摘要：A hybrid CFD/characteristic method(CCM) was proposed for fast design and evaluation of hypersonic inlet flow with nose bluntness, which targets the combined advantages of CFD and method of characteristics. Both the accuracy and efficiency of the developed CCM were verified reliably, and it was well demonstrated for the external surfaces design of a hypersonic forebody/inlet with nose bluntness. With the help of CCM method, effects of nose bluntness on forebody shock shapes and the flowfield qualities which dominate inlet performance were examined and analyzed on the two-dimensional and axisymmetric configurations. The results showed that blunt effects of a wedge forebody are more substantial than that of related cone cases. For a conical forebody with a properly blunted nose, a recovery of the shock front back to that of corresponding sharp nose is exhibited, accompanied with a gradually fading out of entropy layer effects. Consequently a simplification is thought to be reasonable for an axisymmetric inlet with a proper compression angle, and a blunt nose of limited radius can be idealized as a sharp nose, as the spillage and flow variations at the entrance are negligible, even though the nose scale increases to 10% cowl lip radius. Whereas for two-dimensional inlets, the blunt effects are substantial since not only the inlet capturing/starting capabilities, but also the flow uniformities are obviously degraded.

摘要：The reduced-order model （ROM） for the two-dimensional supersonic cavity flow based on proper orthogonal decomposition （POD） and Galerkin projection is investigated. Presently, popular ROMs in cavity flows are based on an isentropic assumption, valid only for flows at low or moderate Mach numbers. A new ROM is constructed involving primitive variables of the fully compressible Navier-Stokes （N-S） equations, which is suitable for flows at high Mach numbers. Compared with the direct numerical simulation （DNS） results, the proposed model predicts flow dynamics （e.g., dominant frequency and amplitude） accurately for supersonic cavity flows, and is robust. The comparison between the present transient flow fields and those of the DNS shows that the proposed ROM can capture self-sustained oscillations of a shear layer. In addition, the present model reduction method can be easily extended to other supersonic flows.

摘要：An engineering analysis of computing the penetration problem of a steel ball penetrating into fibre-reinforced composite targets is presented. Assume the metal ball is a rigid body, and the composite target is a transversely isotropic elasto-plastic material. In the analysis, a spherical cavity dilatation model is incorporated in the cylindrical cavity penetration method. Simulation results based on the modified model are in good agreement with the results for 3-D Kevlar woven （3DKW） composite anti-penetration experiments. Effects of the target material parameters and impact parameters on the penetration problem are also studied.

摘要：A conduction-cooled superconducting magnet producing a transverse field of 4 T has been designed for a new generation multi-field coupling measurement system, which will be used to study the mechanical behavior of superconducting samples at cryogenic temperatures and intense magnetic fields. A compact cryostat with a two-stage GM cryocooler is designed and manufactured for the superconducting magnet. The magnet is composed of a pair of flat racetrack coils wound by NbTi/Cu superconducting composite wires, a copper and stainless steel combinational former and two Bi2Sr2CaCu20~ superconducting current leads. The two coils are connected in series and can be powered with a single power supply. In order to support the high stress and attain uniform thermal distribution in the superconducting magnet, a detailed finite element （FE） analysis has been performed. The results indicate that in the operating status the designed magnet system can sufficiently bear the electromagnetic forces and has a uniform temperature distribution.

摘要：EPB TBMs(Earth pressure balance Tunneling Boring Machines) are extensively used in tunneling constructions because of its high efficiency and low disturbance on structures above ground. It is critically significant to predict the thrust acting on TBMs under different geological conditions for both the design of power system and the control of tunneling process. The interaction between the cutterhead and the ground is the core of excavation, through which geological conditions determine the thrust re-quirement combined with operating status and structural characteristics. This paper conducted a mechanical decoupling analysis to obtain a basic expression of the cutterhead-ground interactive stress. Then more engineering factors(such as cutterhead topological structure, underground overburden, thrusts on other parts, etc.) were further considered to establish a predicting model for the total thrust acting on a machine during tunneling. Combined with three subway projects under different geological conditions in China, the model was verified and used to analyze how geological, operating and structural parameters influence the acting thrust.

摘要：A harmonic diffractive element (HDE) is first successfully introduced to the athermal system of infrared dual band in this paper. In this system, there are only three lens and two materials, silicon and germanium. When the temperature ranges from 70℃ to 100℃ in the dual band, it can simultaneously accomplish the rectification of the longitudinal aberration in the big field of view, as well as the wave front aberration less than 1/4 wavelength. Modulation transfer function of dual band approaches or attains the diffraction limit. The calculation results show that the spec-tral properties of the HDE are between refractive and dif-fractive elements, so we can design a simple dual-band and athermal optical system by selecting the thickness and cen-tral wavelength of the HDE exactly. Compared with a con-ventional refractive optical system, this system not only re-duces the demand for high technical levels, but also has a compact structure, few elements, a high transmittance better aberrations performances and athermal character. At the same time, the use of the HDE also offers a new element for the infrared optics design.

摘要：Microstructures and mechanical properties of dual-phase AlxCrMnFeCoNi (x=0.4, 0.5, 0.6, at.%) alloys were investigated. Thermomechanical processing leads to a microstructural evolution from cast dendritic structures to equiaxed ones, consisting of face-centered cubic (fcc) and body-centered cubic (bcc) phases in the two states. The volume fraction of bcc phase increases and the size of fcc grain decreases with increasing Al content, resulting in remarkably improved tensile strength. Specifically, the serrated flow occurring at the medium temperatures varies from type A+B to B+C or C as the testing temperature increases. The average serration amplitude of these Al-containing alloys is larger than that of CoCrFeNiMn alloy due to the enhanced pinning effect. The early small strain produces low-density of dislocation arrays and bowed dislocations in fcc grains while the dislocation climb and shearing mechanism dominate inside bcc grains. The cross-slip and kinks of dislocations are frequently observed and high-density-tangled dislocations lead to dislocation cells after plastic deformation with a high strain.

摘要：Responsive soft materials capable of complex,reversible,and rapid geometric deformations under external stimuli hold significant potential for applications in minimally invasive medicine,wearable devices,and soft *** this study,we present a novel approach for designing reconfigurable three dimensional(3D)deformable magnetic soft materials through photothermal *** embedding hard magnetic particles within a polymer matrix composed of fibrous polypyrrole(PPy)and semi-crystalline polymer,we develop magnetic composites that can be remotely controlled to achieve precise,programmable deformations under an external magnetic *** key innovation lies in utilizing the photothermal effect of PPy,which temporarily alters the viscosity of the composite when irradiated with infrared light,allowing dynamic orientation of the magnetic *** cooling,the magnetic anisotropy is solidified,enabling rapid and reversible geometric *** method allows for intricate control over the magnetization distribution,leading to the development of multifunctional devices with various potential applications such as complex 3D deformations for soft robotics,multimodal electrical switches,rewritable quick response codes,and shape-adaptable *** study not only enhances the understanding of magnetic moment programming in soft materials but also opens new avenues for the design of adaptive and responsive materials for advanced technological applications.

摘要：Although the structured light system that uses digital fringe projection has been widely implemented in three-dimensional surface profile measurement, the measurement system is susceptible to non-linear error. In this work, we propose a convenient look-up-table-based （LUT-based） method to compensate for the non-linear error in captured fringe patterns. Without extra calibration, this LUT-based method completely utilizes the captured fringe pattern by recording the full-field differences. Then, a phase compensation map is established to revise the measured phase. Experimental results demonstrate that this method works effectively.

摘要：The binding energy and generalized stacking-fault energy (GSFE) are two critical interface properties of two dimensional layered materials, and it is still unclear how neighboring layers affect the interface energy of adjacent layers. Here, we investigate the effect of neighboring layers by comparing the differences of binding energy and GSFE between trilayer heterostructures (graphene/graphene/graphene, graphene/graphene/boron nitride,boron nitride/graphene/boron nitride) and bilayer heterostructures (graphene/graphene,graphene/boron nitride) using density functional theory. The binding energy of the adjacent layers changes from -2.3% to 22.55% due to the effect of neighboring layer, with a very small change of the interlayer distance. Neighboring layers also make a change from -2% to 10% change the GSFE, depending on the property of the interface between adjacent layers. In addition, a new simple expression is proven to describe the GSFE landscape of graphene-like structure with high accuracy.