摘要：In the paper a linear combination of both the standard mixed formulation and the displacement one of the Reissner-Mindlin plate theory is used to enhance stability of the former and to remove ''locking'' of the later. For this new stabilized formulation, a unified approach to convergence analysis is presented for a wide spectrum of finite element spaces. As long as the rotation space is appropriately enriched, the formulation is convergent for the finite element spaces of sufficiently high order. Optimal-order error estimates with constants independent of the plate thickness are proved for the various lower order methods of this kind.

摘要：The effect of heat treatment on microstructure,equilibrium hydrogen sorption pressure and plateau slope of LaNi_(3.8)Al_(0.75)Mn_(0.45) alloy was investigated.X-ray diffraction(XRD)analysis indicates that annealed alloys have single phase and the same hexagonal structure as that of LaNi_(5) alloy(CaCu_(5) type,P6/mmm).The cell parameters of alloys fluctuate with the increasing annealing *** equilibrium hydrogen pressure and plateau slope are a parabola function with annealing temperature for LaNi_(3.8)Al_(0.75)Mn_(0.45) *** this relationship,an appropriate heat treatment temperature for LaNi_(3.8)Al_(0.75)Mn_(0.45) alloy is determined to about 1220-1230 K by mathematic simulation ***,the maximum hydrogen storage capacity of alloys does not affected by the annealing temperature.

摘要：The pressure to reduce solar energy costs encourages efforts to reduce the thickness of silicon wafers. Thus, the cell bowing problem associated with the use of thin wafers has become increasingly important, as it can lead to the cracking of cells and thus to high yield losses. In this paper, a systematic .approach for simulating the cell bowing induced by the firing process is presented. This approach consists of three processes： （1） the material properties are determined using a nanoidentation test; （2） the thicknesses of aluminum （AI） paste and silver （Ag） busbars and fingers are measured using scanning electron microscopy; （3） non-linear finite element analysis （FEA） is used for simulating the cell bowing induced by the firing process. As a result, the bowing obtained using FEA simulation agrees better with the experimental data than that using the bowing calculations suggested in literature. In addition, the total in-plane residual stress state in the wafer/cell due to the firing process can be determined using the FEA simulation. A detailed analysis of the firing-induced stress state in single crystalline silicon （sc-Si）, cast, and edge-defined film-fed growth （EFG） multi-crystalline silicon wafers of different thicknesses is presented. Based on this analysis, a simple residual stress calculation is developed to estimate the maximum in-plane principal stress in the wafers. It is also proposed that the metallization pattern, Ag busbars and fingers screen printed on the front of a solar cell, can be designed using this approach. A practical case ofa 3-busbar Si solar cell is presented.

摘要：Fast electron-hole recombination issues during titanium dioxide(TiO_(2))photocatalysis limit its application in preventing bacterial infection during bone defect *** this study,TiO_(2)@reduced graphene oxide(rGO)composites were synthesized using a hydrothermal method in which rGO,which possesses very high electrical conductivity,promotes the separation of photoelectron-hole pairs of TiO_(2),thus improving the efficiency of photocatalytic production of reactive oxygen species(ROS).Subsequently,TiO_(2)@rGO composites were introduced into poly-L-lactic acid(PLLA)to prepare bone scaffolds with photocatalytic antibacterial function via selective laser *** results showed that TiO_(2)grew on the surface of rGO and formed a covalent bond connection(Ti-O-C)with rGO.A decreased electrochemical impedance of TiO_(2)@rGO composites was observed,and the transient photocurrent intensity increased from 0.05 to 0.5μA/cm^(2).Analysis of electron spin resonance found that the photocatalytic products of TiO_(2)were·OH and·O^(2-),two kinds of ROS capable of killing bacteria via disrupting the structure of the bacterial membrane in *** experiments showed that the PLLA/TiO_(2)@rGO scaffolds had good antibacterial properties against Escherichia coli and Staphylococcus ***,we report that these scaffolds exhibited both enhanced mechanical properties due to the addition of TiO_(2)@rGO as a reinforcement material and good biocompatibility during cell proliferation.

摘要：The development of low-cost,highly active platinum(Pt)-based electrocatalysts for oxygen reduction reaction(ORR)is crucial for widespread applications of fuel *** effective approach lies in alloying Pt with non-noble transition metals to modulate the physicochemical state of the Pt ***,fundamental challenges remain in understanding the structure-performance relationship due to the complexity of composition,crystal type,and surface structure during the alloying *** this study,we synthesized a series of PtCo bimetallic solid solutions with varying ratios using a liquid-phase synthesis *** exploiting the characteristics of solid solutions,the resulting PtCo bimetallic alloy maintains the face-centered cubic crystal structure of pure platinum,minimizing the complexities introduced during alloying and facilitating mechanism ***,under controlled alloy composition and crystal structure,we investigated the dependence of the electrocatalytic activity for the oxygen reduction reaction on the surface strain of the platinum *** S-PtCo-SNPs cathode designed accordingly endows both proton exchange membrane fuel cell(PEMFC)(2.08 W cm^(−2) at 4 A cm^(−2))and Zn-air battery(ZAB)(143.1 mW cm^(−2) at 214.5 mA cm^(−2))with outstanding performance.

摘要：Machine learning (ML) has been widely used todesign and develop new materials owing to its low computational cost and powerful predictive capabilities. In recentyears, the shortcomings of ML in materials science have gradually emerged, with a primary concern being the scarcity ofdata. It is challenging to build reliable and accurate ML modelsusing limited data. Moreover, the small sample size problemwill remain long-standing in materials science because of theslow accumulation of material data. Therefore, it is importantto review and categorize strategies for small-sample learningfor the development of ML in materials science. This reviewsystematically sorts the research progress of small-samplelearning strategies in materials science, including ensemblelearning, unsupervised learning, active learning, and transferlearning. The directions for future research are proposed, including few-shot learning, and virtual sample *** importantly, we emphasize the significance of embedding material domain knowledge into ML and elaborate on thebasic idea for implementing this strategy.

摘要：In this paper, we present the design of multilayer microwave absorbers comprised of Co Fe alloy nano-particles and nano-flakes as fillers. The thickness of the unite layer is optimized by using the Genetic Algorithm. Efficient microwave absorptions over a wide frequency band and a range of incident angles are achieved by using multilayer absorbers. We show that the absorbers are effective not only for a planar surface but also for arbitrarily shaped objects as well.

摘要：The A–D–A′–D–A-type non-fused ring electron acceptors(NFREAs),consisting of electron-donating unit(D)as the bridge to link electron-accepting units(A and A′),have emerged as promising electron acceptors for organic solar cells(OSCs)and organic photodetectors(OPDs).As the units are linked by the carbon–carbon single bonds,these electron acceptors generally possess feasible synthesis and tunable optoelectronic ***,the recent progress of A–D–A′–D–A-type NFREAs is reviewed,including molecular design,device performance,structure–property relationships,and their applications in OSCs and ***,we discuss the challenges and propose the perspectives for the further development of A–D–A′–D–A-type NFREAs.

摘要：To resolve problems of complicated clutter, fast-varying scenes, and low signal-clutterratio （SCR） in application of target detection on sea for space-based radar （SBR）, a target detection approach based on adaptive waveform design is proposed in this paper. Firstly, complicated sea clutter is modeled as compound Gaussian process, and a target is modeled as some scatterers with Gaussian reflectivity. Secondly, every dwell duration of radar is divided into several sub-dwells. Regular linear frequency modulated pulses are transmitted at Sub-dwell 1, and the received signal at this sub-dwell is used to estimate clutter covariance matrices and pre-detection. Estimated matrices are updated at every following sub-dwell by multiple particle filtering to cope with fast-varying clutter scenes of SBR. Furthermore, waveform of every following sub-dwell is designed adaptively according to mean square optimization technique. Finally, principal component analysis and generalized likelihood ratio test is used for mitigation of colored interference and property of constant false alarm rate, respectively. Simulation results show that, considering configuration of SBR and condition of complicated clutter, 9 dB is reduced for SCR which reliable detection requires by this target detection approach. Therefore, the work in this paper can markedly improve radar detection performance for weak targets.

摘要：This paper describes the optimization of the impeller having splitters for a turbo *** design variables,chord of splitter and pitch of splitter,are introduced to enhance the blower *** pressure and ef-ficiency are selected as an object function,and the optimization of the blower impeller is performed by a response surface method (RSM).Three-dimensional Navier-Stokes equations are introduced to analyze the internal flow of the blower and to find the value of the object function for each *** the shape optimization of the splitters attached to the impeller in the turbo blower,pressure and efficiency at the design flow condition are suc-cessively increased by 5.9 percent and 17.9 percent respectively based on the reference *** higher blower efficiency obtained by optimization of impeller having splitters is mainly caused by reducing the number of im-peller blades and optimal design of splitters in the blade passage while pressure increase keeps almost the same with the reference *** the object function of pressure,pressure increase is obtained at the design and off-design conditions while efficiency keeps higher compared to the reference *** enhancement of blow-er performance is due to the reduction of reverse and circulation flows in the blade passage.