),and elaborated the role of catalytic effect in enhancing the performance of ESDs as follows:promoting the evolution of the solid electrolyte interphase(SEI),accelerating the reversible conversion of discharge/charge products,and improving the conversion speed of the intermediate and the utilization rate of the active materials,thereby avoiding the shuttling ***,a particular focus was placed on the interaction between the catalytic effect and energy storage performance in order to highlight the efficacy and role of the catalytic *** hope that this review could provide innovative ideas for designing the electrode materials with an efficient catalytic effect for ESDs to promote the development of this research field.