摘要：This paper describes the design and construction of the Taban tokamak, which is located in Amirkabir university of Technology, tehran, Iran. The Taban tokamak was designed for plasma investigation. The design, simulation and construction of essential parts of the Taban tokamak such as the toroidal field(TF) system, ohmic heating(OH) system and equilibrium field system and their power supplies are presented. For the Taban tokamak, the toroidal magnetic coil was designed to produce a maximum field of 0.7 T at R?=?0.45 m. The power supply of the TF was a130 kJ, 0–10 kV capacitor bank. Ripples of toroidal magnetic field at the plasma edge and plasma center are 0.2% and 0.014%, respectively. For the OH system with 3 kA current, the stray field in the plasma region is less than 40 G over 80% of the plasma volume. The power supply of the OH system consists of two stages, as follows. The fast bank stage is a 120 μF, 0–5 k V capacitor that produces 2.5 kA in 400 μs and the slow bank stage is 93 mF, 600 V that can produce a maximum of 3 kA. The equilibrium system can produce uniform magnetic field at plasma volume. This system’s power supply, like the OH system, consists of two stages, so that the fast bank stage is 500 μF, 800 V and the slow bank stage is 110 mF, 200 V.

摘要：Increasing evidence indicates that engineered nerve grafts have great potential for the regeneration of peripheral nerve injuries(PNIs).While most studies have focused only on the topographical features of the grafts,we have considered both the biophysical and biochemical manipulations in our applied *** achieve this,we fabricated an electrospun nanofibrous scaffold(ENS)containing polylactide nanofibers loaded with lithium(Li)ions,a Wnt/β-catenin signaling *** addition,we seeded human adipose-derived mesenchymal stem cells(hADMSCs)onto this engineered scaffold to examine if their differentiation toward Schwann-like cells was *** further examined the efficacy of the scaffolds for nerve regeneration in vivo via grafting in a PNI rat *** results showed that Li-loaded ENSs gradually released Li within 11 d,at concentrations ranging from 0.02 to(3.64±0.10)mmol/L,and upregulated the expression of Wnt/β-catenin target genes(cyclinD1 and c-Myc)as well as those of Schwann cell markers(growth-associated protein 43(GAP43),S100 calcium binding protein B(S100B),glial fibrillary acidic protein(GFAP),and SRY-box transcription factor 10(SOX10))in differentiated *** the PNI rat model,implantation of Li-loaded ENSs with/without cells improved behavioral features such as sensory and motor functions as well as the electrophysiological characteristics of the injured *** improved function was further validated by histological analysis of sciatic nerves grafted with Li-loaded ENSs,which showed no fibrous connective tissue but enhanced organized myelinated *** potential of Li-loaded ENSs in promoting Schwann cell differentiation of hADMSCs and axonal regeneration of injured sciatic nerves suggests their potential for application in peripheral nerve tissue engineering.

摘要：This article deals with the evaluation of the consumption of energy for a steady state solvent extraction in a novel L-shaped pulsed sieve-plate column, which is highly required for design and optimization of the periodic flow processes for industrial applications. In this regard, a comprehensive evaluation on the energy consumption in case of a pulsed flow for three different chemical systems is conducted and besides the influence of pulsation intensity, the effect of geometrical parameters including the plate spacing and the plate free area is investigated as well. Moreover, the concept of characteristic velocity models at flooding points is evaluated with respect to the variation of pressure drop along the column at different operational conditions.

摘要：Due to outstanding ductility and high strength,the steel plate shear wall(SPSW)is recognized as a good lateral system for building structures; particularly as it interacts with earthquake resistant *** study aims to reveal the dynamic and cyclic behavior of steel plated shear *** element method of analysis was implemented in order to simulate the behavior of such a wall *** determine the dynamic behavior of un-stiffened plate shear wall,two different analytical models were *** post buckling strength of steel plate subjected to lateral loading was also *** story shear-drift diagrams of steel shear wall system were *** strength and ductility of the system obtained from the analysis were compared with those of steel shear wall tests reported *** pertinent parameters of the steel shear wall system such as plate thickness,column and beam stiffness and the plate aspect ratio were recognized and their effects were *** effect of stiffeners on the behavior of the SPSW was also investigated.

摘要：Experimental design was applied in the optimization of crude oil adsorption from saline waste water using raw *** application of response surface methodology(RSM) was presented with temperature,salinity of water,pH,adsorbent dose,and initial oil content as factors.A quadratic model could be used to approximate the mathematical relationship of crude oil removal on the five significant independent *** values and experimental values are found to be in good agreement with R2 of 97.44%.The result of optimization shows that the maximum crude oil removal is equal to 67.38% under the optimal condition of temperature of 46.53 °C,salinity of 37.2 g/L,pH of 3,adsorbent dose of 9 g/L and initial oil content of 300×10-6.

摘要：In this paper, a hybrid neural-genetic fuzzy system is proposed to control the flow and height of water in the reservoirs of water transfer networks. These controls will avoid probable water wastes in the reservoirs and pressure drops in water distribution networks. The proposed approach combines the artificial neural network, genetic algorithm, and fuzzy inference system to improve the performance of the supervisory control and data acquisition stations through a new control philosophy for instruments and control valves in the reservoirs of the water transfer networks. First, a multi-core artificial neural network model, including a multi-layer perceptron and radial based function, is proposed to forecast the daily consumption of the water in a reservoir. A genetic algorithm is proposed to optimize the parameters of the artificial neural networks. Then, the online height of water in the reservoir and the output of artificial neural networks are used as inputs of a fuzzy inference system to estimate the flow rate of the reservoir inlet. Finally, the estimated inlet flow is translated into the input valve position using a transform control unit supported by a nonlinear autoregressive exogenous model. The proposed approach is applied in the tehran water transfer network. The results of this study show that the usage of the proposed approach significantly reduces the deviation of the reservoir height from the desired levels.

摘要：For tunnels being excavated through multiple knowledge of the aquifers’hydraulic head becomes essential for determining groundwater inflow into the tunnel and analyzing its stability,specifically using multilevel monitoring *** the multi-aquifer alluvial section of the Glas tunnel(Iran),since the hydraulic head calculations were based on the data obtained from single-piezometer boreholes,the excavation risk was assessed to be at high level and the tunnel seemed to be unstable,thus an incorrect conclusion was derived from the misleading *** take cost mitigation measures into account,it was necessary to calculate the hydraulic head at tunnel level *** installing nested and clustered wells the mean hydraulic head was measured to be 70 m,significantly different from the 90 m previously determined by *** the updated value,the groundwater inflow and bulkhead load,formerly calculated as 0.65 m^(3)/s and 9.5 bars,were determined to be 0.49 m^(3)/s and 7.5 bars,respectively.

摘要：Recently XML has become a standard for data representation and the preferred method of encoding struc- tured data for exchange over the Internet. Moreover it is fre- quently used as a logical format to store structured and semi- structured data in databases. We propose a model-driven and configurable approach for modeling hierarchical XML data using object role modeling （ORM） as a flat conceptual model. First a non-hierarchical conceptual schema of the problem domain is built using ORM and then different hierarchical views of the conceptual schema or parts of it are specified by the designer using transformation rules. A hierarchical mod- eling notation called H-ORM is proposed to show these hier- archical views and model more complex semi-structured data constructs and constraints. We also propose an algorithm to map hierarchical H-ORM views to XML schema language.

摘要：The adsorption of the bentonite toward Ni(II) from aqueous solution was studied to obtain optimum conditions,equilibrium model,thermodynamic and kinetic *** method was used to evaluate maximum amount of adsorbed Ni(II).In this work,p H of solution during stirring,contact time,initial Ni(II) concentration,particle size of bentonite and amount of bentonite were considered as effective parameters which should be *** increase of temperature has negative effect on the Ni(II) *** equilibrium data were correlated well with Freundlich and Dubinin–Radushkevich isotherm models the correlation coefficients of which are(R^2) 0.994 and 0.971,*** model indicates heterogeneous and chemical absorption or ion exchange *** values of thermodynamic parameters such as ΔH°,ΔS° and ΔG° of nickel adsorption reveal that it is a spontaneous,exothermic and associative *** experimental data fit the pseudo-second-order kinetic very well with correlation coefficient(R^2) more than 0.995.

摘要：In this article, the sediment transport processes in the Khuran Strait between the mainland Iran and Qeshm Island at North Central Persian Gulf are studied in regional scale in a comprehensive manner. The objectives of this study include defining the type and origin of the sediment, the influencing factors, and the dominant mode of sediment transport. Four possible scenarios of sediment processes in terms of sediment sources and influential environmental forces are examined. The results of the conceptual and 2D numerical model of MIKE21 applied for this purposes indicate that the sediment sources in the transport processes are mainly provided by the sediments suspended from the central and eastern zones of the strait bed. Other sources including input from rivers do not have direct influence on the processes. The results are applied to the study of morphological changes for engineering applications including the pattern and amount of deposit in the Rajaee port approach channel and harbor basin. The pattern and amount of annual sediment deposits in the approach channel predicted by the model is satisfactory, compatible with annual dredging records.