摘要：Multispectral and polarization cameras that can simultaneously acquire the spatial,spectral,and polarization characteristics of an object have considerable potential applications in target detection,biomedical imaging,and remote *** this work,we develop a common-aperture optical system that can capture multispectral and polarization *** off-axis three-mirror optical system is mounted on the front end of the proposed system and used as a common-aperture telescope in the visible light(400 nm-750 nm)and long-wave infrared(LWIR,8μm-12μm)*** system can maintain a wide field of view(4.5°)and it can demonstrate an enhanced identification *** off-axis three-mirror system gets rid of central obscuration while further yielding stable system resolution and *** that has passed through the front-end common-aperture reflection system is divided into the visible light and LWIR waveband by a *** two wavebands then converge on two detectors through two groups of *** simulation results indicate that the proposed system can obtain clear images in each waveband to meet the diverse imaging requirements.

摘要：Refractive index inhomogeneity is one of the important characteristics of optical coating material, which is one of the key factors to produce loss to the ultra-low residual reflection coatings except using the refractive index inhomogeneity to obtain gradient-index coating. In the normal structure of antireflection coatings for center wavelength at 532 nm, the physical thicknesses of layer H and layer L are 22.18 nm and 118.86 nm, respectively. The residual reflectance caused by refractive index inhomogeneity（the degree of inhomogeneous is between -0.2 and 0.2） is about 200 ppm, and the minimum reflectivity wavelength is between 528.2 nm and 535.2 nm. A new numerical method adding the refractive index inhomogeneity to the spectra calculation was proposed to design the laser antireflection coatings, which can achieve the design of antireflection coatings with ppm residual reflection by adjusting physical thickness of the couple layers. When the degree of refractive index inhomogeneity of the layer H and layer L is-0.08 and 0.05 respectively, the residual reflectance increase from zero to 0.0769% at 532 nm. According to the above accuracy numerical method, if layer H physical thickness increases by 1.30 nm and layer L decrease by 4.50 nm, residual reflectance of thin film will achieve to 2.06 ppm. When the degree of refractive index inhomogeneity of the layer H and layer L is 0.08 and -0.05 respectively, the residual reflectance increase from zero to 0.0784% at 532 nm. The residual reflectance of designed thin film can be reduced to 0.8 ppm by decreasing the layer H of 1.55 nm while increasing the layer L of 4.94 nm.

摘要：Design and preparation of multilayer optical coatings are investigated on laser crystal Nd：YVO4, YVO4, and frequency doubling crystal KTP substrate. Multilayer optical coatings are deposited on one surface of the crystals using the ion beam sputtering technique, and the other surface is coated with a single SiO2 as protective layer. For the YVO4 crystal after coating, the reflectivity at 1 064 and 532 nm are greater than 99.9% and 99.8%, respectively, and the transmissivity at 808 nm is greater than 91.5%. For the KTP crystal after coating, the reflectivity at 1064 nm is greater than 99.95%, and the transmissivity at 532 nm is greater than 99.5%. After thermal annealing, the transmissivity can be improved. The obtained coated crystals can be used in high Dower solid-state lasers.