摘要：This paper proposes a kind of programmable logic element(PLE)based on Sense-Switch pFLASH *** programming Sense-Switch pFLASH,all three-bit look-up table(LUT3)functions,partial four-bit look-up table(LUT4)functions,latch functions,and d flip flop(DFF)with enable and reset functions can be *** PLE uses a choice of operational logic(COOL)approach for the operation of logic functions,it allows any logic circuit to be implemented at any ratio of combinatorial logic to *** intrinsic property makes it close to the basic application specific integrated circuit(ASIC)cell in terms of fine granularity,thus allowing ASIC-like cell-based mappers to apply all their optimization *** measuring Sense-Switch pFLASH and PLE circuits,the results show that the“on”state driving current of the Sense-Switch pFLASH is about 245.52μA,and that the“off”state leakage current is about 0.1 *** programmable function of PLE works *** delay of the typical combinatorial logic operation AND3 is 0.69 ns,and the delay of the sequential logic operation DFF is 0.65 ns,both of which meet the requirements of the design technical index.

摘要：Cortical electrodes are a powerful tool for the stimulation and/or recording of electrical activity in the nervous ***,the inevitable wound caused by surgical implantation of electrodes presents bacterial infection and inflammatory reaction risks associated with foreign body ***,inflammation of the wound area can dramatically worsen in response to bacterial *** consequences can not only lead to the failure of cortical electrode implantation but also threaten the lives of ***,we prepared a hydrogel made of bacterial cellulose(BC),a flexible substrate for cortical electrodes,and further loaded antibiotic tetracycline(TC)and the anti-inflammatory drug dexamethasone(DEX)onto *** encapsulated drugs can be released from the BC hydrogel and effectively inhibit the growth of Gram-negative and Gram-positive ***,therapeutic cortical electrodes were developed by integrating the drug-loaded BC hydrogel and nine-channel serpentine arrays;these were used to record electrocorticography(ECoG)signals in a rat *** to the controlled release of TC and DEX from the BC hydrogel substrate,therapeutic cortical electrodes can alleviate or prevent symptoms associated with the bacterial infection and inflammation of brain *** approach facilitates the development of drug delivery electrodes for resolving complications caused by implantable electrodes.

摘要：Herein,two asymmetric hexacyclic fused small molecule acceptors(SMAs),namely BP4F-HU and BP4F-UU,were *** elongated outside chains in the BP4F-UU molecule played a crucial role in optimizing the morphology of blend film,thereby improving charge mobility and reducing energy loss within the corresponding ***,the PM6:BP4F-UU device exhibited a higher open-circuit voltage(V_(oc))of 0.878 V compared to the PM6:BP4F-HU device with a V_(oc)of 0.863 ***,a new wide bandgap SMA named BTP-TA was designed and synthesized as the third component to the PM6:BP4F-UU host binary devices,which showed an ideal complementary absorption spectrum in PM6:BP4F-UU *** addition,BTP-TA can achieve efficient intermolecular energy transfer to BP4F-UU by fluorescence resonance energy transfer(FRET)pathway,due to the good overlap between the photoluminescence(PL)spectrum of BTP-TA and the absorption region of ***,ternary devices with 15wt%BTP-TA exhibits broader photon utilization,optimal blend morphology,and reduced charge recombination compared to the corresponding binary ***,PM6:BP4F-UU:BTP-TA ternary device achieved an optimal power conversion efficiency(PCE)of 17.83%with simultaneously increased V_(oc)of 0.905 V,short-circuit current density(J_(sc))of 26.14 mA/cm^(2),and fill factor(FF)of 75.38%.

摘要：High spatiotemporal resolution brain electrical signals are critical for basic neuroscience research and high-precision focus diagnostic localization,as the spatial scale of some pathologic signals is at the submillimeter or micrometer *** entails connecting hundreds or thousands of electrode wires on a limited *** study reported a class of flexible,ultrathin,highdensity electrocorticogram(ECoG)electrode *** challenge of a large number of wiring arrangements was overcome by a laminated structure design and processing technology *** flexible,ultrathin,high-density ECoG electrode array was conformably attached to the cortex for reliable,high spatial resolution electrophysiologic *** minimum spacing between electrodes was 15μm,comparable to the diameter of a single *** hundred electrodes were prepared with an electrode density of 4444 mm^(-2).In focal epilepsy surgery,the flexible,high-density,laminated ECoG electrode array with 36 electrodes was applied to collect epileptic spike waves inrabbits,improving the positioning accuracy of epilepsy lesions from the centimeter to the submillimeter *** flexible,high-density,laminated ECoG electrode array has potential clinical applications in intractable epilepsy and other neurologic diseases requiring high-precision electroencephalogram acquisition.

摘要：对柔性电子设备日益增长的需求使得开发具有高灵敏度和高线性度的传感器更加迫切.由于拉伸应变下不可逆结构损伤诱导电阻线性急剧增加,现有的可拉伸应变传感器难以完美地同时实现这两个特性.针对这一问题,本文提出了一种兼具表面褶皱和体相梯度孔隙的新型分级互连结构,利用水热活化机制精确控制纳米级褶皱间距,通过调控相分离中热力学和动力学行为构筑出体相梯度多孔结构,通过改变器件两侧曲率实现各向异性特征,深入研究各种设计的功效、量化几何结构对灵敏度的有效贡献和追踪形态演变.基于器件显著的灵敏度和各向异性,所制备的传感器能够有效监测静态和动态位移、表面运动、二维应变信号变化以及预测液位随时间变化.本工作为实现高质量的感知能力提供了一种广泛适用、适应性强、可扩展且具有成本效益的方法.

摘要：A combination of hydrogels and microfluidics allows the construction of biomimetic three-dimensional(3D)tissue models in vitro,which are also known as *** hydrogel patterningwith awell-controlled spatial distribution is typically achieved by embedding sophisticated microstructures to act as a ***,these physical barriers inevitably expose cells/tissues to a less physiologically relevant microenvironment than in vivo ***,we present a novel dissolvable temporary barrier(DTB)strategy that allows robust and flexible hydrogel patterning with great freedom of design and desirable flow stimuli for cellular *** key aspect of this approach is the patterning of a water-soluble rigid barrier as a guiding path for the hydrogel using stencil printing technology,followed by a barrier-free medium perfusion after the dissolution of the *** and multiple tissue compartments with different geometries can be established using either straight or curved DTB *** effectiveness of this strategy is further validated by generating a 3D vascular network through vasculogenesis and angiogenesis using a vascularized microtumor *** a new proof-of-concept in vasculature-on-a-chip,DTB enables seamless contact between the hydrogel and the culture medium in closed microdevices,which is an improved protocol for the fabrication ofmultiorgan ***,we expect it to serve as a promising paradigm for organ-on-a-chip devices for the development of tumor vascularization and drug evaluation in the future preclinical studies.

摘要：随着对X射线成像,特别是对弯曲和不规则物体的三维成像的需求不断增加,高性能柔性闪烁膜的开发引起了人们的极大关注.镧系(Ⅲ)-有机闪烁体由于其在结构设计和光学可调谐方面的巨大灵活性,最近成为一类新的有前途的X射线闪烁体.然而,设计具有高光产额和良好溶液分散性的镧系元素(Ⅲ)-有机闪烁体仍然具有挑战性.本文报道了一种具有高效X射线激发发光(XEL)和良好溶液分散性的铕-钛氧簇合物(Eu-TiOCs)闪烁体.笼状镧-钛氧原子簇核作为X射线吸收剂,产生高能电子并引发二次电子热弛豫.有机配体作为能量转移桥和天线,通过级联能量转移来敏化Ln^(3+);离子的发光.Eu-TiOCs闪烁体表现出高的稳态X射线光产额(高达26,816±2000 photons MeV^(-1)).此外,EuTiOCs闪烁体和聚合物的羟基之间的弱氢键相互作用增强了Eu-TiOCs的溶液分散性,有利于制备低光散射和均匀闪烁膜.铕-钛氧簇与聚合物之间的通过无机簇笼和有机配体之间的协同作用,所得到的柔性闪烁膜对平面和非平面物体都表现出的高空间分辨率和低剂量X射线成像.本工作为进一步设计和制备高性能X射线闪烁体和高分辨率柔性闪烁膜提供了新思路.

摘要：Modern medicine is increasingly interested in advanced sensors to detect and analyze biochemical *** sensors based on potentiometric methods are a promising platform for monitoring physiological ions in biological *** semi-implantable devices are mainly based on single-parameter *** semi-implantable electrodes for multiparameter sensing have more restrictions on the electrode size due to biocompatibility considerations,but reducing the electrode surface area could potentially limit electrode *** study developed a semi-implantable device system comprising a multiplexed microfilament electrode cluster(MMEC)and a printed circuit board for real-time monitoring of intra-tissue K^(+),Ca^(2+),and Na^(+)*** electrode surface area was less important for the potentiometric sensing mechanism,suggesting the feasibility of using a tiny fiber-like electrode for potentiometric *** MMEC device exhibited a broad linear response(K^(+):2–32 mmol/L;Ca^(2+):0.5–4 mmol/L;Na^(+):10–160 mmol/L),high sensitivity(about 20–45 mV/decade),temporal stability(>2weeks),and good selectivity(>80%)for the above *** vitro detection and in vivo subcutaneous and brain experiment results showed that the MMEC system exhibits good multi-ion monitoring performance in several complex *** work provides a platform for the continuous real-time monitoring of ion fluctuations in different situations and has implications for developing smart sensors to monitor human health.

摘要：二维过渡金属硫族化合物(TMDCs)材料被认为是拓展摩尔定律的极具前景的候选材料.然而,该材料的低光致发光效率严重限制了其实际应用,其本质源于材料制备中不可避免引入的缺陷.在本文中,我们报道了一种Sr掺杂单层MoS_(2)的有效缺陷工程策略,该策略在实验上通过简便的化学气相沉积(CVD)一步法成功实现.所制备的具有亚毫米(~324μm)级的大尺寸样品的光致发光可实现高达两个数量级的增强,并伴随着载流子寿命的显著增强.这一现象主要归因于Sr掺杂后MoS_(2)体系中其三激子向激子转换.与此同时,掺杂样品的辐射质量和稳定性也显著提升.第一性原理计算进一步阐明了其调控机制,即在MoS_(2)中引入适当互补缺陷能级与其自身的缺陷能级协同,从而可调节其载流子组分,以实现光致发光的显著增强.此外,我们的缺陷工程策略也适用于其他掺杂剂,如钙掺杂剂.我们的工作报告了一种可以显著提升单层MoS_(2)的荧光性能的有效缺陷工程策略,这为设计和调控二维TMDCs的光电特性提供一种极具前途的方法.

摘要：量子点发光二极管(QLED)溶液法制备的特点和喷墨打印高度契合,在印刷显示器领域展现出巨大的应用潜力.制作QLED器件时,下层薄膜的表面能对上层薄膜的铺展起着至关重要的作用,高表面能可以促进不同功能膜层之间的紧密接触并减少漏电流.然而,已报道的交联空穴传输材料(HTM)低的表面能不利于喷墨打印.在此,我们通过分子设计开发了一种可交联HTM及其聚合物,新的聚合物命名为[9-(4-(乙氧基甲基)苯基)-3-(7-(9-(4-(己炔基)乙氧基甲基)苯基)-9H-咔唑-3-基)-9H-芴]-9H-咔唑(PDA-FLCZ),由3,3′-(9,9-二甲基-9H-芴-2,7-二基)双[9-(4-(丙-2-炔-1-氧基)甲基)苯基]-9H-咔唑(DA-FLCZ)聚合得到.这种新型HTM采用原位光热交联和预聚后热交联两种交联策略,都可以在较低的交联温度下形成稳定的网络结构,具有优异的耐溶剂性和较高的表面能.通过优化交联工艺,交联PDA-FLCZ薄膜实现了更高的空穴迁移率和更低的陷阱密度,其对应的旋涂QLED器件的最大外量子效率(EQE)达到17.59%,比基于DA-FLCZ的器件(14.25%)高出23%.此外,基于交联PDA-FLCZ的喷墨打印QLED显示出15.28%的最大EQE,接近其旋涂器件值的90%.