摘要：Breaching of embankments has recently drawn more and more attention due to its importance in the development of early warning systems for embankment failures,in the evacuation plans of people at risk,in the design method of embankments based on a risk-approach,etc. The erosion process observed during embankment breaching tests in the laboratory and the analysis of the results are described in this paper. Five embankments,one constructed with pure sand,four with different sand-silt-clay mixtures were tested. The height of the embankments was 75 cm and the width at the crest was 60 cm. Examination of the data from these tests indicated that headcut erosion played an important role in the process of breach growth in the embankments made of cohesive soil mixtures. Flow shear erosion,fluidization of the headcut slope surface,undermining of the headcut due to impinging jet scour and discrete soil mechanical slope mass failure from the headcut were all observed during these tests. For the embankment constructed with pure sand,the breach erosion process was dominated by shear erosion,which led to a gradual and relatively uniform retreat of the downstream slope. The cohesive proportion in the sand-silt-clay mixtures strongly slowed down the erosion process.

摘要：纳米技术在药学领域的应用表现为药物的靶向传递和纳米级粒子药物。纳米药物的风险表现为对人健康的风险和对环境损害的风险。应对纳米药物带来的风险和伦理问题,需要创建风险评估标准;维护人的知情权和自主权;遵守自然规律,严格规范生产设计;强化政策导向、监督管理和法律保障。

摘要：带有连续变化纤维角度铺层的复合材料被称为变刚度复合材料,因为不断变化的纤维取向导致了每层的刚度在不同的空间位置各不相同。设计者便可以由此去调整内在载荷分布,提高结构有效性。

摘要：建立了一种新型纯数字式加速度传感器的理论模型,通过检测吸合时间差检测加速度.该传感器不存在吸合电压的限制,避免了寄生电容的影响,其芯片面积远小于传统电容式加速度传感器;由于输出时间信号,可采用简单的纯数字接口电路检测.理论分析表明,质量块在两个检测电极之间的吸合时间差ΔT与加速度成正比关系,通过检测ΔT的变化即可检测加速度,其灵敏度、非线性与传统电容式加速度传感器相当.设计了一个悬臂梁-质量块结构的加速度传感器,芯片有效面积仅为0.03mm2,模拟结果显示,工作电压为8V,加速度为1gn时,吸合时间的变化ΔT为1.0554μs.采用TTL电路进行检测,其分辨率可以达到0.01gn,满量程±10gn工作时,非线性度为1.23%.

摘要：比较了CAVALLINI的纯质和混合工质水平内螺纹管中流动沸腾换热系数的关联式,结果显示在内螺纹管中,对近共沸混合工质R404A的沸腾换热系数进行工程计算时,R404A被看作纯质和混合工质计算所得的沸腾换热系数值差别最大不到10%,因此可将其以纯质对待;对CAVALLINI的纯质和混合工质、KOYAMA及THOME等四个水平内螺纹管流动沸腾换热系数的影响因素进行对比分析,结果表明R404A的沸腾换热中对流沸腾换热占主导地位,且随干度增加而增加。对关联式的理论预测和实验结果进行对比,表明CAVALLINI和THOME关联式的预测误差小于21%,因此它们对R404A适用性较好,这对R404A蒸发器的工程设计及优化具有一定参考意义。

摘要：将R22的两种新型替代工质R290和R404A在光管和内螺纹管中的沸腾换热压降实验结果与Lockhart&Martinelli压降计算关联式预测结果进行了比较,并依据工质R290和R404A在内螺纹管中的实验压降值对Lockhart&Martinelli压降计算关联式进行了修正。结果表明Lockhart&Martinelli关联式对R404A在光管和内螺纹管的沸腾换热摩擦压降,均有良好的预测精度,平均偏差分别为-11.52%和-17.86%。Lockhart&Martinelli关联式可以较好的预测R290在光管内的沸腾换热摩擦压降,平均偏差为-21.68%;经修正后的Lockhart&Martinelli关联式可以较好的预测R290在在内螺纹管中的沸腾换热摩擦压降,Lockhart&Martinelli关联式乘上修正系数2.06后的修正值与实验值偏差较小,平均偏差为2.37%。研究结果对R290和R404A蒸发器的工程设计及优化具有一定参考意义。

摘要：设计了一种用于测量系统的20位精度带通Σ-Δ调制器。采用低失真离散时间单环4阶1比特量化结构,以实现高精度的指标。对带通调制器中最关键的模块—谐振子进行了研究,设计了一种对电容非线性和失配不敏感并具有精确谐振频率的高Q值谐振子。仿真结果表明,该调制器在100 kHz中频处20 Hz带宽内实现了20位分辨率。本调制器采用AMI 0.35μm标准CMOS工艺实现,整个调制器的总面积仅为2.5 mm2,在3.3 V供电电压下,调制器的总功耗仅为4 mW。

摘要：Places of large potentials of sustainable energy production and places of large energy consumption are often very different and separated by large distances across the globe. This paper first discusses potentials of solar technology in terms of global availability using PV (photovoltaic) technology and actual energy production. Solar energy is widely under-used and one way to reduce this is to improve production in low-energy places with high demand: large cities. According to this option, about 40% of the electricity consumption in the built environment could be produced by solar PV systems and energy storage systems. This paper discusses conditions in the built environment and functional and design qualities enabling an increased diffusion of the technologies. In a comparative analysis of PV technologies, the criteria taken into account encompass efficiency of the type of solar cell and commercial availability. Special attention is paid to the design features of different PV systems, like flexibility, colour and transparency that might help in their utilization as integrated in building material and ornaments in modern architecture. The same procedure is followed for electricity storage devices. The preliminary conclusion is that at present the freedom of design is largest for a combination of crystalline silicon PV cells and Li-ion batteries.

摘要：Sustainable architecture is complex. Many aspects, differently important to many stakeholders, are to be optimized. BIM should be used for this. Building Information Modellingis a collaborative process where all stakeholders integrate and optimize their information in a digital 3D model. Sometimes it is called Green BIM. But what exactly is that Is the International Standard Organization IFC standard useful for this And is it compatible with new developments in parametric design Advantages and disadvantages of BIM are listed. Full parametric design is needed because it keeps the design flexible and open for changes until the end of the design process. However it is not compatible with IFC; only object parametric design is. A possible way out of this paradox could be the use of scripts that only create objects if they are not already in the BIM database and otherwise only adapt their properties. An example of parametric sustainable architectural design explains the mentioned issues.

摘要：采用粒度谱的计算方法分析高浊度河口混合环境下悬浮泥沙和表层沉积物的交换过程,研究悬浮泥沙在河口—陆架系统的输移和归宿问题。分析表明:(1)大约有47%的悬浮泥沙沉积在长江口拦门沙海域及水下三角洲前缘,超过50%的悬浮泥沙摆脱河口的"束缚"进入杭州湾以及向南沿浙闽海岸输运,122.5°～123°E是长江悬浮泥沙向东扩散的重要界限。本文提供的粒度谱计算方法可适用于多种潮汐环境的泥沙输运和沉积的定量计算。(2)长江口悬浮泥沙与表层沉积物高交换区(交换率>0.6)主要分布在南槽口外的泥质区和杭州湾附近海域,其中长江口外泥质区的交换率高达0.9以上,说明该区域悬浮泥沙大量参与供沙和造床过程。在10～100年尺度上,长江口南槽口外的泥质区和杭州湾存在着一个显著的沉积中心,其泥沙交换速率可高达2～3cm/a以上。(3)由于受沿岸流和台湾暖流的影响,从长江口输出的大部分悬浮泥沙首先沉积在长江口南槽口外的泥质区,随后在潮流的作用下向长江口、杭州湾和沿海岸向南输运,泥质区充当了长江口系统泥沙输运和入海泥沙向南输送的"泥库"。长江口泥质区既是长江入海泥沙向口外输送的泥沙"汇",也是涨潮输入长江河口和杭州湾、浙闽沿岸泥质带的泥沙"源"。(4)由于长江口外余流向南槽口外汇聚,南槽口外含沙量较高,而且长江口水下三角洲前缘潮滩仍处于缓慢淤涨状态,上述水动力和地貌的综合分析证实了长江口外泥质区的"泥库"效应。在长江入海泥沙减少的背景下,"泥库"对河口地貌发育的贡献明显;随着流域减沙的不可逆转,口门附近的"泥库"将发挥愈来愈重要的向河口系统供沙的功能。