摘要：Based on the height of back-filled materials, thickness of ore body, height of boundary pillar and dipping angle of ore body and water pressure, the safety factors of all the pillars are calculated with the limit equilibrium method. The calculation results present that the safety factors of pillars in Sections 19, 20, 24, 28 are less than 1.3, and those of unstable sections are identified preliminarily. Further, a numerical investigation in Sections 18, 20, 22, 24, 25 and 28 implemented with numerical code RFPA20 is employed to further validate the pillar performance and the stability of stopes. The numerical results show the pillars in Sections 18, 22 and 24 are stable and the designed pillar size is suitable. The width of the ore body near Section 28 averages 20 m, failure occurs in the left stope, but the boundary pillars near Section 28 maintain good performance. The pillars in Sections 20 and 25 are unstable which are mainly affected by the Faults F8 and F18. The existence of faults alters the stress distribution, failure mode and water inrush pathway. This work provides a meaningful standard for boundary pillar and stope design in a mine as it transitions from an open pit to underground.

摘要：Radon is a polluting and radioactive gas released by rock fracture. Shear fracture is widely developed in surrounding rock mass of deep engineering. Nevertheless, the correlation between radon release and the shear fracture is undefined. In this study, the intact Jinping marble and Baihetan basalt were adopted as samples. Based on radionuclide content analysis, the intrinsic characteristics of radon emission were analyzed. Then a direct shear testing system was designed to synchronously measure radon release during rock fracture. The direct shear tests were carried out under different normal stresses. The relationship between shear fracture process and cumulative radon concentration was explored. The results indicated that radon release varied with the increase of shear displacement under the same normal stress. The general pattern showed a slight increase and fell in the initial loading phase, then increased rapidly to the peak release approximately corresponding to the peak of shear stress, and finally decreased to a stable level with the development of shear displacement after sample failure. The initial and peak radon concentrations increased linearly with the increase of normal stress. The same trend was found in shear failure surface area and cumulative radon concentration according to the rise angle(RA) value-average frequency(AF) distribution.

摘要：薄煤层N00工法的提出,革新了传统的煤矿开采模式、关键技术与装备系统,并取得了成功应用。而新开采模式下的巷道围岩控制技术尚不完善,为实现薄煤层N00工法巷道顶板结构的安全稳定,考虑其工艺流程和顶板变形特点,将巷道划分为超前硐室、垮落成巷两个阶段。并基于Hoek-Brown非线性岩体强度破坏准则,确定了巷道顶板不同阶段的锚杆/索预紧力的计算公式,提出了巷道顶板锚杆/索预紧力及长度设计方法。此外,结合数值模拟研究了不同阶段巷道顶板锚杆/索支护作用机理及不同锚杆/索支护组合对围岩应力分布的影响,揭示了锚杆/索支护关键参数对顶板稳定性的影响机制。最后,综合理论与数值模拟分析结果,提出了分区补偿支护技术,确定了锚杆/索预紧力、长度及选材的设计原则,该技术在现场取得了良好的应用效果。